Leland Lucius
0bf5f77dd6
Fix a couple of 10.6 SDK / clang / wxWidgets 2.8.12 issues.
2015-05-15 12:30:09 -05:00
Steve Daulton
fbaab8702e
Small optimization - non-linear preview copies only selected tracks by default.
2015-05-15 16:57:29 +01:00
Steve Daulton
d9f3c432d4
Fix for bugs 943, 942, 941, 843 and 775.
...
Non-linear effects now process tracks before mixing.
This will be slower when multiple tracks are selected
but the preview should now match the applied effect.
SetLinearEffectFlag(true) allows linear effects to
preview more quickly when multiple tracks selected, by
pre-mixing selected tracks.
Simple generators like Tone and Noise may be marked as
'linear' so that they only preview a few seconds.
Generators that vary over time (such as Chirp) must use
the full duration that is set. As this currently
requires calculating the full duration, preview for
'non-linear' generators are not limited to the preview
length.
2015-05-15 12:51:51 +01:00
James Crook
c85bf1c531
StereoToMono now EffectTypeHidden
...
This way it does not appear in the list of effects available to choose.
2015-05-14 22:15:44 +01:00
James Crook
4613be94f1
Re-enabled EXPERIMENTAL_SCIENCE_FILTER
...
It's available now, but you have to choose to add it.
2015-05-14 16:13:10 +01:00
James Crook
8ae6fc42e1
Added 'More...' to Generate and Analyze menus
2015-05-14 16:11:46 +01:00
Steve Daulton
5fd751169f
Update Amplify.cpp
...
Fix for a rounding bug that causes the OK button to be sometimes greyed out. The bug may be Linux only (not tested on other platforms) but should not adversely affect other OS's.
2015-05-13 13:26:15 +01:00
Leland Lucius
e4043f6518
Fix for bug #934
2015-05-13 00:47:45 -05:00
Leland Lucius
409cb45362
Make sure selection times are initialized
...
This should fix the initial duration issue when adding
generators to chains.
2015-05-12 23:19:56 -05:00
Leland Lucius
186cdb1248
Make sure "default" builtin effects are always registered
...
This appears to be a little overboard, but it makes the
registration of defaults a little more generic.
2015-05-12 10:41:22 -05:00
Leland Lucius
07f965a057
Make sure the effect ID is valid (non-blank)
2015-05-12 10:40:28 -05:00
Leland Lucius
3391203e93
Make sure buttons are disabled for "special" commands
2015-05-12 10:26:27 -05:00
David Bailes
3000594d2f
Improving accessibility of dialog for entering the name of a new chain. Jaws does not read the text in the dialog by default, and the accessibility names of the controls in the dialog cannot be set, so the best that can be done is to have a meaningful title for the dialog, and set the accessibility name of the dialog so that nvda can read it.
2015-05-12 09:29:55 +01:00
Leland Lucius
ff0cd7c347
Try fixing bug #927 again...last attempt was brain damaged.
2015-05-11 14:04:02 -05:00
Leland Lucius
0c9111608d
Fix for bug #927
...
At least I'm pretty sure this addresses all of the example Peter
mentions.
2015-05-11 10:51:53 -05:00
James Crook
4fb56d0aa1
Fix missing include <wx/radiobut.h>
2015-05-11 13:54:02 +01:00
James Crook
e2bfb1bae6
Merge pull request #41 from DavidBailes/pluginmanager
...
minor improvements to accessibility of register effects dialog. Added…
2015-05-11 13:22:40 +01:00
David Bailes
514167d8ce
minor improvements to accessibility of register effects dialog. Added show to the accessibility names of the radio buttons. Added access keys for the radio buttons, plus adjusted others.
2015-05-11 12:22:02 +01:00
James Crook
16fe9af314
Bug 938 - Audio longer than 2^31 sample is visually corrupted.
...
Seems to have been an overflow in GetWaveDisplay().
2015-05-10 20:17:30 +01:00
James Crook
ccc71c31b6
Some effect descriptions (for Doxygen).
2015-05-09 17:36:54 +01:00
James Crook
cb70fd3abd
Added filter on Effect registration dialog.
...
This adds radio buttons to view all effects, just unregistered effects (effects that are not yet in the menus) or just registered effects (effects that are in the menus. It remembers ticks and unticks until the dialog is closed, so changes to ticks for effects that are not shown by the current filter will still have an effect. It does this by switching back to show-all just before closing the dialog.
2015-05-09 17:10:02 +01:00
James Crook
26a6242064
Merge remote-tracking branch 'dave/searchboxname'
2015-05-08 22:07:14 +01:00
James Crook
bc5082c976
More... now can removes effects too.
...
The effects shown ticked in the more.. list are the ones currently enabled for the menus. We can add and remove from that list
2015-05-08 22:04:34 +01:00
James Crook
4b2a2f710a
Stub NyquistEffect::RedirectOutput() so mod_nyq_bench compiles
...
This function had somehow gone missing in other changes. mod_nyq_bench now compiles loads and runs again. Not tested beyond that.
2015-05-08 16:27:32 +01:00
James Crook
5bc41dec0f
Compiler configuration names for mod_script_pipe project corrected.
...
These were debug wx284 and module_release. Needed just debug and release for these to actually work.
2015-05-08 16:25:00 +01:00
James Crook
1ef540c0e2
Now on version 2.1.1
2015-05-08 11:10:51 +01:00
David Bailes
394026c36e
In keyboard prefs set the accessibility name of mFilter to be the same as its label. The name is then the same as the one given in the manual, and the same if as user is using both a screen reader and magnifier.
2015-05-08 09:47:46 +01:00
James Crook
80529c6697
Merge remote-tracking branch 'dave/amplify2'
2015-05-07 15:32:53 +01:00
Steve Daulton
e9b2d0f02d
A couple of bug fixes for Quick-Play and simplify defaults
2015-05-07 14:34:40 +01:00
David Bailes
a48f299b31
forgot to remove temp varialbe in OnPeakText
2015-05-07 10:56:40 +01:00
David Bailes
5a25efde02
changes to ensure that when clipping is unchecked, then both on opening, and setting peak to 0, preview and ok are available
2015-05-07 10:16:52 +01:00
Steve Daulton
c487b920ca
Improve selection handling in Quick-Play
2015-05-05 13:00:18 +01:00
Steve Daulton
1ad878771f
Update a couple of variable names.
2015-05-05 13:00:18 +01:00
Leland Lucius
35c2e5d227
Set focus to algorithm choice on initial display
2015-05-04 23:39:53 -05:00
Leland Lucius
f0cd43236d
Select generated audio on success
2015-05-04 20:52:25 -05:00
Leland Lucius
c009157290
Use fabs() instead of abs()
2015-05-04 17:50:44 -05:00
Leland Lucius
303faaa15b
Replace convolve with previous version
2015-05-04 12:42:27 -05:00
Leland Lucius
f804e5049e
Hyphenate all 8, 16, 24, 32 and 64 bit strings
2015-05-04 12:32:47 -05:00
Leland Lucius
848ec5a9b9
Disable Apply button while the effect is running
2015-05-04 12:15:54 -05:00
Leland Lucius
5ddbe112af
Remove access key from "More" to prevent accidental selection
2015-05-04 12:14:55 -05:00
Steve Daulton
1abdbc7f51
Update ToneGen.cpp
...
Fix typo in GUI
2015-05-04 17:59:18 +01:00
Leland Lucius
01aaaebf77
No longer yield when the progress dialog is active
...
When the dialog yielded, it opened up a window that allowed events
to flow to other parts of the app that shouldn't be receiving them
while the action is in progress. This could cause odd behavior
or crashes.
I've removed the yields and hopefully the darn thing will still
work right.
2015-05-04 11:09:30 -05:00
Leland Lucius
bda5653d19
Bringing back the close/cancel button
...
But, it's at least in the right location now for modal effect dialogs
which might me it more agreeable.
2015-05-04 11:06:27 -05:00
Leland Lucius
4d06c4e6c0
Merge pull request #40 from lllucius/FreqWindow
...
Freq window
2015-05-04 06:58:52 -05:00
Leland Lucius
b8fe0e6743
Fix escape issue causing SAL to fail
...
And don't uppercase the line...DOH!
2015-05-04 03:12:55 -05:00
Leland Lucius
287c649f4f
Correct "float" entry to read "32 bit float" instead
2015-05-04 02:37:41 -05:00
Leland Lucius
74f6c0d802
Append selected extension to filenames for bug #387 on Linux.
2015-05-04 02:25:37 -05:00
Leland Lucius
e18175142a
A (slightly) better way of going adding the extension on OSX.
2015-05-04 01:34:27 -05:00
Leland Lucius
d4363ecb5b
Append selected extension to filenames for bug #387 on OSX.
2015-05-04 01:07:37 -05:00
Leland Lucius
a107b04d5c
Fix for bug #472
...
Ed's fix for bug #179 is now fine for all platforms since
duplicates are removed by the new plugin support.
2015-05-04 00:04:07 -05:00
