All:
Export/Import now disabled if the Effect (family) doesn't support it
Options disabled if the Effect (family) doesn't support it
Standarized on "Latency compensation" instead of "Buffer delay compensation"
Correct loading/saving of factory default settings
Fixed "Mannage" to be "Manage"
Removed conditional code since we're keeping the transport buttons
Play bases state on actual playback status
Play no longer monkeys with selection
Play will now start from where it left off IF:
The user stops the playback via the Effect Stop button
If the user wants to restart from the beginning of the selection
then the user can click Rewind while stopped.
Rewind will not go past start of selection (sorry Steve ;-))
If Rewind is clicked while not playing, playback will next
start at beginning of selection.
Fast Forward will stop at end of selection
However, if FFwd is clicked while not playing, it will
put playback at the end of selection and the next time
the user clicks the Effect play button, playback will
continue from the end of selection to the end of track.
Deleting a preset now prompts user to confirm
Button faces should now look a little better
Bypass (should we rename that???) button now grays when disabled
Audio Units:
Corrected all user visible "AudioUnit" strings to be "Audio Unit"
Removed unneeded "Buffer Size" in settings dialog
Only uses latency if user said it was okay
Ladspa:
Added settings dialog to allow control of latency usage
Removed unused "user selectable" buffer size
Only use latency if user wants it
Refresh controls when presets are loaded
VST:
Removed unused "Rescan at startup" setting
Propogate parameter loads to slave effects
Solves the problem of what the "Settings" button should say
by converting it to a bitmap button.
Adds the missing "bypass effect" button.
The Ok/Cancel buttons are now Apply/Close buttons and the
dialog stays open after the apply is done.
Record is no longer disabled when an RTP effect is open as
the RTP effect now monitors when recording starts and disables
its buttons as needed.
Added "Play", "Skip forward", and "Skip backward" buttons.
While the other stuff is required, this last one is in to
get a feel for its usefulness. We'll need to get feedback
on it pretty quickly so we can rip it out if need be.
This should resolve all concerns with the effects windows like:
1) Dropping behind the project window
2) Obscuring other dialogs
3) Keyboard cycling among the active windows
4) Clicking twice to do something in another window
NOTE: VST effects with a Cocoa overlay still require it.
Examples are Blue Cat and GRM.
This does tie an open effect to its parent project, but that should
be okay. We'll need to verify that again once we start to allow
multiple open effects dialogs at once.
I added a few assertions just to be safe. Haven't hit
the particular situations yet, but I've only tested less
than 50 or so AUs.
We were missing a few Apple AUs like panners and mixers.
The plugin "installation" dialog sort is reversed on the Mac...weird
Made the effect windows float on top of the owning project window.
Looking for opinions on which method is best.
Needed to redo a bit of code so that effects would work
without the rack in the middle. I wanted to disconnect
it completely as I'm not sure it something that will be
kept around.
During realtime preview, effects will be applied in the
order their dialogs were opened...hmmm...what happens
if they don't have a dialog??? I look into that.
Fixed the focus target for windows when cycling among
active windows as suggested by David B.
Fixed plugin registration if the plugins were located
in the "Plug-ins" folder. I believe this problem may
have played a role in the duplicate menu items.
They now work on Yosemite.
AudioUnits with a custom Cocoa UI now display graphically
instead of reverting to the generic view
The Cocoa version of the generic view is now used when
needed...instead of the Carbon version.
The order of UI preference is Cocoa, Carbon, Generic,
unless force to Generic view user setting.
They now support realtime preview.
They also support dialog resizing as I found many that
scaled nicely (mostly Apple's).
Uses the new Effect format so now supports user and
factory presets.
NOTE: Be VERY critical when testing this as I've
never written Objective-C or Cocoa code
before!
I've added some of the new plugin stuff to LV2, Nyquist, and
Vamp so that they play better in the new system. They no
longer get bunched in with the Audacity effects when sorting
or grouping the menus. They have not been fully converted
but they should be good for 2.1.0.
Nyquist plugins now include ";author" and ";copyright"
statements.
Added the 4 new Nyquist plugins to the Windows build.
Audiounits are still coming...had to push them to the back
burner to get this other stuff out of the way.
Scanning for new plugins has been improved so that newly
discovered ones will be shown to the user when Audacity starts.
Effects menu sorting has been fixed and improved.
Disabling effect types in Preferences works again and you
no longer have to restart Audacity for them the change to work.
Effect usage in chains works again.
Plugin registration dialog code simplified a bit.
Group names in the pluginregistry are now base64 encoded. I
never really thought about it, but wxFileConfig group names
are case insensitive and since I was using the group name as
the plugin ID, I ran into a conflict on Linux where there
were two plugins with the same name, just different case. (And
they were different plugins.) Hoping all of this will change
when/if the config file gets converted to XML. (wx3 if finally
including XML support)
A fair amount of cleanup of this new code has been done and
will continue as more stuff is converted.
The big thing is the common efffects UI. Right now Ladspa and VST
have been converted to use it and Audiounits will be next. It makes
everything nice and consistent while reducing the clutter in the
dialog.
Other goodies are:
Ladspa effects now show output controls when supplied by the effect
Ladspa effects now work fine as Analyze type effects
Ladspa now has user presets
VST effects dialog is now less cluttered...leaving more room for the effect
Ladspa and VST effects now share a common UI
Ladspa and VST effects are now usable in chains
Ladspa and VST effects now handle user presets the same way
Currently active effects settings automatically saved and reloaded
Can now do numeric range checking on input fields.
And, as always, plenty of critter squashing.
Main effect host processing extended to support generate
effects and sync locked tracks.
Ladspa updated to utilize new generate support.
I'll address Analyze plugins when I get to the SBSMS ones.
Shared and private config changes are flushed immediately.
Cancel button restored to VST and Ladspa dialogs. This
also restores the ESC button functionality.
Current parameters saved with Apply or Ok clicked...not
when Audacity ends.
Ladspa and VST effects with that reports no input and
no outputs are now ignored.
Ladspa effects providing a latency value is now handled.
Ladspa generator effects now use the TimeTextCtrl for
specifying duration.
This also (hopefully) corrects some additional problems in general
realtime support. Particular focus should be given to the handling
of various combinations of stereo, left channel mono, right channel
mono, and true mono as this has been a particularly troublesome
area.
Current options:
Publisher: name (the closest to what we have now)
Name (doesn't include the publisher, just a straigt up alpha sort
Publisher (creates submenus based on the publisher)
Type (creates submenus based on the type, VST, Nyquist, etc.)
And the Linux method of creating submenus based on number of items
is available to all and you can choose how menu you want per submenu.
I had to bring this back since I'd removed it when for the new effects
and I figured why limit it to only Linux...
Check it out in Preferences (effect page).
You'll also notice that the effects page is starting to talk about
plugins. That will progress further (baby steps) so bare with me
for just a bit more.
This gets meter type VST effects working again by extending the
The master now maintains his own internal buffers and sums (mixes) all
playing tracks into those buffers. The buffers are then fed into the
VST effect that is presented to the user. This allows the effect to
provide feedback to the user if it support it. Such effects may display
meters or clipping indicators.
Several issues with treading have also been corrected (hopefully ;-)).
These showed up mostly on Linux, but could have happened on the others
as well.
The realtime support is no longer limited to 2 channels per logical
track. Once support for more channels is added, this should be ready
for it.
The rack dialog can now be toggled via the edit toolbar button. It
doesn't stay pressed because the closing of the dialog would have to
be communicated back to the toolbar.
As the rack is updated with new or removed effects or active state
changed, all effects in the active list were shutdown and all effects
in the updated list were initialized. This now shuts down only the
effects no longer in the list and initializes only new ones.
The rack now uses wxBitmapButton instead of Audacity's AButton. The
AButton has a timing issue that prevents it from being deleted while
processing the click event. I looked into it, but gave up and switched
to the wxBitmapButton. Unfortunately, there's a problem with the
wxBitmapButton as well...at least on my setup here. Either the bitmaps
are being scaled or antialiased. Will have to get feedback on this.
I finally figured out why some VSTs didn't seem to do anything in
realtime, at least in my case anyway. I've installed a lot of demo
VSTs and while they work in "batch/offline" mode, some of them will
not work in realtime since vendors tend to remove automation as one
of the demo limitations.
More changes coming shortly...
This changes the realtime preview from using 1 effect for all tracks
to an effect per track (logical track). This should clear up the
bad audio when more than one track (or a stereo track) is present.
An unfortunate side effect is that meter effects no longer work since
the one presented to the user is not the one doing the actual work.
Suggestions on how to remedy this are welcome.
I've made it where you can enable and disable via experimentals:
EXPERIMENTAL_REALTIME_EFFECTS
EXPERIMENTAL_EFFECTS_RACK
You will notice that, as of now, the only effects currently set up for
realtime are VSTs. Now that this is in, I will start converting the
rest.
As I start to convert the effects, the astute of you may notice that
they no longer directly access tracks or any "internal" Audacity
objects. This isolates the effects from changes in Audacity and makes
it much easier to add new ones.
Anyway, all 3 platforms can now display VST effects in graphical mode.
Yes, that means Linux too. There are quite a few VSTs for Linux if
you search for them.
The so-called "rack" definitely needs some discussion, work, and attention
from someone much better at graphics than me. I'm not really sure it should
stay in as-is. I'd originally planned for it to be simply a utility window
where you can store your (preconfigured) favorite effects. It should probably
revert back to that idea.
You may notice that this DOES include the API work I did. The realtime effects
were too tied to it and I didn't want to redo the whole thing. As I mentioned
elsewhere, the API stuff may or may not be very future proof.
So, let the critter complaints commence. I absolute KNOW there will be some.
(I know I'll be hearing from the Linux peeps pretty darn quickly. ;-))
This relies on three new nyquist scripts to actually do the editing. The peak-snapping code in FrequencyWindow has been extracted into a new class, SpectrumAnalyst, to provide peak-snapping in spectrogram too.
Steve found that if you preview an effect and, say, cancel it
before it finishes preparing, an apply will not modify all of
the originally selected audio...just up to the preview length.
This is very easy to reproduce using the Paulstretch on a 30
second clip...just click stop on the "Preparing preview"
dialog and the click apply.
This change is believed to be a direct refactoring that does not change functionality. It paves the way for more complex kinds of selection, such as selections involving frequency as well as time. It also reduces risk of left and right edges being swapped in future code using SelectedRegion, as the default is to swap on assignment if needed.
