# Makefile.in generated by automake 1.10.2 from Makefile.am.
# @configure_input@

# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
# 2003, 2004, 2005, 2006, 2007, 2008  Free Software Foundation, Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.

# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.

@SET_MAKE@

# -*- Mode: Makefile -*-
#
# Makefile.am - automake file for Raptor docs
#
# Copyright (C) 2000-2006, David Beckett http://purl.org/net/dajobe/
# Copyright (C) 2000-2005, University of Bristol, UK http://www.bristol.ac.uk/
# 
# This package is Free Software and part of Redland http://librdf.org/
# 
# It is licensed under the following three licenses as alternatives:
#   1. GNU Lesser General Public License (LGPL) V2.1 or any newer version
#   2. GNU General Public License (GPL) V2 or any newer version
#   3. Apache License, V2.0 or any newer version
# 
# You may not use this file except in compliance with at least one of
# the above three licenses.
# 
# See LICENSE.html or LICENSE.txt at the top of this package for the
# complete terms and further detail along with the license texts for
# the licenses in COPYING.LIB, COPYING and LICENSE-2.0.txt respectively.
# 
# 

# -*- mode: makefile -*-

####################################
# Everything below here is generic #
####################################
VPATH = @srcdir@
pkgdatadir = $(datadir)/@PACKAGE@
pkglibdir = $(libdir)/@PACKAGE@
pkgincludedir = $(includedir)/@PACKAGE@
am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
install_sh_DATA = $(install_sh) -c -m 644
install_sh_PROGRAM = $(install_sh) -c
install_sh_SCRIPT = $(install_sh) -c
INSTALL_HEADER = $(INSTALL_DATA)
transform = $(program_transform_name)
NORMAL_INSTALL = :
PRE_INSTALL = :
POST_INSTALL = :
NORMAL_UNINSTALL = :
PRE_UNINSTALL = :
POST_UNINSTALL = :
build_triplet = @build@
host_triplet = @host@
DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in \
	$(srcdir)/version.xml.in $(top_srcdir)/gtk-doc.make
subdir = docs
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
	$(ACLOCAL_M4)
mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs
CONFIG_HEADER = $(top_builddir)/src/raptor_config.h
CONFIG_CLEAN_FILES = version.xml
SOURCES =
DIST_SOURCES =
man3dir = $(mandir)/man3
am__installdirs = "$(DESTDIR)$(man3dir)"
NROFF = nroff
MANS = $(man_MANS)
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
ACLOCAL = @ACLOCAL@
AMTAR = @AMTAR@
AR = @AR@
AUTOCONF = @AUTOCONF@
AUTOHEADER = @AUTOHEADER@
AUTOMAKE = @AUTOMAKE@
AWK = @AWK@
CC = @CC@
CCDEPMODE = @CCDEPMODE@
CFLAGS = @CFLAGS@
CPP = @CPP@
CPPFLAGS = @CPPFLAGS@
CURL_CONFIG = @CURL_CONFIG@
CXXCPP = @CXXCPP@
CYGPATH_W = @CYGPATH_W@
DEFS = @DEFS@
DEPDIR = @DEPDIR@
DSYMUTIL = @DSYMUTIL@
ECHO = @ECHO@
ECHO_C = @ECHO_C@
ECHO_N = @ECHO_N@
ECHO_T = @ECHO_T@
EGREP = @EGREP@
EXEEXT = @EXEEXT@
GREP = @GREP@
GTKDOC_CHECK = @GTKDOC_CHECK@
HTML_DIR = @HTML_DIR@
INSTALL = @INSTALL@
INSTALL_DATA = @INSTALL_DATA@
INSTALL_PROGRAM = @INSTALL_PROGRAM@
INSTALL_SCRIPT = @INSTALL_SCRIPT@
INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
LDFLAGS = @LDFLAGS@
LEX = @LEX@
LEXLIB = @LEXLIB@
LEX_OUTPUT_ROOT = @LEX_OUTPUT_ROOT@
LIBOBJS = @LIBOBJS@
LIBS = @LIBS@
LIBTOOL = @LIBTOOL@
LN_S = @LN_S@
LTLIBOBJS = @LTLIBOBJS@
MAINT = @MAINT@
MAKEINFO = @MAKEINFO@
MEM = @MEM@
MEM_LIBS = @MEM_LIBS@
MKDIR_P = @MKDIR_P@
NMEDIT = @NMEDIT@
OBJEXT = @OBJEXT@
PACKAGE = @PACKAGE@
PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
PACKAGE_NAME = @PACKAGE_NAME@
PACKAGE_STRING = @PACKAGE_STRING@
PACKAGE_TARNAME = @PACKAGE_TARNAME@
PACKAGE_VERSION = @PACKAGE_VERSION@
PATH_SEPARATOR = @PATH_SEPARATOR@
PERL = @PERL@
PKG_CONFIG = @PKG_CONFIG@
RANLIB = @RANLIB@
RAPTOR_LIBTOOLLIBS = @RAPTOR_LIBTOOLLIBS@
RAPTOR_LIBTOOL_VERSION = @RAPTOR_LIBTOOL_VERSION@
RAPTOR_PARSERS = @RAPTOR_PARSERS@
RAPTOR_SERIALIZERS = @RAPTOR_SERIALIZERS@
RAPTOR_VERSION_DECIMAL = @RAPTOR_VERSION_DECIMAL@
RAPTOR_WWW_LIBRARY = @RAPTOR_WWW_LIBRARY@
RAPTOR_XML_PARSER = @RAPTOR_XML_PARSER@
RPM_RELEASE = @RPM_RELEASE@
SED = @SED@
SET_MAKE = @SET_MAKE@
SHELL = @SHELL@
STANDARD_CFLAGS = @STANDARD_CFLAGS@
STRIP = @STRIP@
TAR = @TAR@
VERSION = @VERSION@
XML_CONFIG = @XML_CONFIG@
XSLT_CONFIG = @XSLT_CONFIG@
YACC = @YACC@
YFLAGS = @YFLAGS@
abs_builddir = @abs_builddir@
abs_srcdir = @abs_srcdir@
abs_top_builddir = @abs_top_builddir@
abs_top_srcdir = @abs_top_srcdir@
ac_ct_CC = @ac_ct_CC@
am__include = @am__include@
am__leading_dot = @am__leading_dot@
am__quote = @am__quote@
am__tar = @am__tar@
am__untar = @am__untar@
bindir = @bindir@
build = @build@
build_alias = @build_alias@
build_cpu = @build_cpu@
build_os = @build_os@
build_vendor = @build_vendor@
builddir = @builddir@
datadir = @datadir@
datarootdir = @datarootdir@
docdir = @docdir@
dvidir = @dvidir@
exec_prefix = @exec_prefix@
host = @host@
host_alias = @host_alias@
host_cpu = @host_cpu@
host_os = @host_os@
host_vendor = @host_vendor@
htmldir = @htmldir@
includedir = @includedir@
infodir = @infodir@
install_sh = @install_sh@
libdir = @libdir@
libexecdir = @libexecdir@
localedir = @localedir@
localstatedir = @localstatedir@
mandir = @mandir@
mkdir_p = @mkdir_p@
oldincludedir = @oldincludedir@
pdfdir = @pdfdir@
prefix = @prefix@
program_transform_name = @program_transform_name@
psdir = @psdir@
sbindir = @sbindir@
sharedstatedir = @sharedstatedir@
srcdir = @srcdir@
sysconfdir = @sysconfdir@
target_alias = @target_alias@
top_build_prefix = @top_build_prefix@
top_builddir = @top_builddir@
top_srcdir = @top_srcdir@

# The name of the module.
DOC_MODULE = raptor

# The top-level SGML file.
DOC_MAIN_SGML_FILE = raptor-docs.xml

# Extra options to supply to gtkdoc-scan
SCAN_OPTIONS = 

# The directory containing the source code. Relative to $(srcdir)
DOC_SOURCE_DIR = ../src

# Used for dependencies
HFILE_GLOB = $(top_srcdir)/src/raptor.h
CFILE_GLOB = $(top_srcdir)/src/raptor_*.c
IGNORE_CFILES = \
n3_lexer.c \
n3_parser.c \
raptor_nfc_test.c \
raptor_rss_common.c \
raptor_xsd.c \
turtle_lexer.c \
turtle_parser.c \
turtle_common.c \
parsedate.c \
strcasecmp.c


# Headers to ignore
IGNORE_HFILES = \
	n3_common.h \
	n3_lexer.h \
	n3_parser.h \
	parsedate.h \
	raptor_config.h \
	raptor_internal.h \
	raptor_nfc.h \
	raptor_rss.h \
	turtle_common.h \
	turtle_lexer.h \
	turtle_parser.h \
	win32_raptor_config.h


# CFLAGS and LDFLAGS for compiling scan program. Only needed
# if $(DOC_MODULE).types is non-empty.
AM_CPPFLAGS = 
GTKDOC_LIBS = 

# Extra options to supply to gtkdoc-mkdb
MKDB_OPTIONS = --sgml-mode --output-format=xml --ignore-files="$(IGNORE_CFILES)"

# Extra options to supply to gtkdoc-mktmpl
MKTMPL_OPTIONS = 

# Non-autogenerated (XML, other) files to be included in $(DOC_MAIN_SGML_FILE)
content_files = \
	raptor-parsers.xml \
	raptor-serializers.xml \
	raptor-tutorial-intro.xml \
	raptor-tutorial-querying-functionality.xml \
	raptor-tutorial-parsing.xml \
	raptor-tutorial-serializing.xml \
	version.xml \
	rdfprint.c \
	rdfcat.c \
	rdfserialize.c


# Images to copy into HTML directory
HTML_IMAGES = 

# Extra options to supply to gtkdoc-fixref
FIXXREF_OPTIONS = 
@GTK_DOC_USE_LIBTOOL_FALSE@GTKDOC_CC = $(CC) $(INCLUDES) $(AM_CFLAGS) $(CFLAGS)
@GTK_DOC_USE_LIBTOOL_TRUE@GTKDOC_CC = $(LIBTOOL) --mode=compile $(CC) $(INCLUDES) $(AM_CFLAGS) $(CFLAGS)
@GTK_DOC_USE_LIBTOOL_FALSE@GTKDOC_LD = $(CC) $(AM_CFLAGS) $(CFLAGS) $(LDFLAGS)
@GTK_DOC_USE_LIBTOOL_TRUE@GTKDOC_LD = $(LIBTOOL) --mode=link $(CC) $(AM_CFLAGS) $(CFLAGS) $(LDFLAGS)

# We set GPATH here; this gives us semantics for GNU make
# which are more like other make's VPATH, when it comes to
# whether a source that is a target of one rule is then
# searched for in VPATH/GPATH.
#
GPATH = $(srcdir)
TARGET_DIR = $(HTML_DIR)/$(DOC_MODULE)
EXTRA_DIST = $(content_files) $(HTML_IMAGES) $(DOC_MAIN_SGML_FILE) \
	$(DOC_MODULE)-sections.txt $(DOC_MODULE)-overrides.txt \
	libraptor.html $(man_MANS) version.xml.in
DOC_STAMPS = scan-build.stamp tmpl-build.stamp sgml-build.stamp html-build.stamp \
	   $(srcdir)/tmpl.stamp $(srcdir)/sgml.stamp $(srcdir)/html.stamp

SCANOBJ_FILES = \
	$(DOC_MODULE).args 	 \
	$(DOC_MODULE).hierarchy  \
	$(DOC_MODULE).interfaces \
	$(DOC_MODULE).prerequisites \
	$(DOC_MODULE).signals

REPORT_FILES = \
	$(DOC_MODULE)-undocumented.txt \
	$(DOC_MODULE)-undeclared.txt \
	$(DOC_MODULE)-unused.txt

CLEANFILES = $(SCANOBJ_FILES) $(REPORT_FILES) $(DOC_STAMPS)
man_MANS = libraptor.3
all: all-am

.SUFFIXES:
$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(top_srcdir)/gtk-doc.make $(am__configure_deps)
	@for dep in $?; do \
	  case '$(am__configure_deps)' in \
	    *$$dep*) \
	      ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
	        && { if test -f $@; then exit 0; else break; fi; }; \
	      exit 1;; \
	  esac; \
	done; \
	echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu  docs/Makefile'; \
	cd $(top_srcdir) && \
	  $(AUTOMAKE) --gnu  docs/Makefile
.PRECIOUS: Makefile
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
	@case '$?' in \
	  *config.status*) \
	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
	  *) \
	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
	esac;

$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh

$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
version.xml: $(top_builddir)/config.status $(srcdir)/version.xml.in
	cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@

mostlyclean-libtool:
	-rm -f *.lo

clean-libtool:
	-rm -rf .libs _libs
install-man3: $(man3_MANS) $(man_MANS)
	@$(NORMAL_INSTALL)
	test -z "$(man3dir)" || $(MKDIR_P) "$(DESTDIR)$(man3dir)"
	@list='$(man3_MANS) $(dist_man3_MANS) $(nodist_man3_MANS)'; \
	l2='$(man_MANS) $(dist_man_MANS) $(nodist_man_MANS)'; \
	for i in $$l2; do \
	  case "$$i" in \
	    *.3*) list="$$list $$i" ;; \
	  esac; \
	done; \
	for i in $$list; do \
	  if test -f $$i; then file=$$i; \
	  else file=$(srcdir)/$$i; fi; \
	  ext=`echo $$i | sed -e 's/^.*\\.//'`; \
	  case "$$ext" in \
	    3*) ;; \
	    *) ext='3' ;; \
	  esac; \
	  inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \
	  inst=`echo $$inst | sed -e 's/^.*\///'`; \
	  inst=`echo $$inst | sed '$(transform)'`.$$ext; \
	  echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man3dir)/$$inst'"; \
	  $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man3dir)/$$inst"; \
	done
uninstall-man3:
	@$(NORMAL_UNINSTALL)
	@list='$(man3_MANS) $(dist_man3_MANS) $(nodist_man3_MANS)'; \
	l2='$(man_MANS) $(dist_man_MANS) $(nodist_man_MANS)'; \
	for i in $$l2; do \
	  case "$$i" in \
	    *.3*) list="$$list $$i" ;; \
	  esac; \
	done; \
	for i in $$list; do \
	  ext=`echo $$i | sed -e 's/^.*\\.//'`; \
	  case "$$ext" in \
	    3*) ;; \
	    *) ext='3' ;; \
	  esac; \
	  inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \
	  inst=`echo $$inst | sed -e 's/^.*\///'`; \
	  inst=`echo $$inst | sed '$(transform)'`.$$ext; \
	  echo " rm -f '$(DESTDIR)$(man3dir)/$$inst'"; \
	  rm -f "$(DESTDIR)$(man3dir)/$$inst"; \
	done
tags: TAGS
TAGS:

ctags: CTAGS
CTAGS:


distdir: $(DISTFILES)
	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
	list='$(DISTFILES)'; \
	  dist_files=`for file in $$list; do echo $$file; done | \
	  sed -e "s|^$$srcdirstrip/||;t" \
	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
	case $$dist_files in \
	  */*) $(MKDIR_P) `echo "$$dist_files" | \
			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
			   sort -u` ;; \
	esac; \
	for file in $$dist_files; do \
	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
	  if test -d $$d/$$file; then \
	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
	      cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
	    fi; \
	    cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
	  else \
	    test -f $(distdir)/$$file \
	    || cp -p $$d/$$file $(distdir)/$$file \
	    || exit 1; \
	  fi; \
	done
	$(MAKE) $(AM_MAKEFLAGS) \
	  top_distdir="$(top_distdir)" distdir="$(distdir)" \
	  dist-hook
check-am: all-am
check: check-am
all-am: Makefile $(MANS) all-local
installdirs:
	for dir in "$(DESTDIR)$(man3dir)"; do \
	  test -z "$$dir" || $(MKDIR_P) "$$dir"; \
	done
install: install-am
install-exec: install-exec-am
install-data: install-data-am
uninstall: uninstall-am

install-am: all-am
	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am

installcheck: installcheck-am
install-strip:
	$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
	  install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
	  `test -z '$(STRIP)' || \
	    echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
mostlyclean-generic:

clean-generic:
	-test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)

distclean-generic:
	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)

maintainer-clean-generic:
	@echo "This command is intended for maintainers to use"
	@echo "it deletes files that may require special tools to rebuild."
clean: clean-am

clean-am: clean-generic clean-libtool clean-local mostlyclean-am

distclean: distclean-am
	-rm -f Makefile
distclean-am: clean-am distclean-generic distclean-local

dvi: dvi-am

dvi-am:

html: html-am

info: info-am

info-am:

install-data-am: install-data-local install-man

install-dvi: install-dvi-am

install-exec-am:

install-html: install-html-am

install-info: install-info-am

install-man: install-man3

install-pdf: install-pdf-am

install-ps: install-ps-am

installcheck-am:

maintainer-clean: maintainer-clean-am
	-rm -f Makefile
maintainer-clean-am: distclean-am maintainer-clean-generic \
	maintainer-clean-local

mostlyclean: mostlyclean-am

mostlyclean-am: mostlyclean-generic mostlyclean-libtool

pdf: pdf-am

pdf-am:

ps: ps-am

ps-am:

uninstall-am: uninstall-local uninstall-man

uninstall-man: uninstall-man3

.MAKE: install-am install-strip

.PHONY: all all-am all-local check check-am clean clean-generic \
	clean-libtool clean-local dist-hook distclean \
	distclean-generic distclean-libtool distclean-local distdir \
	dvi dvi-am html html-am info info-am install install-am \
	install-data install-data-am install-data-local install-dvi \
	install-dvi-am install-exec install-exec-am install-html \
	install-html-am install-info install-info-am install-man \
	install-man3 install-pdf install-pdf-am install-ps \
	install-ps-am install-strip installcheck installcheck-am \
	installdirs maintainer-clean maintainer-clean-generic \
	maintainer-clean-local mostlyclean mostlyclean-generic \
	mostlyclean-libtool pdf pdf-am ps ps-am uninstall uninstall-am \
	uninstall-local uninstall-man uninstall-man3


@ENABLE_GTK_DOC_TRUE@all-local: html-build.stamp
@ENABLE_GTK_DOC_FALSE@all-local:

docs: html-build.stamp

#### scan ####

scan-build.stamp: $(HFILE_GLOB) $(CFILE_GLOB)
	@echo 'gtk-doc: Scanning header files'
	@-chmod -R u+w $(srcdir)
	cd $(srcdir) && \
	  gtkdoc-scan --module=$(DOC_MODULE) --source-dir=$(DOC_SOURCE_DIR) --ignore-headers="$(IGNORE_HFILES)" $(SCAN_OPTIONS) $(EXTRA_HFILES)
	if grep -l '^..*$$' $(srcdir)/$(DOC_MODULE).types > /dev/null 2>&1 ; then \
	    CC="$(GTKDOC_CC)" LD="$(GTKDOC_LD)" CFLAGS="$(GTKDOC_CFLAGS)" LDFLAGS="$(GTKDOC_LIBS)" gtkdoc-scangobj $(SCANGOBJ_OPTIONS) --module=$(DOC_MODULE) --output-dir=$(srcdir) ; \
	else \
	    cd $(srcdir) ; \
	    for i in $(SCANOBJ_FILES) ; do \
               test -f $$i || touch $$i ; \
	    done \
	fi
	touch scan-build.stamp

$(DOC_MODULE)-decl.txt $(SCANOBJ_FILES) $(DOC_MODULE)-sections.txt $(DOC_MODULE)-overrides.txt: scan-build.stamp
	@true

#### templates ####

tmpl-build.stamp: $(DOC_MODULE)-decl.txt $(SCANOBJ_FILES) $(DOC_MODULE)-sections.txt $(DOC_MODULE)-overrides.txt
	@echo 'gtk-doc: Rebuilding template files'
	@-chmod -R u+w $(srcdir)
	cd $(srcdir) && gtkdoc-mktmpl --module=$(DOC_MODULE) $(MKTMPL_OPTIONS)
	touch tmpl-build.stamp

tmpl.stamp: tmpl-build.stamp
	@true

tmpl/*.sgml:
	@true

#### xml ####

sgml-build.stamp: tmpl.stamp $(HFILE_GLOB) $(CFILE_GLOB) $(DOC_MODULE)-sections.txt $(srcdir)/tmpl/*.sgml $(expand_content_files)
	@echo 'gtk-doc: Building XML'
	@-chmod -R u+w $(srcdir)
	cd $(srcdir) && \
	gtkdoc-mkdb --module=$(DOC_MODULE) --source-dir=$(DOC_SOURCE_DIR) --output-format=xml --expand-content-files="$(expand_content_files)" --main-sgml-file=$(DOC_MAIN_SGML_FILE) $(MKDB_OPTIONS)
	touch sgml-build.stamp

sgml.stamp: sgml-build.stamp
	@true

#### html ####

html-build.stamp: sgml.stamp $(DOC_MAIN_SGML_FILE) $(content_files)
	@echo 'gtk-doc: Building HTML'
	@-chmod -R u+w $(srcdir)
	rm -rf $(srcdir)/html
	mkdir $(srcdir)/html
	cd $(srcdir)/html && gtkdoc-mkhtml $(DOC_MODULE) ../$(DOC_MAIN_SGML_FILE)
	test "x$(HTML_IMAGES)" = "x" || ( cd $(srcdir) && cp $(HTML_IMAGES) html )
	@echo 'gtk-doc: Fixing cross-references'
	cd $(srcdir) && gtkdoc-fixxref --module-dir=html --html-dir=$(HTML_DIR) $(FIXXREF_OPTIONS)
	touch html-build.stamp

##############

clean-local:
	rm -f *~ *.bak
	rm -rf .libs

distclean-local:
	cd $(srcdir) && \
	  rm -rf xml $(REPORT_FILES) \
	         $(DOC_MODULE)-decl-list.txt $(DOC_MODULE)-decl.txt

maintainer-clean-local: clean
	cd $(srcdir) && rm -rf xml html

install-data-local:
	installfiles=`echo $(srcdir)/html/*`; \
	if test "$$installfiles" = '$(srcdir)/html/*'; \
	then echo '-- Nothing to install' ; \
	else \
	  $(mkinstalldirs) $(DESTDIR)$(TARGET_DIR); \
	  for i in $$installfiles; do \
	    echo '-- Installing '$$i ; \
	    $(INSTALL_DATA) $$i $(DESTDIR)$(TARGET_DIR); \
	  done; \
	  echo '-- Installing $(srcdir)/html/index.sgml' ; \
	  $(INSTALL_DATA) $(srcdir)/html/index.sgml $(DESTDIR)$(TARGET_DIR) || :; \
	  if test `which gtkdoc-rebase` != ""; then \
        gtkdoc-rebase --relative --dest-dir=$(DESTDIR) --html-dir=$(DESTDIR)$(TARGET_DIR) ; \
	  fi \
	fi

uninstall-local:
	rm -f $(DESTDIR)$(TARGET_DIR)/*

#
# Require gtk-doc when making dist
#
@ENABLE_GTK_DOC_TRUE@dist-check-gtkdoc:
@ENABLE_GTK_DOC_FALSE@dist-check-gtkdoc:
@ENABLE_GTK_DOC_FALSE@	@echo "*** gtk-doc must be installed and enabled in order to make dist"
@ENABLE_GTK_DOC_FALSE@	@false

dist-hook: dist-check-gtkdoc dist-hook-local
	mkdir $(distdir)/tmpl
	mkdir $(distdir)/xml
	mkdir $(distdir)/html
	-cp $(srcdir)/tmpl/*.sgml $(distdir)/tmpl
	-cp $(srcdir)/xml/*.xml $(distdir)/xml
	cp $(srcdir)/html/* $(distdir)/html
	cp $(srcdir)/$(DOC_MODULE).types $(distdir)/
	cp $(srcdir)/$(DOC_MODULE)-sections.txt $(distdir)/
	cd $(distdir) && rm -f $(DISTCLEANFILES)
	-gtkdoc-rebase --online --relative --html-dir=$(distdir)/html

.PHONY : dist-hook-local docs

@MAINTAINER_MODE_TRUE@libraptor.html: $(srcdir)/libraptor.3 $(srcdir)/../fix-groff-xhtml
@MAINTAINER_MODE_TRUE@	-groff -man -Thtml -P-l $< | tidy -asxml -wrap 1000 2>/dev/null | perl $(srcdir)/../fix-groff-xhtml $@

@MAINTAINER_MODE_TRUE@rdfcat.c: $(srcdir)/../examples/rdfcat.c
@MAINTAINER_MODE_TRUE@	$(install_sh_DATA) $? $@

@MAINTAINER_MODE_TRUE@rdfprint.c: $(srcdir)/../examples/rdfprint.c
@MAINTAINER_MODE_TRUE@	$(install_sh_DATA) $? $@

@MAINTAINER_MODE_TRUE@rdfserialize.c: $(srcdir)/../examples/rdfserialize.c
@MAINTAINER_MODE_TRUE@	$(install_sh_DATA) $? $@

@MAINTAINER_MODE_TRUE@raptor-tutorial-parsing.xml: rdfcat.c

@MAINTAINER_MODE_TRUE@raptor-tutorial-serializing.xml: rdfprint.c rdfserialize.c
# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT: