mirror of
https://github.com/cookiengineer/audacity
synced 2025-11-04 08:04:06 +01:00
71 lines
3.1 KiB
Common Lisp
71 lines
3.1 KiB
Common Lisp
;(set-control-srate 100)
|
|
;(set-sound-srate 100)
|
|
|
|
;(setf xx (pwl 0 1 1 0 1.1 1 1.8 0 2 1 3 0 5))
|
|
;(setf xx (pwl 0 1 1 .2 1.1 1 1.8 .2 2 1 3 0 5))
|
|
|
|
;(setf yy (snd-follow xx 0.1 0.25 1.0 30))
|
|
|
|
;(setf db-factor (/ 1.0 (log 0.00001)))
|
|
|
|
|
|
; COMPRESS-MAP -- constructs a map for the compress function
|
|
;
|
|
; The map consists of two parts: a compression part and an expansion part.
|
|
; The intended use is to compress everything above compress-threshold by
|
|
; compress-ratio, and to downward expand everything below expand-ratio
|
|
; by expand-ratio. Thresholds are in dB and ratios are dB-per-dB.
|
|
; 0dB corresponds to an amplitude of 1.0
|
|
; If the input goes above 0dB, the output can optionally be limited
|
|
; by seting limit-flag to T. This effectively changes the compression
|
|
; ratio to infinity at 0dB. If limit-flag is NIL, then the compression-ratio
|
|
; continues to apply above 0dB.
|
|
; It is assumed that expand-threshold <= compress-threshold <= 0
|
|
; The gain is unity at 0dB so if compression-ratio > 1, then gain
|
|
; will be greater than unity below 0dB
|
|
|
|
;(defun compress-map (compress-ratio compress-threshold expand-ratio
|
|
; expand-threshold limit-flag)
|
|
; (let ()
|
|
; (
|
|
;; I'm not sure if the rest of this function was lost due to version
|
|
;; problems, or it never existed. Email to rbd@cs.cmu.edu if you would
|
|
;; like some help with dynamics compression.
|
|
;;
|
|
;; Also, I had a really great 2-stage compressor for speech -- it did
|
|
;; something like a noise gate with a short time constant, and an automatic
|
|
;; gain control with a long time constant. Each one varied the gain by
|
|
;; about 12 dB -- any more would cause really ugly noise pumping, but
|
|
;; without the combined actions of both, there was not enough control.
|
|
;; Again, email me if you are interested. Lately, I've been using
|
|
;; more sophisticated multiple band noise reduction in Cool Edit. They
|
|
;; obviously put a lot of work into that, and I don't plan to redo the
|
|
;; work for Nyquist. -RBD
|
|
|
|
|
|
(defun compress (input map rise-time fall-time)
|
|
; take the square of the input to get power
|
|
(let ((in-squared (mult input input)))
|
|
; compute the time-average (sort of a low-pass) of the square
|
|
(setf avg (snd-avg in-squared 1000 500 OP-AVERAGE))
|
|
; use follower to anticipate rise and trail off smoothly
|
|
(setf env (snd-follow avg 0.001 0.2 1.0 20))
|
|
; take logarithm to get dB instead of linear
|
|
(setf logenv (snd-log env))
|
|
; tricky part: map converts dB of input to desired gain in dB
|
|
; this defines the character of the compressor
|
|
(setf shaped-env (shape logenv map 1.0))
|
|
; go back to linear
|
|
(setf gain (snd-exp shaped-env))
|
|
; return the scaled input sound,
|
|
; another trick: avg signal will be delayed. Also, snd-follow
|
|
; has a delayed response because it's looking ahead in sound
|
|
; 20 = the number of samples of lookahead from snd-follow
|
|
; 88.2 = 44,100 (sample rate) / 500 (the step-size in avg)
|
|
; in other words, 44100/500 is the sample rate of the control
|
|
; signal looked at by follow
|
|
; "44100" should be replace by the signal's sample rate
|
|
; = (snd-srate input)
|
|
(mult (seq (s-rest (/ 20.0 88.2)) (cue input)) gain)))
|
|
|