mirror of
https://github.com/abperiasamy/rtl8812AU_8821AU_linux.git
synced 2025-10-19 09:01:10 +02:00
merge new version v4.3.14 from https://github.com/ptpt52/rtl8812au (#160)
This commit is contained in:
Chen Minqiang
committed by
Harshavardhana
Harshavardhana
parent
c962f7a88d
commit
00aedbde5c
@@ -1,7 +1,7 @@
|
||||
/******************************************************************************
|
||||
*
|
||||
* Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
|
||||
*
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify it
|
||||
* under the terms of version 2 of the GNU General Public License as
|
||||
* published by the Free Software Foundation.
|
||||
@@ -30,8 +30,10 @@
|
||||
// Increase the scanning timeout because of increasing the SURVEY_TO value.
|
||||
|
||||
#define SCANNING_TIMEOUT 8000
|
||||
|
||||
#define SCAN_INTERVAL (30) // unit:2sec, 30*2=60sec
|
||||
#ifdef CONFIG_STA_MODE_SCAN_UNDER_AP_MODE
|
||||
#define CONC_SCANNING_TIMEOUT_SINGLE_BAND 10000
|
||||
#define CONC_SCANNING_TIMEOUT_DUAL_BAND 15000
|
||||
#endif //CONFIG_STA_MODE_SCAN_UNDER_AP_MODE
|
||||
|
||||
#ifdef PALTFORM_OS_WINCE
|
||||
#define SCANQUEUE_LIFETIME 12000000 // unit:us
|
||||
@@ -62,6 +64,7 @@
|
||||
#define WIFI_AUTOCONF 0x00004000
|
||||
#define WIFI_AUTOCONF_IND 0x00008000
|
||||
#endif
|
||||
#define WIFI_MONITOR_STATE 0x80000000
|
||||
|
||||
/*
|
||||
// ========== P2P Section Start ===============
|
||||
@@ -87,40 +90,40 @@
|
||||
|
||||
|
||||
enum dot11AuthAlgrthmNum {
|
||||
dot11AuthAlgrthm_Open = 0,
|
||||
dot11AuthAlgrthm_Shared,
|
||||
dot11AuthAlgrthm_8021X,
|
||||
dot11AuthAlgrthm_Auto,
|
||||
dot11AuthAlgrthm_WAPI,
|
||||
dot11AuthAlgrthm_MaxNum
|
||||
dot11AuthAlgrthm_Open = 0,
|
||||
dot11AuthAlgrthm_Shared,
|
||||
dot11AuthAlgrthm_8021X,
|
||||
dot11AuthAlgrthm_Auto,
|
||||
dot11AuthAlgrthm_WAPI,
|
||||
dot11AuthAlgrthm_MaxNum
|
||||
};
|
||||
|
||||
// Scan type including active and passive scan.
|
||||
typedef enum _RT_SCAN_TYPE
|
||||
{
|
||||
typedef enum _RT_SCAN_TYPE {
|
||||
SCAN_PASSIVE,
|
||||
SCAN_ACTIVE,
|
||||
SCAN_MIX,
|
||||
}RT_SCAN_TYPE, *PRT_SCAN_TYPE;
|
||||
} RT_SCAN_TYPE, *PRT_SCAN_TYPE;
|
||||
|
||||
enum _BAND
|
||||
{
|
||||
enum _BAND {
|
||||
GHZ24_50 = 0,
|
||||
GHZ_50,
|
||||
GHZ_24,
|
||||
GHZ_MAX,
|
||||
};
|
||||
|
||||
#define rtw_band_valid(band) ((band) >= GHZ24_50 && (band) < GHZ_MAX)
|
||||
|
||||
enum DriverInterface {
|
||||
DRIVER_WEXT = 1,
|
||||
DRIVER_CFG80211 = 2
|
||||
};
|
||||
|
||||
enum SCAN_RESULT_TYPE
|
||||
{
|
||||
enum SCAN_RESULT_TYPE {
|
||||
SCAN_RESULT_P2P_ONLY = 0, // Will return all the P2P devices.
|
||||
SCAN_RESULT_ALL = 1, // Will return all the scanned device, include AP.
|
||||
SCAN_RESULT_WFD_TYPE = 2 // Will just return the correct WFD device.
|
||||
// If this device is Miracast sink device, it will just return all the Miracast source devices.
|
||||
// If this device is Miracast sink device, it will just return all the Miracast source devices.
|
||||
};
|
||||
|
||||
/*
|
||||
@@ -149,7 +152,7 @@ struct sitesurvey_ctrl {
|
||||
_timer sitesurvey_ctrl_timer;
|
||||
};
|
||||
|
||||
typedef struct _RT_LINK_DETECT_T{
|
||||
typedef struct _RT_LINK_DETECT_T {
|
||||
u32 NumTxOkInPeriod;
|
||||
u32 NumRxOkInPeriod;
|
||||
u32 NumRxUnicastOkInPeriod;
|
||||
@@ -159,7 +162,10 @@ typedef struct _RT_LINK_DETECT_T{
|
||||
BOOLEAN bHigherBusyTraffic; // For interrupt migration purpose.
|
||||
BOOLEAN bHigherBusyRxTraffic; // We may disable Tx interrupt according as Rx traffic.
|
||||
BOOLEAN bHigherBusyTxTraffic; // We may disable Tx interrupt according as Tx traffic.
|
||||
}RT_LINK_DETECT_T, *PRT_LINK_DETECT_T;
|
||||
//u8 TrafficBusyState;
|
||||
u8 TrafficTransitionCount;
|
||||
u32 LowPowerTransitionCount;
|
||||
} RT_LINK_DETECT_T, *PRT_LINK_DETECT_T;
|
||||
|
||||
struct profile_info {
|
||||
u8 ssidlen;
|
||||
@@ -167,7 +173,7 @@ struct profile_info {
|
||||
u8 peermac[ ETH_ALEN ];
|
||||
};
|
||||
|
||||
struct tx_invite_req_info{
|
||||
struct tx_invite_req_info {
|
||||
u8 token;
|
||||
u8 benable;
|
||||
u8 go_ssid[ WLAN_SSID_MAXLEN ];
|
||||
@@ -179,36 +185,36 @@ struct tx_invite_req_info{
|
||||
|
||||
};
|
||||
|
||||
struct tx_invite_resp_info{
|
||||
struct tx_invite_resp_info {
|
||||
u8 token; // Used to record the dialog token of p2p invitation request frame.
|
||||
};
|
||||
|
||||
#ifdef CONFIG_WFD
|
||||
|
||||
struct wifi_display_info{
|
||||
struct wifi_display_info {
|
||||
u16 wfd_enable; // Eanble/Disable the WFD function.
|
||||
u16 rtsp_ctrlport; // TCP port number at which the this WFD device listens for RTSP messages
|
||||
u16 peer_rtsp_ctrlport; // TCP port number at which the peer WFD device listens for RTSP messages
|
||||
// This filed should be filled when receiving the gropu negotiation request
|
||||
// This filed should be filled when receiving the gropu negotiation request
|
||||
|
||||
u8 peer_session_avail; // WFD session is available or not for the peer wfd device.
|
||||
// This variable will be set when sending the provisioning discovery request to peer WFD device.
|
||||
// And this variable will be reset when it is read by using the iwpriv p2p_get wfd_sa command.
|
||||
// This variable will be set when sending the provisioning discovery request to peer WFD device.
|
||||
// And this variable will be reset when it is read by using the iwpriv p2p_get wfd_sa command.
|
||||
u8 ip_address[4];
|
||||
u8 peer_ip_address[4];
|
||||
u8 wfd_pc; // WFD preferred connection
|
||||
// 0 -> Prefer to use the P2P for WFD connection on peer side.
|
||||
// 1 -> Prefer to use the TDLS for WFD connection on peer side.
|
||||
|
||||
// 0 -> Prefer to use the P2P for WFD connection on peer side.
|
||||
// 1 -> Prefer to use the TDLS for WFD connection on peer side.
|
||||
|
||||
u8 wfd_device_type; // WFD Device Type
|
||||
// 0 -> WFD Source Device
|
||||
// 1 -> WFD Primary Sink Device
|
||||
// 0 -> WFD Source Device
|
||||
// 1 -> WFD Primary Sink Device
|
||||
enum SCAN_RESULT_TYPE scan_result_type; // Used when P2P is enable. This parameter will impact the scan result.
|
||||
|
||||
};
|
||||
#endif //CONFIG_WFD
|
||||
|
||||
struct tx_provdisc_req_info{
|
||||
struct tx_provdisc_req_info {
|
||||
u16 wps_config_method_request; // Used when sending the provisioning request frame
|
||||
u16 peer_channel_num[2]; // The channel number which the receiver stands.
|
||||
NDIS_802_11_SSID ssid;
|
||||
@@ -217,44 +223,70 @@ struct tx_provdisc_req_info{
|
||||
u8 benable; // This provision discovery request frame is trigger to send or not
|
||||
};
|
||||
|
||||
struct rx_provdisc_req_info{ //When peer device issue prov_disc_req first, we should store the following informations
|
||||
struct rx_provdisc_req_info { //When peer device issue prov_disc_req first, we should store the following informations
|
||||
u8 peerDevAddr[ ETH_ALEN ]; // Peer device address
|
||||
u8 strconfig_method_desc_of_prov_disc_req[4]; // description for the config method located in the provisioning discovery request frame.
|
||||
// The UI must know this information to know which config method the remote p2p device is requiring.
|
||||
u8 strconfig_method_desc_of_prov_disc_req[4]; // description for the config method located in the provisioning discovery request frame.
|
||||
// The UI must know this information to know which config method the remote p2p device is requiring.
|
||||
};
|
||||
|
||||
struct tx_nego_req_info{
|
||||
struct tx_nego_req_info {
|
||||
u16 peer_channel_num[2]; // The channel number which the receiver stands.
|
||||
u8 peerDevAddr[ ETH_ALEN ]; // Peer device address
|
||||
u8 benable; // This negoitation request frame is trigger to send or not
|
||||
};
|
||||
|
||||
struct group_id_info{
|
||||
struct group_id_info {
|
||||
u8 go_device_addr[ ETH_ALEN ]; // The GO's device address of this P2P group
|
||||
u8 ssid[ WLAN_SSID_MAXLEN ]; // The SSID of this P2P group
|
||||
};
|
||||
|
||||
struct scan_limit_info{
|
||||
struct scan_limit_info {
|
||||
u8 scan_op_ch_only; // When this flag is set, the driver should just scan the operation channel
|
||||
#ifndef CONFIG_P2P_OP_CHK_SOCIAL_CH
|
||||
u8 operation_ch[2]; // Store the operation channel of invitation request frame
|
||||
#else
|
||||
u8 operation_ch[5]; // Store additional channel 1,6,11 for Android 4.2 IOT & Nexus 4
|
||||
#endif //CONFIG_P2P_OP_CHK_SOCIAL_CH
|
||||
};
|
||||
|
||||
#ifdef CONFIG_IOCTL_CFG80211
|
||||
struct cfg80211_wifidirect_info{
|
||||
struct cfg80211_wifidirect_info {
|
||||
_timer remain_on_ch_timer;
|
||||
u8 restore_channel;
|
||||
struct ieee80211_channel remain_on_ch_channel;
|
||||
enum nl80211_channel_type remain_on_ch_type;
|
||||
u64 remain_on_ch_cookie;
|
||||
bool not_indic_ro_ch_exp;
|
||||
bool is_ro_ch;
|
||||
u32 last_ro_ch_time; /* this will be updated at the beginning and end of ro_ch */
|
||||
};
|
||||
#endif //CONFIG_IOCTL_CFG80211
|
||||
|
||||
struct wifidirect_info{
|
||||
#ifdef CONFIG_P2P_WOWLAN
|
||||
|
||||
enum P2P_WOWLAN_RECV_FRAME_TYPE {
|
||||
P2P_WOWLAN_RECV_NEGO_REQ = 0,
|
||||
P2P_WOWLAN_RECV_INVITE_REQ = 1,
|
||||
P2P_WOWLAN_RECV_PROVISION_REQ = 2,
|
||||
};
|
||||
|
||||
struct p2p_wowlan_info {
|
||||
|
||||
u8 is_trigger;
|
||||
enum P2P_WOWLAN_RECV_FRAME_TYPE wowlan_recv_frame_type;
|
||||
u8 wowlan_peer_addr[ETH_ALEN];
|
||||
u16 wowlan_peer_wpsconfig;
|
||||
u8 wowlan_peer_is_persistent;
|
||||
u8 wowlan_peer_invitation_type;
|
||||
};
|
||||
|
||||
#endif //CONFIG_P2P_WOWLAN
|
||||
|
||||
struct wifidirect_info {
|
||||
_adapter* padapter;
|
||||
_timer find_phase_timer;
|
||||
_timer restore_p2p_state_timer;
|
||||
|
||||
|
||||
// Used to do the scanning. After confirming the peer is availalble, the driver transmits the P2P frame to peer.
|
||||
_timer pre_tx_scan_timer;
|
||||
_timer reset_ch_sitesurvey;
|
||||
@@ -274,7 +306,12 @@ struct wifidirect_info{
|
||||
struct scan_limit_info p2p_info; // Used for get the limit scan channel from the P2P negotiation handshake
|
||||
#ifdef CONFIG_WFD
|
||||
struct wifi_display_info *wfd_info;
|
||||
#endif
|
||||
#endif
|
||||
|
||||
#ifdef CONFIG_P2P_WOWLAN
|
||||
struct p2p_wowlan_info p2p_wow_info;
|
||||
#endif //CONFIG_P2P_WOWLAN
|
||||
|
||||
enum P2P_ROLE role;
|
||||
enum P2P_STATE pre_p2p_state;
|
||||
enum P2P_STATE p2p_state;
|
||||
@@ -302,30 +339,32 @@ struct wifidirect_info{
|
||||
u8 p2p_group_ssid[WLAN_SSID_MAXLEN];
|
||||
u8 p2p_group_ssid_len;
|
||||
u8 persistent_supported; // Flag to know the persistent function should be supported or not.
|
||||
// In the Sigma test, the Sigma will provide this enable from the sta_set_p2p CAPI.
|
||||
// 0: disable
|
||||
// 1: enable
|
||||
// In the Sigma test, the Sigma will provide this enable from the sta_set_p2p CAPI.
|
||||
// 0: disable
|
||||
// 1: enable
|
||||
u8 session_available; // Flag to set the WFD session available to enable or disable "by Sigma"
|
||||
// In the Sigma test, the Sigma will disable the session available by using the sta_preset CAPI.
|
||||
// 0: disable
|
||||
// 1: enable
|
||||
// In the Sigma test, the Sigma will disable the session available by using the sta_preset CAPI.
|
||||
// 0: disable
|
||||
// 1: enable
|
||||
|
||||
u8 wfd_tdls_enable; // Flag to enable or disable the TDLS by WFD Sigma
|
||||
// 0: disable
|
||||
// 1: enable
|
||||
// 0: disable
|
||||
// 1: enable
|
||||
u8 wfd_tdls_weaksec; // Flag to enable or disable the weak security function for TDLS by WFD Sigma
|
||||
// 0: disable
|
||||
// In this case, the driver can't issue the tdsl setup request frame.
|
||||
// 1: enable
|
||||
// In this case, the driver can issue the tdls setup request frame
|
||||
// even the current security is weak security.
|
||||
// 0: disable
|
||||
// In this case, the driver can't issue the tdsl setup request frame.
|
||||
// 1: enable
|
||||
// In this case, the driver can issue the tdls setup request frame
|
||||
// even the current security is weak security.
|
||||
|
||||
enum P2P_WPSINFO ui_got_wps_info; // This field will store the WPS value (PIN value or PBC) that UI had got from the user.
|
||||
u16 supported_wps_cm; // This field describes the WPS config method which this driver supported.
|
||||
// The value should be the combination of config method defined in page104 of WPS v2.0 spec.
|
||||
// The value should be the combination of config method defined in page104 of WPS v2.0 spec.
|
||||
u8 external_uuid; // UUID flag
|
||||
u8 uuid[16]; // UUID
|
||||
uint channel_list_attr_len; // This field will contain the length of body of P2P Channel List attribute of group negotitation response frame.
|
||||
u8 channel_list_attr[100]; // This field will contain the body of P2P Channel List attribute of group negotitation response frame.
|
||||
// We will use the channel_cnt and channel_list fields when constructing the group negotitation confirm frame.
|
||||
// We will use the channel_cnt and channel_list fields when constructing the group negotitation confirm frame.
|
||||
u8 driver_interface; // Indicate DRIVER_WEXT or DRIVER_CFG80211
|
||||
|
||||
#ifdef CONFIG_CONCURRENT_MODE
|
||||
@@ -346,32 +385,83 @@ struct wifidirect_info{
|
||||
#endif // CONFIG_P2P_PS
|
||||
};
|
||||
|
||||
struct tdls_ss_record{ //signal strength record
|
||||
struct tdls_ss_record { //signal strength record
|
||||
u8 macaddr[ETH_ALEN];
|
||||
u8 RxPWDBAll;
|
||||
u8 is_tdls_sta; // _TRUE: direct link sta, _FALSE: else
|
||||
};
|
||||
|
||||
struct tdls_info{
|
||||
struct tdls_temp_mgmt {
|
||||
u8 initiator; // 0: None, 1: we initiate, 2: peer initiate
|
||||
u8 peer_addr[ETH_ALEN];
|
||||
};
|
||||
|
||||
#ifdef CONFIG_TDLS_CH_SW
|
||||
struct tdls_ch_switch {
|
||||
u32 ch_sw_state;
|
||||
ATOMIC_T chsw_on;
|
||||
u8 addr[ETH_ALEN];
|
||||
u8 off_ch_num;
|
||||
u8 ch_offset;
|
||||
u32 cur_time;
|
||||
u8 delay_switch_back;
|
||||
u8 dump_stack;
|
||||
};
|
||||
#endif
|
||||
|
||||
struct tdls_info {
|
||||
u8 ap_prohibited;
|
||||
uint setup_state;
|
||||
u8 ch_switch_prohibited;
|
||||
u8 link_established;
|
||||
u8 sta_cnt;
|
||||
u8 sta_maximum; // 1:tdls sta is equal (NUM_STA-1), reach max direct link number; 0: else;
|
||||
u8 sta_maximum; /* 1:tdls sta is equal (NUM_STA-1), reach max direct link number; 0: else; */
|
||||
struct tdls_ss_record ss_record;
|
||||
u8 macid_index; //macid entry that is ready to write
|
||||
u8 clear_cam; //cam entry that is trying to clear, using it in direct link teardown
|
||||
#ifdef CONFIG_TDLS_CH_SW
|
||||
struct tdls_ch_switch chsw_info;
|
||||
#endif
|
||||
|
||||
u8 ch_sensing;
|
||||
u8 cur_channel;
|
||||
u8 candidate_ch;
|
||||
u8 collect_pkt_num[MAX_CHANNEL_NUM];
|
||||
_lock cmd_lock;
|
||||
_lock hdl_lock;
|
||||
u8 watchdog_count;
|
||||
u8 dev_discovered; //WFD_TDLS: for sigma test
|
||||
u8 enable;
|
||||
u8 dev_discovered; /* WFD_TDLS: for sigma test */
|
||||
u8 tdls_enable;
|
||||
|
||||
/* Let wpa_supplicant to setup*/
|
||||
u8 driver_setup;
|
||||
#ifdef CONFIG_WFD
|
||||
struct wifi_display_info *wfd_info;
|
||||
#endif
|
||||
#endif
|
||||
};
|
||||
|
||||
struct tdls_txmgmt {
|
||||
u8 peer[ETH_ALEN];
|
||||
u8 action_code;
|
||||
u8 dialog_token;
|
||||
u16 status_code;
|
||||
u8 *buf;
|
||||
size_t len;
|
||||
};
|
||||
|
||||
/* used for mlme_priv.roam_flags */
|
||||
enum {
|
||||
RTW_ROAM_ON_EXPIRED = BIT0,
|
||||
RTW_ROAM_ON_RESUME = BIT1,
|
||||
RTW_ROAM_ACTIVE = BIT2,
|
||||
};
|
||||
|
||||
struct beacon_keys {
|
||||
u8 ssid[IW_ESSID_MAX_SIZE];
|
||||
u32 ssid_len;
|
||||
u8 bcn_channel;
|
||||
u16 ht_cap_info;
|
||||
u8 ht_info_infos_0_sco; // bit0 & bit1 in infos[0] is second channel offset
|
||||
int encryp_protocol;
|
||||
int pairwise_cipher;
|
||||
int group_cipher;
|
||||
int is_8021x;
|
||||
};
|
||||
|
||||
struct mlme_priv {
|
||||
@@ -380,9 +470,15 @@ struct mlme_priv {
|
||||
sint fw_state; //shall we protect this variable? maybe not necessarily...
|
||||
u8 bScanInProcess;
|
||||
u8 to_join; //flag
|
||||
#ifdef CONFIG_LAYER2_ROAMING
|
||||
u8 to_roaming; // roaming trying times
|
||||
#endif
|
||||
#ifdef CONFIG_LAYER2_ROAMING
|
||||
u8 to_roam; /* roaming trying times */
|
||||
struct wlan_network *roam_network; /* the target of active roam */
|
||||
u8 roam_flags;
|
||||
u8 roam_rssi_diff_th; /* rssi difference threshold for active scan candidate selection */
|
||||
u32 roam_scan_int_ms; /* scan interval for active roam */
|
||||
u32 roam_scanr_exp_ms; /* scan result expire time in ms for roam */
|
||||
u8 roam_tgt_addr[ETH_ALEN]; /* request to roam to speicific target without other consideration */
|
||||
#endif
|
||||
|
||||
u8 *nic_hdl;
|
||||
|
||||
@@ -397,10 +493,22 @@ struct mlme_priv {
|
||||
u8 assoc_bssid[6];
|
||||
|
||||
struct wlan_network cur_network;
|
||||
struct wlan_network *cur_network_scanned;
|
||||
|
||||
// bcn check info
|
||||
struct beacon_keys cur_beacon_keys; // save current beacon keys
|
||||
struct beacon_keys new_beacon_keys; // save new beacon keys
|
||||
u8 new_beacon_cnts; // if new_beacon_cnts >= threshold, ap beacon is changed
|
||||
|
||||
#ifdef CONFIG_ARP_KEEP_ALIVE
|
||||
// for arp offload keep alive
|
||||
u8 gw_mac_addr[6];
|
||||
u8 gw_ip[4];
|
||||
#endif
|
||||
|
||||
//uint wireless_mode; no used, remove it
|
||||
|
||||
u32 scan_interval;
|
||||
u32 auto_scan_int_ms;
|
||||
|
||||
_timer assoc_timer;
|
||||
|
||||
@@ -410,10 +518,10 @@ struct mlme_priv {
|
||||
_timer scan_to_timer; // driver itself handles scan_timeout status.
|
||||
u32 scan_start_time; // used to evaluate the time spent in scanning
|
||||
|
||||
#ifdef CONFIG_SET_SCAN_DENY_TIMER
|
||||
#ifdef CONFIG_SET_SCAN_DENY_TIMER
|
||||
_timer set_scan_deny_timer;
|
||||
ATOMIC_T set_scan_deny; //0: allowed, 1: deny
|
||||
#endif
|
||||
#endif
|
||||
|
||||
struct qos_priv qospriv;
|
||||
|
||||
@@ -423,7 +531,7 @@ struct mlme_priv {
|
||||
int num_sta_no_ht;
|
||||
|
||||
/* Number of HT AP/stations 20 MHz */
|
||||
//int num_sta_ht_20mhz;
|
||||
//int num_sta_ht_20mhz;
|
||||
|
||||
|
||||
int num_FortyMHzIntolerant;
|
||||
@@ -435,17 +543,21 @@ struct mlme_priv {
|
||||
#ifdef CONFIG_80211AC_VHT
|
||||
struct vht_priv vhtpriv;
|
||||
#endif
|
||||
#ifdef CONFIG_BEAMFORMING
|
||||
struct beamforming_info beamforming_info;
|
||||
#endif
|
||||
|
||||
#ifdef CONFIG_DFS
|
||||
u8 handle_dfs;
|
||||
#endif //CONFIG_DFS
|
||||
|
||||
RT_LINK_DETECT_T LinkDetectInfo;
|
||||
_timer dynamic_chk_timer; //dynamic/periodic check timer
|
||||
|
||||
u8 key_mask; //use for ips to set wep key after ips_leave
|
||||
u8 acm_mask; // for wmm acm mask
|
||||
u8 ChannelPlan;
|
||||
RT_SCAN_TYPE scan_mode; // active: 1, passive: 0
|
||||
|
||||
//u8 probereq_wpsie[MAX_WPS_IE_LEN];//added in probe req
|
||||
//int probereq_wpsie_len;
|
||||
u8 *wps_probe_req_ie;
|
||||
u32 wps_probe_req_ie_len;
|
||||
|
||||
@@ -473,17 +585,17 @@ struct mlme_priv {
|
||||
|
||||
/* Overlapping BSS information */
|
||||
int olbc_ht;
|
||||
|
||||
|
||||
#ifdef CONFIG_80211N_HT
|
||||
u16 ht_op_mode;
|
||||
#endif /* CONFIG_80211N_HT */
|
||||
#endif /* CONFIG_80211N_HT */
|
||||
|
||||
u8 *assoc_req;
|
||||
u32 assoc_req_len;
|
||||
u8 *assoc_rsp;
|
||||
u32 assoc_rsp_len;
|
||||
|
||||
u8 *wps_beacon_ie;
|
||||
u8 *wps_beacon_ie;
|
||||
//u8 *wps_probe_req_ie;
|
||||
u8 *wps_probe_resp_ie;
|
||||
u8 *wps_assoc_resp_ie; // for CONFIG_IOCTL_CFG80211, this IE could include p2p ie / wfd ie
|
||||
@@ -492,11 +604,11 @@ struct mlme_priv {
|
||||
//u32 wps_probe_req_ie_len;
|
||||
u32 wps_probe_resp_ie_len;
|
||||
u32 wps_assoc_resp_ie_len; // for CONFIG_IOCTL_CFG80211, this IE len could include p2p ie / wfd ie
|
||||
|
||||
|
||||
u8 *p2p_beacon_ie;
|
||||
u8 *p2p_probe_req_ie;
|
||||
u8 *p2p_probe_resp_ie;
|
||||
u8 *p2p_go_probe_resp_ie; //for GO
|
||||
u8 *p2p_probe_resp_ie;
|
||||
u8 *p2p_go_probe_resp_ie; //for GO
|
||||
u8 *p2p_assoc_req_ie;
|
||||
|
||||
u32 p2p_beacon_ie_len;
|
||||
@@ -504,31 +616,31 @@ struct mlme_priv {
|
||||
u32 p2p_probe_resp_ie_len;
|
||||
u32 p2p_go_probe_resp_ie_len; //for GO
|
||||
u32 p2p_assoc_req_ie_len;
|
||||
/*
|
||||
#if defined(CONFIG_P2P) && defined(CONFIG_IOCTL_CFG80211)
|
||||
//u8 *wps_p2p_beacon_ie;
|
||||
u8 *p2p_beacon_ie;
|
||||
u8 *wps_p2p_probe_resp_ie;
|
||||
u8 *wps_p2p_assoc_resp_ie;
|
||||
//u32 wps_p2p_beacon_ie_len;
|
||||
u32 p2p_beacon_ie_len;
|
||||
u32 wps_p2p_probe_resp_ie_len;
|
||||
u32 wps_p2p_assoc_resp_ie_len;
|
||||
#endif
|
||||
*/
|
||||
|
||||
/*
|
||||
#if defined(CONFIG_P2P) && defined(CONFIG_IOCTL_CFG80211)
|
||||
//u8 *wps_p2p_beacon_ie;
|
||||
u8 *p2p_beacon_ie;
|
||||
u8 *wps_p2p_probe_resp_ie;
|
||||
u8 *wps_p2p_assoc_resp_ie;
|
||||
//u32 wps_p2p_beacon_ie_len;
|
||||
u32 p2p_beacon_ie_len;
|
||||
u32 wps_p2p_probe_resp_ie_len;
|
||||
u32 wps_p2p_assoc_resp_ie_len;
|
||||
#endif
|
||||
*/
|
||||
|
||||
_lock bcn_update_lock;
|
||||
u8 update_bcn;
|
||||
|
||||
|
||||
|
||||
|
||||
#endif //#if defined (CONFIG_AP_MODE) && defined (CONFIG_NATIVEAP_MLME)
|
||||
|
||||
#if defined(CONFIG_WFD) && defined(CONFIG_IOCTL_CFG80211)
|
||||
|
||||
|
||||
u8 *wfd_beacon_ie;
|
||||
u8 *wfd_probe_req_ie;
|
||||
u8 *wfd_probe_resp_ie;
|
||||
u8 *wfd_go_probe_resp_ie; //for GO
|
||||
u8 *wfd_probe_resp_ie;
|
||||
u8 *wfd_go_probe_resp_ie; //for GO
|
||||
u8 *wfd_assoc_req_ie;
|
||||
|
||||
u32 wfd_beacon_ie_len;
|
||||
@@ -554,28 +666,55 @@ struct mlme_priv {
|
||||
u8 channel_idx;
|
||||
u8 group_cnt; //In WiDi 3.5, they specified another scan algo. for WFD/RDS co-existed
|
||||
u8 sa_ext[L2SDTA_SERVICE_VE_LEN];
|
||||
|
||||
u8 widi_enable;
|
||||
/**
|
||||
* For WiDi 4; upper layer would set
|
||||
* p2p_primary_device_type_category_id
|
||||
* p2p_primary_device_type_sub_category_id
|
||||
* p2p_secondary_device_type_category_id
|
||||
* p2p_secondary_device_type_sub_category_id
|
||||
*/
|
||||
u16 p2p_pdt_cid;
|
||||
u16 p2p_pdt_scid;
|
||||
u8 num_p2p_sdt;
|
||||
u16 p2p_sdt_cid[MAX_NUM_P2P_SDT];
|
||||
u16 p2p_sdt_scid[MAX_NUM_P2P_SDT];
|
||||
u8 p2p_reject_disable; //When starting NL80211 wpa_supplicant/hostapd, it will call netdev_close
|
||||
//such that it will cause p2p disabled. Use this flag to reject.
|
||||
#endif // CONFIG_INTEL_WIDI
|
||||
|
||||
#ifdef CONFIG_CONCURRENT_MODE
|
||||
u8 scanning_via_buddy_intf;
|
||||
#endif
|
||||
|
||||
#ifdef CONFIG_FTP_PROTECT
|
||||
u8 ftp_lock_flag;
|
||||
#endif //CONFIG_FTP_PROTECT
|
||||
// u8 NumOfBcnInfoChkFail;
|
||||
// u32 timeBcnInfoChkStart;
|
||||
};
|
||||
|
||||
#define mlme_set_scan_to_timer(mlme, ms) \
|
||||
do { \
|
||||
/* DBG_871X("%s set_scan_to_timer(%p, %d)\n", __FUNCTION__, (mlme), (ms)); */ \
|
||||
_set_timer(&(mlme)->scan_to_timer, (ms)); \
|
||||
} while(0)
|
||||
|
||||
#define rtw_mlme_set_auto_scan_int(adapter, ms) \
|
||||
do { \
|
||||
adapter->mlmepriv.auto_scan_int_ms = ms; \
|
||||
while (0)
|
||||
|
||||
void rtw_mlme_reset_auto_scan_int(_adapter *adapter);
|
||||
|
||||
#ifdef CONFIG_AP_MODE
|
||||
|
||||
struct hostapd_priv
|
||||
{
|
||||
struct hostapd_priv {
|
||||
_adapter *padapter;
|
||||
|
||||
#ifdef CONFIG_HOSTAPD_MLME
|
||||
struct net_device *pmgnt_netdev;
|
||||
struct usb_anchor anchored;
|
||||
#endif
|
||||
|
||||
#endif
|
||||
|
||||
};
|
||||
|
||||
extern int hostapd_mode_init(_adapter *padapter);
|
||||
@@ -591,6 +730,7 @@ extern void rtw_stassoc_event_callback(_adapter *adapter, u8 *pbuf);
|
||||
extern void rtw_stadel_event_callback(_adapter *adapter, u8 *pbuf);
|
||||
extern void rtw_atimdone_event_callback(_adapter *adapter, u8 *pbuf);
|
||||
extern void rtw_cpwm_event_callback(_adapter *adapter, u8 *pbuf);
|
||||
extern void rtw_wmm_event_callback(PADAPTER padapter, u8 *pbuf);
|
||||
|
||||
extern void rtw_join_timeout_handler(RTW_TIMER_HDL_ARGS);
|
||||
extern void _rtw_scan_timeout_handler(RTW_TIMER_HDL_ARGS);
|
||||
@@ -604,11 +744,12 @@ extern void rtw_free_mlme_priv (struct mlme_priv *pmlmepriv);
|
||||
|
||||
|
||||
extern sint rtw_select_and_join_from_scanned_queue(struct mlme_priv *pmlmepriv);
|
||||
extern sint rtw_set_key(_adapter *adapter,struct security_priv *psecuritypriv,sint keyid, u8 set_tx);
|
||||
extern sint rtw_set_key(_adapter *adapter,struct security_priv *psecuritypriv,sint keyid, u8 set_tx, bool enqueue);
|
||||
extern sint rtw_set_auth(_adapter *adapter,struct security_priv *psecuritypriv);
|
||||
|
||||
__inline static u8 *get_bssid(struct mlme_priv *pmlmepriv)
|
||||
{ //if sta_mode:pmlmepriv->cur_network.network.MacAddress=> bssid
|
||||
{
|
||||
//if sta_mode:pmlmepriv->cur_network.network.MacAddress=> bssid
|
||||
// if adhoc_mode:pmlmepriv->cur_network.network.MacAddress=> ibss mac address
|
||||
return pmlmepriv->cur_network.network.MacAddress;
|
||||
}
|
||||
@@ -637,7 +778,7 @@ __inline static void set_fwstate(struct mlme_priv *pmlmepriv, sint state)
|
||||
{
|
||||
pmlmepriv->fw_state |= state;
|
||||
//FOR HW integration
|
||||
if(_FW_UNDER_SURVEY==state){
|
||||
if(_FW_UNDER_SURVEY==state) {
|
||||
pmlmepriv->bScanInProcess = _TRUE;
|
||||
}
|
||||
}
|
||||
@@ -646,7 +787,7 @@ __inline static void _clr_fwstate_(struct mlme_priv *pmlmepriv, sint state)
|
||||
{
|
||||
pmlmepriv->fw_state &= ~state;
|
||||
//FOR HW integration
|
||||
if(_FW_UNDER_SURVEY==state){
|
||||
if(_FW_UNDER_SURVEY==state) {
|
||||
pmlmepriv->bScanInProcess = _FALSE;
|
||||
}
|
||||
}
|
||||
@@ -686,6 +827,7 @@ __inline static void up_scanned_network(struct mlme_priv *pmlmepriv)
|
||||
#ifdef CONFIG_CONCURRENT_MODE
|
||||
sint rtw_buddy_adapter_up(_adapter *padapter);
|
||||
sint check_buddy_fwstate(_adapter *padapter, sint state);
|
||||
u8 rtw_get_buddy_bBusyTraffic(_adapter *padapter);
|
||||
#endif //CONFIG_CONCURRENT_MODE
|
||||
|
||||
__inline static void down_scanned_network(struct mlme_priv *pmlmepriv)
|
||||
@@ -712,6 +854,8 @@ extern void rtw_disconnect_hdl_under_linked(_adapter* adapter, struct sta_info *
|
||||
extern void rtw_generate_random_ibss(u8 *pibss);
|
||||
extern struct wlan_network* rtw_find_network(_queue *scanned_queue, u8 *addr);
|
||||
extern struct wlan_network* rtw_get_oldest_wlan_network(_queue *scanned_queue);
|
||||
struct wlan_network *_rtw_find_same_network(_queue *scanned_queue, struct wlan_network *network);
|
||||
struct wlan_network *rtw_find_same_network(_queue *scanned_queue, struct wlan_network *network);
|
||||
|
||||
extern void rtw_free_assoc_resources(_adapter* adapter, int lock_scanned_queue);
|
||||
extern void rtw_indicate_disconnect(_adapter* adapter);
|
||||
@@ -777,27 +921,56 @@ u8 *rtw_get_beacon_interval_from_ie(u8 *ie);
|
||||
void rtw_joinbss_reset(_adapter *padapter);
|
||||
|
||||
#ifdef CONFIG_80211N_HT
|
||||
unsigned int rtw_restructure_ht_ie(_adapter *padapter, u8 *in_ie, u8 *out_ie, uint in_len, uint *pout_len);
|
||||
void rtw_ht_use_default_setting(_adapter *padapter);
|
||||
void rtw_build_wmm_ie_ht(_adapter *padapter, u8 *out_ie, uint *pout_len);
|
||||
unsigned int rtw_restructure_ht_ie(_adapter *padapter, u8 *in_ie, u8 *out_ie, uint in_len, uint *pout_len, u8 channel);
|
||||
void rtw_update_ht_cap(_adapter *padapter, u8 *pie, uint ie_len, u8 channel);
|
||||
void rtw_issue_addbareq_cmd(_adapter *padapter, struct xmit_frame *pxmitframe);
|
||||
void rtw_append_exented_cap(_adapter *padapter, u8 *out_ie, uint *pout_len);
|
||||
#endif
|
||||
|
||||
int rtw_is_same_ibss(_adapter *adapter, struct wlan_network *pnetwork);
|
||||
int is_same_network(WLAN_BSSID_EX *src, WLAN_BSSID_EX *dst);
|
||||
int is_same_network(WLAN_BSSID_EX *src, WLAN_BSSID_EX *dst, u8 feature);
|
||||
|
||||
#ifdef CONFIG_LAYER2_ROAMING
|
||||
#define rtw_roam_flags(adapter) ((adapter)->mlmepriv.roam_flags)
|
||||
#define rtw_chk_roam_flags(adapter, flags) ((adapter)->mlmepriv.roam_flags & flags)
|
||||
#define rtw_clr_roam_flags(adapter, flags) \
|
||||
do { \
|
||||
((adapter)->mlmepriv.roam_flags &= ~flags); \
|
||||
} while (0)
|
||||
|
||||
#define rtw_set_roam_flags(adapter, flags) \
|
||||
do { \
|
||||
((adapter)->mlmepriv.roam_flags |= flags); \
|
||||
} while (0)
|
||||
|
||||
#define rtw_assign_roam_flags(adapter, flags) \
|
||||
do { \
|
||||
((adapter)->mlmepriv.roam_flags = flags); \
|
||||
} while (0)
|
||||
|
||||
void _rtw_roaming(_adapter *adapter, struct wlan_network *tgt_network);
|
||||
void rtw_roaming(_adapter *adapter, struct wlan_network *tgt_network);
|
||||
void rtw_set_roaming(_adapter *adapter, u8 to_roaming);
|
||||
u8 rtw_to_roaming(_adapter *adapter);
|
||||
void rtw_set_to_roam(_adapter *adapter, u8 to_roam);
|
||||
u8 rtw_dec_to_roam(_adapter *adapter);
|
||||
u8 rtw_to_roam(_adapter *adapter);
|
||||
int rtw_select_roaming_candidate(struct mlme_priv *pmlmepriv);
|
||||
#else
|
||||
#define rtw_roam_flags(adapter) 0
|
||||
#define rtw_chk_roam_flags(adapter, flags) 0
|
||||
#define rtw_clr_roam_flags(adapter, flags) do {} while (0)
|
||||
#define rtw_set_roam_flags(adapter, flags) do {} while (0)
|
||||
#define rtw_assign_roam_flags(adapter, flags) do {} while (0)
|
||||
#define _rtw_roaming(adapter, tgt_network) do {} while(0)
|
||||
#define rtw_roaming(adapter, tgt_network) do {} while(0)
|
||||
#define rtw_set_roaming(adapter, to_roaming) do {} while(0)
|
||||
#define rtw_to_roaming(adapter) 0
|
||||
#endif
|
||||
#define rtw_set_to_roam(adapter, to_roam) do {} while(0)
|
||||
#define rtw_dec_to_roam(adapter) 0
|
||||
#define rtw_to_roam(adapter) 0
|
||||
#define rtw_select_roaming_candidate(mlme) _FAIL
|
||||
#endif /* CONFIG_LAYER2_ROAMING */
|
||||
|
||||
void rtw_stassoc_hw_rpt(_adapter *adapter,struct sta_info *psta);
|
||||
void rtw_sta_media_status_rpt(_adapter *adapter,struct sta_info *psta, u32 mstatus);
|
||||
|
||||
#ifdef CONFIG_INTEL_PROXIM
|
||||
void rtw_proxim_enable(_adapter *padapter);
|
||||
|
||||
Reference in New Issue
Block a user