Innosetup installer updates

Rename usage of outdated Innosetup functions
Configure CMake to use the same build type for Innosetup target
Use Tenacity logos
Update readme information displayed post-install
Update license information displayed pre-install
Fix installer generation
Cleanup innosetup configuration

Signed-off-by: Emily Mabrey <emabrey@tenacityaudio.org>

win/Inno_Setup_Wizard/BuildInnoSetupInstaller.cmake

@@ -4,13 +4,16 @@
 # SOURCE_DIR - should be set to CMAKE_SOURCE_DIR by teh caller
 # OUTPUT_DIR - directory, where installer will be built
 # INNO_SETUP_COMPILER - InnoSetup compiler executable
-# BUILDING_64_BIT - Flag, that indicates that we are building a 64-bit installer
+# IS_64_BIT - Flag, that indicates that we are building a 64-bit installer
 # EMBED_MANUAL - embed a fresh copy of manual
 # SIGN - sign the installer
 # WINDOWS_CERTIFICATE - path to PFX file. If not present, env:WINDOWS_CERTIFICATE will be used
 # WINDOWS_CERTIFICATE_PASSWORD - password for the PFX file. If not present, env:WINDOWS_CERTIFICATE_PASSWORD will be used
 
-if( BUILDING_64_BIT )
+# Allow if statements to use the new IN_LIST operator (compatibility override for CMake <3.3)
+cmake_policy( SET CMP0057 NEW )
+
+if( IS_64_BIT )
     set( INSTALLER_SUFFIX "x64" )
     set( INSTALLER_X64_MODE "ArchitecturesInstallIn64BitMode=x64")
 else()
@@ -48,32 +51,76 @@ configure_file("${OUTPUT_DIR}/tenacity.iss.in" "${OUTPUT_DIR}/tenacity.iss")
 
 file(COPY "${SOURCE_DIR}/presets" DESTINATION "${OUTPUT_DIR}/Additional")
 
-file(COPY 
+file(COPY
         "${SOURCE_DIR}/LICENSE.txt"
-        "${SOURCE_DIR}/README.md"
+        "${SOURCE_DIR}/win/README.rtf"
         "${SOURCE_DIR}/win/tenacity.ico"
-    DESTINATION 
+        "${SOURCE_DIR}/win/darktenacity.ico"
+    DESTINATION
         "${OUTPUT_DIR}/Additional"
 )
 
+if( DEFINED CMAKE_BUILD_TYPE )
+  if( EXISTS "${BUILD_DIR}/bin/${CMAKE_BUILD_TYPE}" )
+    # Use CMAKE_BUILD_TYPE value if defined and previously built
+    set( INNOSETUP_BUILD_CONFIGURATIONS "${CMAKE_BUILD_TYPE};" )
+  else()
+    message( FATAL_ERROR "You defined a value for CMAKE_BUILD_TYPE which has not already been built, please build it and try again" )
+  endif()
+elseif( DEFINED CMAKE_INSTALL_CONFIG_NAME )
+  if( EXISTS "${BUILD_DIR}/bin/${CMAKE_INSTALL_CONFIG_NAME}" )
+    # Use install --config value if defined and previously built
+    set( INNOSETUP_BUILD_CONFIGURATIONS "${CMAKE_INSTALL_CONFIG_NAME};" )
+  else()
+    message( FATAL_ERROR "You defined a value for CMAKE_INSTALL_CONFIG_NAME which has not already been built, please build it and try again" )
+  endif()
+else()
+  # These are listed in order of preference in case more than one of them are built
+  # It must include all four configurations for this to work correctly on multi-config
+  set( INNOSETUP_BUILD_CONFIGURATIONS "MinSizeRel;Release;RelWithDebInfo;Debug" )
+  message( STATUS "You did not define a build type manually so we will attempt to find build types in this order: ${INNOSETUP_BUILD_CONFIGURATIONS}" )
+endif()
+
 # "Install" prebuilt package
 
-execute_process(
-    COMMAND 
-        ${CMAKE_COMMAND}
-            --install ${BUILD_DIR}
-            --prefix "${OUTPUT_DIR}/Package"
-)
+set( VALID_BUILD_TYPE_FOUND FALSE )
+foreach( config ${INNOSETUP_BUILD_CONFIGURATIONS} )
+  file( GLOB VALID_BUILD
+          "${BUILD_DIR}/bin/${config}/Tenacity" "${BUILD_DIR}/bin/${config}/Tenacity.*"
+          "${BUILD_DIR}/bin/${config}/tenacity" "${BUILD_DIR}/bin/${config}/tenacity.*"
+  )
+  if( VALID_BUILD )
+    message ( STATUS "Using build type ${config} to create innosetup installer" )
+    execute_process(
+      COMMAND
+          ${CMAKE_COMMAND}
+              --install ${BUILD_DIR}
+              --prefix "${OUTPUT_DIR}/Package"
+              --config ${config}
+              # When we upgrade to CMake min version 3.19 we can use this
+              # COMMAND_ERROR_IS_FATAL ANY
+    )
+    set( VALID_BUILD_TYPE_FOUND TRUE FORCE )
+    set( VALID_BUILD_TYPE ${config} )
+    break()
+  endif()
+endforeach()
 
-# Build the installer
+if( NOT VALID_BUILD_TYPE_FOUND )
+  message( FATAL_ERROR "You must build the project successfully before building the innosetup target" )
+endif()
 
 execute_process(
     COMMAND
-        ${INNO_SETUP_COMPILER} /Sbyparam=$p "tenacity.iss"
+        ${INNO_SETUP_COMPILER} /Sbyparam=$p "tenacity.iss" /Qp
     WORKING_DIRECTORY
         ${OUTPUT_DIR}
+    # When we upgrade to CMake min version 3.19 we can use this
+    # COMMAND_ERROR_IS_FATAL ANY
 )
 
-# Emulate CPack behavior
+# If we enable COMMAND_ERROR_IS_FATAL then if we reach here we are sure we successfully created the installer
+# message ( STATUS "Successfully created innosetup installer using build type ${VALID_BUILD_TYPE}" )
 
+# Emulate CPack behavior
 file( COPY "${OUTPUT_DIR}/Output/" DESTINATION "${BUILD_DIR}/package" )

win/Inno_Setup_Wizard/tenacity.iss.in

@@ -3,81 +3,71 @@
 ;   License: GPL v2.  See License.txt.
 ;
 ;   tenacity.iss
-;   Vaughan Johnson, Leland Lucius, Martyn Shaw, Richard Ash, & others
-;
 
-; This requires that the ISS Preprocessor be installed
-
-#define AppExe "Package\tenacity.exe" 
+#define AppExe "Package\tenacity.exe"
 #define AppMajor ""
 #define AppMinor ""
 #define AppRev ""
 #define AppBuild ""
-#define FullVersion ParseVersion(AppExe, AppMajor, AppMinor, AppRev, AppBuild)
+#define FullVersion GetVersionComponents(AppExe, AppMajor, AppMinor, AppRev, AppBuild)
 #define AppVersion Str(AppMajor) + "." + Str(AppMinor) + "." + Str(AppRev)
 #define AppName GetStringFileInfo(AppExe, PRODUCT_NAME)
 
 [UninstallRun]
 ; Uninstall prior installations.
-Filename: "{app}\unins*.*"; 
+Filename: "{app}\unins*.*"; RunOnceId: "UninstallPrior"
 
 [Setup]
-; compiler-related directives
-OutputBaseFilename=tenacity-win-{#AppVersion}-@INSTALLER_SUFFIX@
-
-; Use 100% images by default
+; Icons
+SetupIconFile="Additional\tenacity.ico"
+UninstallDisplayIcon="{app}\tenacity.exe"
 WizardImageFile=".\tenacity_InnoWizardImage_100.bmp"
 WizardSmallImageFile=".\tenacity_InnoWizardSmallImage_100.bmp"
 
-SolidCompression=yes
-
-; installer-related directives
-; From Inno 5.5.7, Inno defaults to disabling the Welcome page as recommended 
-; by Microsoft's desktop applications guideline, but we don't want to do that.
-DisableWelcomePage=no
-
+; App/Version information
 AppName={#AppName}
 AppVerName=Tenacity {#AppVersion}
-; Specify AppVersion as well, so it appears in the Add/Remove Programs entry. 
 AppVersion={#AppVersion}
 AppPublisher="Tenacity Team"
 AppPublisherURL=https://tenacityaudio.org/
 AppSupportURL=https://tenacityaudio.org/
 AppUpdatesURL=https://tenacityaudio.org/
-ChangesAssociations=yes
-@INSTALLER_X64_MODE@
-
-DefaultDirName={commonpf}\Tenacity
-
 VersionInfoProductName={#AppName}
 VersionInfoProductTextVersion={#GetFileProductVersion(AppExe)}
 VersionInfoDescription={#AppName + " " + AppVersion + " Setup"}
-VersionInfoVersion={#GetFileVersion(AppExe)}
+VersionInfoVersion={#GetVersionNumbersString(AppExe)}
 VersionInfoCopyright={#GetFileCopyright(AppExe)}
 
-; Don't disable the "Select Destination Location" wizard, even if 
+; Default install location
+DefaultDirName={commonpf}\Tenacity
+
+; Tells explorer to refresh file assocations to pickup any changes
+ChangesAssociations=yes
+
+; Does package->compress instead of compress->package
+SolidCompression=yes
+
+; Don't disable the "Select Destination Location" wizard, even if
 ; Tenacity is already installed.
 DisableDirPage=no
 
 ; Always warn if dir exists, because we'll overwrite previous Tenacity.
 DirExistsWarning=yes
 DisableProgramGroupPage=yes
-UninstallDisplayIcon="{app}\tenacity.exe"
 
-; No longer force them to accept the license, just display it.   LicenseFile=..\LICENSE.txt
+; Always show welcome page
+DisableWelcomePage=no
+
+; Display license information before install
 InfoBeforeFile=".\tenacity_InnoWizard_InfoBefore.rtf"
-InfoAfterFile=Additional\README.md
 
-; We no longer produce new ANSI builds. 
-; As we use Inno Setup (u), the Unicode version, to build this script, 
-; the MinVersion will automatically be set to what we need. 
-; We no longer explicitly set it.
-;   MinVersion=4.0,5.0
-
-; cosmetic-related directives
-SetupIconFile="Additional\tenacity.ico"
+; Display README after install
+InfoAfterFile=Additional\README.rtf
 
+; Directives using information passed by CMake
+@INSTALLER_X64_MODE@
 @SIGN_TOOL@
+OutputBaseFilename=tenacity-win-{#AppVersion}-@INSTALLER_SUFFIX@
 
 [INI]
 Filename: "{app}\FirstTime.ini"; Section: "FromInno"; Key: "ResetPrefs"; String: "1"; Tasks: resetPrefs;
@@ -93,8 +83,8 @@ Name: resetPrefs; Description:  "{cm:ResetPrefs}"; Flags: unchecked
 ; Prime the first time .ini file so the permissions can be set
 Source: ".\FirstTimeModel.ini"; DestDir: "{app}"; DestName: "FirstTime.ini"; Permissions: users-modify
 
-; Don't display in separate window, rather as InfoAfterFile.   Source: "..\README.md"; DestDir: "{app}"; Flags: ignoreversion isreadme
-Source: "Additional\README.md"; DestDir: "{app}"; Flags: ignoreversion
+; Manually create RTF version of README
+Source: "Additional\README.rtf"; DestDir: "{app}"; Flags: ignoreversion
 
 Source: "Additional\LICENSE.txt"; DestDir: "{app}"; Flags: ignoreversion
 Source: "{#AppExe}"; DestDir: "{app}"; Flags: ignoreversion
@@ -150,7 +140,7 @@ end;
 procedure InitializeWizard;
 begin
   { If using larger scaling, load the correct size of images }
-  if GetScalingFactor > 100 then 
+  if GetScalingFactor > 100 then
   begin
     LoadEmbededScaledBitmap(WizardForm.WizardBitmapImage, 'tenacity_InnoWizardImage');
     LoadEmbededScaledBitmap(WizardForm.WizardBitmapImage2, 'tenacity_InnoWizardImage');
@@ -163,32 +153,31 @@ Name: "{commonprograms}\Tenacity"; Filename: "{app}\tenacity.exe"
 Name: "{commondesktop}\Tenacity"; Filename: "{app}\tenacity.exe"; Tasks: desktopicon
 
 [InstallDelete]
-; Get rid of Tenacity 1.0.0 stuff that's no longer used.
-Type: files; Name: "{app}\tenacity-help.htb"
-Type: files; Name: "{app}\tenacity-1.2-help.htb"
 
-; Get rid of previous versions of MSVC runtimes.
+; Get rid of previous versions of MSVC runtimes
+; Currently MSVC runtime versions 8, 9, 10, 11, 12, 13
 Type: files; Name: "{app}\Microsoft.VC80.CRT.manifest"
-Type: files; Name: "{app}\Microsoft.VC90.CRT.manifest"
 Type: files; Name: "{app}\msvcp80.dll"
 Type: files; Name: "{app}\msvcr80.dll"
+Type: files; Name: "{app}\Microsoft.VC90.CRT.manifest"
 Type: files; Name: "{app}\msvcp90.dll"
 Type: files; Name: "{app}\msvcr90.dll"
+Type: files; Name: "{app}\Microsoft.VC100.CRT.manifest"
+Type: files; Name: "{app}\msvcp100.dll"
+Type: files; Name: "{app}\msvcr100.dll"
+Type: files; Name: "{app}\Microsoft.VC110.CRT.manifest"
+Type: files; Name: "{app}\msvcp110.dll"
+Type: files; Name: "{app}\msvcr110.dll"
+Type: files; Name: "{app}\Microsoft.VC120.CRT.manifest"
 Type: files; Name: "{app}\msvcp120.dll"
 Type: files; Name: "{app}\msvcr120.dll"
+Type: files; Name: "{app}\Microsoft.VC130.CRT.manifest"
+Type: files; Name: "{app}\msvcp130.dll"
+Type: files; Name: "{app}\msvcr130.dll"
 
 ; Get rid of previous help folder.
 Type: filesandordirs; Name: "{app}\help"
 
-; Don't want to do this because user may have stored their own.
-;   Type: filesandordirs; Name: "{app}\vst"
-
-; We've switched from a folder in the start menu to just the Tenacity.exe at the top level.
-; Get rid of 1.0.0 folder and its icons.
-Type: files; Name: "{commonprograms}\Tenacity\tenacity.exe"
-Type: files; Name: "{commonprograms}\Tenacity\unins000.exe"
-Type: dirifempty; Name: "{commonprograms}\Tenacity"
-
 ;Get rid of previous uninstall item
 Type: files; Name: "{app}\unins*.*"
 
@@ -217,7 +206,7 @@ Type: files; Name: "{app}\Plug-Ins\gverb_1216.dll"
 Type: files; Name: "{app}\Plug-Ins\crossfadein.ny"
 Type: files; Name: "{app}\Plug-Ins\crossfadeout.ny"
 Type: files; Name: "{app}\Plug-Ins\clicktrack.ny"
-                                            
+
 [Registry]
 ; No longer allow user to choose whether to associate AUP file type with Tenacity.
 ; Leaving this one commented out example of the old way.
@@ -248,7 +237,7 @@ Filename: "{app}\tenacity.exe"; Description: "{cm:LaunchProgram,Tenacity}"; Flag
 ; http://www.jrsoftware.org/files/istrans/
 ;
 ; Set this to the base of the unofficial  Inno Setup translations
-#define UrlBase "http://raw.github.com/jrsoftware/issrc/master/Files/Languages/Unofficial/"
+#define UrlBase "https://raw.githubusercontent.com/jrsoftware/issrc/main/Files/Languages/Unofficial/"
 
 ; This macro will use the Windows PowerShell to download the given translation into
 ; the Inno Setup Languages folder if it hasn't already been downloaded.