mirror of
https://github.com/abperiasamy/rtl8812AU_8821AU_linux.git
synced 2025-10-19 17:11:09 +02:00
merge new version v4.3.14 from https://github.com/ptpt52/rtl8812au (#160)
This commit is contained in:
Chen Minqiang
committed by
Harshavardhana
Harshavardhana
parent
c962f7a88d
commit
00aedbde5c
@@ -1,7 +1,7 @@
|
||||
/******************************************************************************
|
||||
*
|
||||
* Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
|
||||
*
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify it
|
||||
* under the terms of version 2 of the GNU General Public License as
|
||||
* published by the Free Software Foundation.
|
||||
@@ -20,6 +20,19 @@
|
||||
#ifndef _RTW_VHT_H_
|
||||
#define _RTW_VHT_H_
|
||||
|
||||
#define LDPC_VHT_ENABLE_RX BIT0
|
||||
#define LDPC_VHT_ENABLE_TX BIT1
|
||||
#define LDPC_VHT_TEST_TX_ENABLE BIT2
|
||||
#define LDPC_VHT_CAP_TX BIT3
|
||||
|
||||
#define STBC_VHT_ENABLE_RX BIT0
|
||||
#define STBC_VHT_ENABLE_TX BIT1
|
||||
#define STBC_VHT_TEST_TX_ENABLE BIT2
|
||||
#define STBC_VHT_CAP_TX BIT3
|
||||
|
||||
#define BEAMFORMING_VHT_BEAMFORMER_ENABLE BIT0 // Declare our NIC supports beamformer
|
||||
#define BEAMFORMING_VHT_BEAMFORMEE_ENABLE BIT1 // Declare our NIC supports beamformee
|
||||
#define BEAMFORMING_VHT_BEAMFORMER_TEST BIT2 // Transmiting Beamforming no matter the target supports it or not
|
||||
|
||||
//VHT capability info
|
||||
#define SET_VHT_CAPABILITY_ELE_MAX_MPDU_LENGTH(_pEleStart, _val) SET_BITS_TO_LE_1BYTE(_pEleStart, 0, 2, _val)
|
||||
@@ -39,10 +52,10 @@
|
||||
#define SET_VHT_CAPABILITY_ELE_HTC_VHT(_pEleStart, _val) SET_BITS_TO_LE_1BYTE((_pEleStart)+2, 6, 1, _val)
|
||||
#define SET_VHT_CAPABILITY_ELE_MAX_RXAMPDU_FACTOR(_pEleStart, _val) SET_BITS_TO_LE_2BYTE((_pEleStart)+2, 7, 3, _val) //B23~B25
|
||||
#define SET_VHT_CAPABILITY_ELE_LINK_ADAPTION(_pEleStart, _val) SET_BITS_TO_LE_1BYTE((_pEleStart)+2, 2, 2, _val)
|
||||
#define SET_VHT_CAPABILITY_ELE_MCS_RX_MAP(_pEleStart, _val) SET_BITS_TO_LE_2BYTE((_pEleStart)+4, 0, 16, _val) //B0~B15 indicate Rx MCS MAP, we write 0 to indicate MCS0~7. by page
|
||||
#define SET_VHT_CAPABILITY_ELE_MCS_RX_HIGHEST_RATE(_pEleStart, _val) SET_BITS_TO_LE_2BYTE((_pEleStart)+6, 0, 13, _val)
|
||||
#define SET_VHT_CAPABILITY_ELE_MCS_TX_MAP(_pEleStart, _val) SET_BITS_TO_LE_2BYTE((_pEleStart)+8, 0, 16, _val) //B0~B15 indicate Tx MCS MAP, we write 0 to indicate MCS0~7. by page
|
||||
#define SET_VHT_CAPABILITY_ELE_MCS_TX_HIGHEST_RATE(_pEleStart, _val) SET_BITS_TO_LE_2BYTE((_pEleStart)+10, 0, 13, _val)
|
||||
#define SET_VHT_CAPABILITY_ELE_MCS_RX_MAP(_pEleStart, _val) SET_BITS_TO_LE_2BYTE_16BIT((_pEleStart)+4, 0, 16, _val) //B0~B15 indicate Rx MCS MAP, we write 0 to indicate MCS0~7. by page
|
||||
#define SET_VHT_CAPABILITY_ELE_MCS_RX_HIGHEST_RATE(_pEleStart, _val) SET_BITS_TO_LE_2BYTE((_pEleStart)+6, 0, 13, _val)
|
||||
#define SET_VHT_CAPABILITY_ELE_MCS_TX_MAP(_pEleStart, _val) SET_BITS_TO_LE_2BYTE_16BIT((_pEleStart)+8, 0, 16, _val) //B0~B15 indicate Tx MCS MAP, we write 0 to indicate MCS0~7. by page
|
||||
#define SET_VHT_CAPABILITY_ELE_MCS_TX_HIGHEST_RATE(_pEleStart, _val) SET_BITS_TO_LE_2BYTE((_pEleStart)+10, 0, 13, _val)
|
||||
|
||||
|
||||
#define GET_VHT_CAPABILITY_ELE_MAX_MPDU_LENGTH(_pEleStart) LE_BITS_TO_1BYTE(_pEleStart, 0, 2)
|
||||
@@ -57,22 +70,22 @@
|
||||
#define GET_VHT_CAPABILITY_ELE_TXOP_PS(_pEleStart) LE_BITS_TO_1BYTE((_pEleStart)+2, 5, 1)
|
||||
#define GET_VHT_CAPABILITY_ELE_MAX_RXAMPDU_FACTOR(_pEleStart) LE_BITS_TO_2BYTE((_pEleStart)+2, 7, 3)
|
||||
#define GET_VHT_CAPABILITY_ELE_RX_MCS(_pEleStart) ((_pEleStart)+4)
|
||||
#define GET_VHT_CAPABILITY_ELE_MCS_RX_HIGHEST_RATE(_pEleStart) LE_BITS_TO_2BYTE((_pEleStart)+6, 0, 13)
|
||||
#define GET_VHT_CAPABILITY_ELE_MCS_RX_HIGHEST_RATE(_pEleStart) LE_BITS_TO_2BYTE((_pEleStart)+6, 0, 13)
|
||||
#define GET_VHT_CAPABILITY_ELE_TX_MCS(_pEleStart) ((_pEleStart)+8)
|
||||
#define GET_VHT_CAPABILITY_ELE_MCS_TX_HIGHEST_RATE(_pEleStart) LE_BITS_TO_2BYTE((_pEleStart)+10, 0, 13)
|
||||
#define GET_VHT_CAPABILITY_ELE_MCS_TX_HIGHEST_RATE(_pEleStart) LE_BITS_TO_2BYTE((_pEleStart)+10, 0, 13)
|
||||
|
||||
|
||||
//VHT Operation Information Element
|
||||
#define SET_VHT_OPERATION_ELE_CHL_WIDTH(_pEleStart, _val) SET_BITS_TO_LE_1BYTE(_pEleStart, 0, 8, _val)
|
||||
#define SET_VHT_OPERATION_ELE_CHL_CENTER_FREQ1(_pEleStart, _val) SET_BITS_TO_LE_2BYTE(_pEleStart+1, 0, 8, _val)
|
||||
#define SET_VHT_OPERATION_ELE_CHL_CENTER_FREQ2(_pEleStart, _val) SET_BITS_TO_LE_2BYTE(_pEleStart+2, 0, 8, _val)
|
||||
#define SET_VHT_OPERATION_ELE_BASIC_MCS_SET(_pEleStart, _val) SET_BITS_TO_LE_2BYTE(_pEleStart+3, 0, 16, _val)
|
||||
#define SET_VHT_OPERATION_ELE_CHL_WIDTH(_pEleStart, _val) SET_BITS_TO_LE_1BYTE_8BIT(_pEleStart, 0, 8, _val)
|
||||
#define SET_VHT_OPERATION_ELE_CHL_CENTER_FREQ1(_pEleStart, _val) SET_BITS_TO_LE_1BYTE_8BIT(_pEleStart+1, 0, 8, _val)
|
||||
#define SET_VHT_OPERATION_ELE_CHL_CENTER_FREQ2(_pEleStart, _val) SET_BITS_TO_LE_1BYTE_8BIT(_pEleStart+2, 0, 8, _val)
|
||||
#define SET_VHT_OPERATION_ELE_BASIC_MCS_SET(_pEleStart, _val) SET_BITS_TO_LE_2BYTE_16BIT((_pEleStart)+3, 0, 16, _val)
|
||||
|
||||
#define GET_VHT_OPERATION_ELE_CHL_WIDTH(_pEleStart) LE_BITS_TO_1BYTE(_pEleStart,0,8)
|
||||
#define GET_VHT_OPERATION_ELE_CENTER_FREQ1(_pEleStart) LE_BITS_TO_1BYTE((_pEleStart)+1,0,8)
|
||||
#define GET_VHT_OPERATION_ELE_CENTER_FREQ2(_pEleStart) LE_BITS_TO_1BYTE((_pEleStart)+2,0,8)
|
||||
|
||||
//VHT Operating Mode
|
||||
//VHT Operating Mode
|
||||
#define SET_VHT_OPERATING_MODE_FIELD_CHNL_WIDTH(_pEleStart, _val) SET_BITS_TO_LE_1BYTE(_pEleStart, 0, 2, _val)
|
||||
#define SET_VHT_OPERATING_MODE_FIELD_RX_NSS(_pEleStart, _val) SET_BITS_TO_LE_1BYTE(_pEleStart, 4, 3, _val)
|
||||
#define SET_VHT_OPERATING_MODE_FIELD_RX_NSS_TYPE(_pEleStart, _val) SET_BITS_TO_LE_1BYTE(_pEleStart, 7, 1, _val)
|
||||
@@ -83,42 +96,36 @@
|
||||
#define SET_EXT_CAPABILITY_ELE_OP_MODE_NOTIF(_pEleStart, _val) SET_BITS_TO_LE_1BYTE((_pEleStart)+7, 6, 1, _val)
|
||||
#define GET_EXT_CAPABILITY_ELE_OP_MODE_NOTIF(_pEleStart) LE_BITS_TO_1BYTE((_pEleStart)+7, 6, 1)
|
||||
|
||||
|
||||
#define TEST_FLAG(__Flag,__testFlag) (((__Flag) & (__testFlag)) != 0)
|
||||
#define SET_FLAG(__Flag, __setFlag) ((__Flag) |= __setFlag)
|
||||
#define CLEAR_FLAG(__Flag, __clearFlag) ((__Flag) &= ~(__clearFlag))
|
||||
#define CLEAR_FLAGS(__Flag) ((__Flag) = 0)
|
||||
#define TEST_FLAGS(__Flag, __testFlags) (((__Flag) & (__testFlags)) == (__testFlags))
|
||||
|
||||
struct vht_priv
|
||||
{
|
||||
struct vht_priv {
|
||||
u8 vht_option;
|
||||
|
||||
u8 ldpc_cap;
|
||||
u8 stbc_cap;
|
||||
u8 beamform_cap;
|
||||
|
||||
u8 bwmode;
|
||||
u8 sgi;//short GI
|
||||
u8 sgi_80m;//short GI
|
||||
u8 ampdu_len;
|
||||
|
||||
u8 vht_op_mode_notify;
|
||||
u8 vht_highest_rate;
|
||||
u8 vht_mcs_map[2];
|
||||
|
||||
u8 vht_cap[32];
|
||||
};
|
||||
|
||||
u8 rtw_get_vht_highest_rate(_adapter *padapter, u8 *pvht_mcs_map);
|
||||
u16 rtw_vht_data_rate(u8 bw, u8 short_GI, u8 vht_mcs_rate);
|
||||
u8 rtw_get_vht_highest_rate(u8 *pvht_mcs_map);
|
||||
void rtw_get_vht_nss(u8 *pvht_mcs_map);
|
||||
u16 rtw_vht_mcs_to_data_rate(u8 bw, u8 short_GI, u8 vht_mcs_rate);
|
||||
u32 rtw_vht_rate_to_bitmap(u8 *pVHTRate);
|
||||
void rtw_vht_use_default_setting(_adapter *padapter);
|
||||
u32 rtw_build_vht_operation_ie(_adapter *padapter, u8 *pbuf, u8 channel);
|
||||
u32 rtw_build_vht_op_mode_notify_ie(_adapter *padapter, u8 *pbuf);
|
||||
u32 rtw_build_vht_op_mode_notify_ie(_adapter *padapter, u8 *pbuf, u8 bw);
|
||||
u32 rtw_build_vht_cap_ie(_adapter *padapter, u8 *pbuf);
|
||||
void update_sta_vht_info_apmode(_adapter *padapter, PVOID psta);
|
||||
void update_hw_vht_param(_adapter *padapter);
|
||||
void VHT_caps_handler(_adapter *padapter, PNDIS_802_11_VARIABLE_IEs pIE);
|
||||
void VHT_operation_handler(_adapter *padapter, PNDIS_802_11_VARIABLE_IEs pIE);
|
||||
void rtw_process_vht_op_mode_notify(_adapter *padapter, u8 *pframe, PVOID sta);
|
||||
u32 rtw_restructure_vht_ie(_adapter *padapter, u8 *in_ie, u8 *out_ie, uint in_len, uint *pout_len);
|
||||
void VHTOnAssocRsp(_adapter *padapter);
|
||||
|
||||
|
||||
Reference in New Issue
Block a user