Autres/audacity
1
0
Fork 0
mirror of https://github.com/cookiengineer/audacity synced 2026-03-04 21:50:51 +01:00
Code Issues Releases Wiki Activity

Reverting r12850...hopefully

Browse Source 
Never removed one before, but I'm pretty sure it is correct.
This commit is contained in:
lllucius
2013-11-03 01:54:50 +00:00
parent a68955a0dd
commit b4ba110811
360 changed files with 62988 additions and 62988 deletions
Download Patch File Download Diff File Expand all files Collapse all files

740
lib-src/soundtouch/source/SoundTouch/BPMDetect.cpp
View File

@@ -1,370 +1,370 @@
////////////////////////////////////////////////////////////////////////////////
///
/// Beats-per-minute (BPM) detection routine.
///
/// The beat detection algorithm works as follows:
/// - Use function 'inputSamples' to input a chunks of samples to the class for
/// analysis. It's a good idea to enter a large sound file or stream in smallish
/// chunks of around few kilosamples in order not to extinguish too much RAM memory.
/// - Inputted sound data is decimated to approx 500 Hz to reduce calculation burden,
/// which is basically ok as low (bass) frequencies mostly determine the beat rate.
/// Simple averaging is used for anti-alias filtering because the resulting signal
/// quality isn't of that high importance.
/// - Decimated sound data is enveloped, i.e. the amplitude shape is detected by
/// taking absolute value that's smoothed by sliding average. Signal levels that
/// are below a couple of times the general RMS amplitude level are cut away to
/// leave only notable peaks there.
/// - Repeating sound patterns (e.g. beats) are detected by calculating short-term
/// autocorrelation function of the enveloped signal.
/// - After whole sound data file has been analyzed as above, the bpm level is
/// detected by function 'getBpm' that finds the highest peak of the autocorrelation
/// function, calculates it's precise location and converts this reading to bpm's.
///
/// Author : Copyright (c) Olli Parviainen
/// Author e-mail : oparviai 'at' iki.fi
/// SoundTouch WWW: http://www.surina.net/soundtouch
///
////////////////////////////////////////////////////////////////////////////////
//
// Last changed : $Date: 2012-08-30 22:45:25 +0300 (Thu, 30 Aug 2012) $
// File revision : $Revision: 4 $
//
// $Id: BPMDetect.cpp 149 2012-08-30 19:45:25Z oparviai $
//
////////////////////////////////////////////////////////////////////////////////
//
// License :
//
// SoundTouch audio processing library
// Copyright (c) Olli Parviainen
//
// This library is free software; you can redistribute it and/or
// modify it under the terms of the GNU Lesser General Public
// License as published by the Free Software Foundation; either
// version 2.1 of the License, or (at your option) any later version.
//
// This library is distributed in the hope that it will be useful,
// but WITHOUT ANY WARRANTY; without even the implied warranty of
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
// Lesser General Public License for more details.
//
// You should have received a copy of the GNU Lesser General Public
// License along with this library; if not, write to the Free Software
// Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
//
////////////////////////////////////////////////////////////////////////////////
#include <math.h>
#include <assert.h>
#include <string.h>
#include <stdio.h>
#include "FIFOSampleBuffer.h"
#include "PeakFinder.h"
#include "BPMDetect.h"
using namespace soundtouch;
#define INPUT_BLOCK_SAMPLES 2048
#define DECIMATED_BLOCK_SAMPLES 256
/// decay constant for calculating RMS volume sliding average approximation
/// (time constant is about 10 sec)
const float avgdecay = 0.99986f;
/// Normalization coefficient for calculating RMS sliding average approximation.
const float avgnorm = (1 - avgdecay);
////////////////////////////////////////////////////////////////////////////////
// Enable following define to create bpm analysis file:
// #define _CREATE_BPM_DEBUG_FILE
#ifdef _CREATE_BPM_DEBUG_FILE
#define DEBUGFILE_NAME "c:\\temp\\soundtouch-bpm-debug.txt"
static void _SaveDebugData(const float *data, int minpos, int maxpos, double coeff)
{
FILE *fptr = fopen(DEBUGFILE_NAME, "wt");
int i;
if (fptr)
{
printf("\n\nWriting BPM debug data into file " DEBUGFILE_NAME "\n\n");
for (i = minpos; i < maxpos; i ++)
{
fprintf(fptr, "%d\t%.1lf\t%f\n", i, coeff / (double)i, data[i]);
}
fclose(fptr);
}
}
#else
#define _SaveDebugData(a,b,c,d)
#endif
////////////////////////////////////////////////////////////////////////////////
BPMDetect::BPMDetect(int numChannels, int aSampleRate)
{
this->sampleRate = aSampleRate;
this->channels = numChannels;
decimateSum = 0;
decimateCount = 0;
envelopeAccu = 0;
// Initialize RMS volume accumulator to RMS level of 1500 (out of 32768) that's
// safe initial RMS signal level value for song data. This value is then adapted
// to the actual level during processing.
#ifdef SOUNDTOUCH_INTEGER_SAMPLES
// integer samples
RMSVolumeAccu = (1500 * 1500) / avgnorm;
#else
// float samples, scaled to range [-1..+1[
RMSVolumeAccu = (0.045f * 0.045f) / avgnorm;
#endif
// choose decimation factor so that result is approx. 1000 Hz
decimateBy = sampleRate / 1000;
assert(decimateBy > 0);
assert(INPUT_BLOCK_SAMPLES < decimateBy * DECIMATED_BLOCK_SAMPLES);
// Calculate window length & starting item according to desired min & max bpms
windowLen = (60 * sampleRate) / (decimateBy * MIN_BPM);
windowStart = (60 * sampleRate) / (decimateBy * MAX_BPM);
assert(windowLen > windowStart);
// allocate new working objects
xcorr = new float[windowLen];
memset(xcorr, 0, windowLen * sizeof(float));
// allocate processing buffer
buffer = new FIFOSampleBuffer();
// we do processing in mono mode
buffer->setChannels(1);
buffer->clear();
}
BPMDetect::~BPMDetect()
{
delete[] xcorr;
delete buffer;
}
/// convert to mono, low-pass filter & decimate to about 500 Hz.
/// return number of outputted samples.
///
/// Decimation is used to remove the unnecessary frequencies and thus to reduce
/// the amount of data needed to be processed as calculating autocorrelation
/// function is a very-very heavy operation.
///
/// Anti-alias filtering is done simply by averaging the samples. This is really a
/// poor-man's anti-alias filtering, but it's not so critical in this kind of application
/// (it'd also be difficult to design a high-quality filter with steep cut-off at very
/// narrow band)
int BPMDetect::decimate(SAMPLETYPE *dest, const SAMPLETYPE *src, int numsamples)
{
int count, outcount;
LONG_SAMPLETYPE out;
assert(channels > 0);
assert(decimateBy > 0);
outcount = 0;
for (count = 0; count < numsamples; count ++)
{
int j;
// convert to mono and accumulate
for (j = 0; j < channels; j ++)
{
decimateSum += src[j];
}
src += j;
decimateCount ++;
if (decimateCount >= decimateBy)
{
// Store every Nth sample only
out = (LONG_SAMPLETYPE)(decimateSum / (decimateBy * channels));
decimateSum = 0;
decimateCount = 0;
#ifdef SOUNDTOUCH_INTEGER_SAMPLES
// check ranges for sure (shouldn't actually be necessary)
if (out > 32767)
{
out = 32767;
}
else if (out < -32768)
{
out = -32768;
}
#endif // SOUNDTOUCH_INTEGER_SAMPLES
dest[outcount] = (SAMPLETYPE)out;
outcount ++;
}
}
return outcount;
}
// Calculates autocorrelation function of the sample history buffer
void BPMDetect::updateXCorr(int process_samples)
{
int offs;
SAMPLETYPE *pBuffer;
assert(buffer->numSamples() >= (uint)(process_samples + windowLen));
pBuffer = buffer->ptrBegin();
for (offs = windowStart; offs < windowLen; offs ++)
{
LONG_SAMPLETYPE sum;
int i;
sum = 0;
for (i = 0; i < process_samples; i ++)
{
sum += pBuffer[i] * pBuffer[i + offs]; // scaling the sub-result shouldn't be necessary
}
// xcorr[offs] *= xcorr_decay; // decay 'xcorr' here with suitable coefficients
// if it's desired that the system adapts automatically to
// various bpms, e.g. in processing continouos music stream.
// The 'xcorr_decay' should be a value that's smaller than but
// close to one, and should also depend on 'process_samples' value.
xcorr[offs] += (float)sum;
}
}
// Calculates envelope of the sample data
void BPMDetect::calcEnvelope(SAMPLETYPE *samples, int numsamples)
{
const static double decay = 0.7f; // decay constant for smoothing the envelope
const static double norm = (1 - decay);
int i;
LONG_SAMPLETYPE out;
double val;
for (i = 0; i < numsamples; i ++)
{
// calc average RMS volume
RMSVolumeAccu *= avgdecay;
val = (float)fabs((float)samples[i]);
RMSVolumeAccu += val * val;
// cut amplitudes that are below cutoff ~2 times RMS volume
// (we're interested in peak values, not the silent moments)
if (val < 0.5 * sqrt(RMSVolumeAccu * avgnorm))
{
val = 0;
}
// smooth amplitude envelope
envelopeAccu *= decay;
envelopeAccu += val;
out = (LONG_SAMPLETYPE)(envelopeAccu * norm);
#ifdef SOUNDTOUCH_INTEGER_SAMPLES
// cut peaks (shouldn't be necessary though)
if (out > 32767) out = 32767;
#endif // SOUNDTOUCH_INTEGER_SAMPLES
samples[i] = (SAMPLETYPE)out;
}
}
void BPMDetect::inputSamples(const SAMPLETYPE *samples, int numSamples)
{
SAMPLETYPE decimated[DECIMATED_BLOCK_SAMPLES];
// iterate so that max INPUT_BLOCK_SAMPLES processed per iteration
while (numSamples > 0)
{
int block;
int decSamples;
block = (numSamples > INPUT_BLOCK_SAMPLES) ? INPUT_BLOCK_SAMPLES : numSamples;
// decimate. note that converts to mono at the same time
decSamples = decimate(decimated, samples, block);
samples += block * channels;
numSamples -= block;
// envelope new samples and add them to buffer
calcEnvelope(decimated, decSamples);
buffer->putSamples(decimated, decSamples);
}
// when the buffer has enought samples for processing...
if ((int)buffer->numSamples() > windowLen)
{
int processLength;
// how many samples are processed
processLength = (int)buffer->numSamples() - windowLen;
// ... calculate autocorrelations for oldest samples...
updateXCorr(processLength);
// ... and remove them from the buffer
buffer->receiveSamples(processLength);
}
}
void BPMDetect::removeBias()
{
int i;
float minval = 1e12f; // arbitrary large number
for (i = windowStart; i < windowLen; i ++)
{
if (xcorr[i] < minval)
{
minval = xcorr[i];
}
}
for (i = windowStart; i < windowLen; i ++)
{
xcorr[i] -= minval;
}
}
float BPMDetect::getBpm()
{
double peakPos;
double coeff;
PeakFinder peakFinder;
coeff = 60.0 * ((double)sampleRate / (double)decimateBy);
// save bpm debug analysis data if debug data enabled
_SaveDebugData(xcorr, windowStart, windowLen, coeff);
// remove bias from xcorr data
removeBias();
// find peak position
peakPos = peakFinder.detectPeak(xcorr, windowStart, windowLen);
assert(decimateBy != 0);
if (peakPos < 1e-9) return 0.0; // detection failed.
// calculate BPM
return (float) (coeff / peakPos);
}
////////////////////////////////////////////////////////////////////////////////
///
/// Beats-per-minute (BPM) detection routine.
///
/// The beat detection algorithm works as follows:
/// - Use function 'inputSamples' to input a chunks of samples to the class for
/// analysis. It's a good idea to enter a large sound file or stream in smallish
/// chunks of around few kilosamples in order not to extinguish too much RAM memory.
/// - Inputted sound data is decimated to approx 500 Hz to reduce calculation burden,
/// which is basically ok as low (bass) frequencies mostly determine the beat rate.
/// Simple averaging is used for anti-alias filtering because the resulting signal
/// quality isn't of that high importance.
/// - Decimated sound data is enveloped, i.e. the amplitude shape is detected by
/// taking absolute value that's smoothed by sliding average. Signal levels that
/// are below a couple of times the general RMS amplitude level are cut away to
/// leave only notable peaks there.
/// - Repeating sound patterns (e.g. beats) are detected by calculating short-term
/// autocorrelation function of the enveloped signal.
/// - After whole sound data file has been analyzed as above, the bpm level is
/// detected by function 'getBpm' that finds the highest peak of the autocorrelation
/// function, calculates it's precise location and converts this reading to bpm's.
///
/// Author : Copyright (c) Olli Parviainen
/// Author e-mail : oparviai 'at' iki.fi
/// SoundTouch WWW: http://www.surina.net/soundtouch
///
////////////////////////////////////////////////////////////////////////////////
//
// Last changed : $Date: 2012-08-30 22:45:25 +0300 (Thu, 30 Aug 2012) $
// File revision : $Revision: 4 $
//
// $Id: BPMDetect.cpp 149 2012-08-30 19:45:25Z oparviai $
//
////////////////////////////////////////////////////////////////////////////////
//
// License :
//
// SoundTouch audio processing library
// Copyright (c) Olli Parviainen
//
// This library is free software; you can redistribute it and/or
// modify it under the terms of the GNU Lesser General Public
// License as published by the Free Software Foundation; either
// version 2.1 of the License, or (at your option) any later version.
//
// This library is distributed in the hope that it will be useful,
// but WITHOUT ANY WARRANTY; without even the implied warranty of
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
// Lesser General Public License for more details.
//
// You should have received a copy of the GNU Lesser General Public
// License along with this library; if not, write to the Free Software
// Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
//
////////////////////////////////////////////////////////////////////////////////
#include <math.h>
#include <assert.h>
#include <string.h>
#include <stdio.h>
#include "FIFOSampleBuffer.h"
#include "PeakFinder.h"
#include "BPMDetect.h"
using namespace soundtouch;
#define INPUT_BLOCK_SAMPLES 2048
#define DECIMATED_BLOCK_SAMPLES 256
/// decay constant for calculating RMS volume sliding average approximation
/// (time constant is about 10 sec)
const float avgdecay = 0.99986f;
/// Normalization coefficient for calculating RMS sliding average approximation.
const float avgnorm = (1 - avgdecay);
////////////////////////////////////////////////////////////////////////////////
// Enable following define to create bpm analysis file:
// #define _CREATE_BPM_DEBUG_FILE
#ifdef _CREATE_BPM_DEBUG_FILE
#define DEBUGFILE_NAME "c:\\temp\\soundtouch-bpm-debug.txt"
static void _SaveDebugData(const float *data, int minpos, int maxpos, double coeff)
{
FILE *fptr = fopen(DEBUGFILE_NAME, "wt");
int i;
if (fptr)
{
printf("\n\nWriting BPM debug data into file " DEBUGFILE_NAME "\n\n");
for (i = minpos; i < maxpos; i ++)
{
fprintf(fptr, "%d\t%.1lf\t%f\n", i, coeff / (double)i, data[i]);
}
fclose(fptr);
}
}
#else
#define _SaveDebugData(a,b,c,d)
#endif
////////////////////////////////////////////////////////////////////////////////
BPMDetect::BPMDetect(int numChannels, int aSampleRate)
{
this->sampleRate = aSampleRate;
this->channels = numChannels;
decimateSum = 0;
decimateCount = 0;
envelopeAccu = 0;
// Initialize RMS volume accumulator to RMS level of 1500 (out of 32768) that's
// safe initial RMS signal level value for song data. This value is then adapted
// to the actual level during processing.
#ifdef SOUNDTOUCH_INTEGER_SAMPLES
// integer samples
RMSVolumeAccu = (1500 * 1500) / avgnorm;
#else
// float samples, scaled to range [-1..+1[
RMSVolumeAccu = (0.045f * 0.045f) / avgnorm;
#endif
// choose decimation factor so that result is approx. 1000 Hz
decimateBy = sampleRate / 1000;
assert(decimateBy > 0);
assert(INPUT_BLOCK_SAMPLES < decimateBy * DECIMATED_BLOCK_SAMPLES);
// Calculate window length & starting item according to desired min & max bpms
windowLen = (60 * sampleRate) / (decimateBy * MIN_BPM);
windowStart = (60 * sampleRate) / (decimateBy * MAX_BPM);
assert(windowLen > windowStart);
// allocate new working objects
xcorr = new float[windowLen];
memset(xcorr, 0, windowLen * sizeof(float));
// allocate processing buffer
buffer = new FIFOSampleBuffer();
// we do processing in mono mode
buffer->setChannels(1);
buffer->clear();
}
BPMDetect::~BPMDetect()
{
delete[] xcorr;
delete buffer;
}
/// convert to mono, low-pass filter & decimate to about 500 Hz.
/// return number of outputted samples.
///
/// Decimation is used to remove the unnecessary frequencies and thus to reduce
/// the amount of data needed to be processed as calculating autocorrelation
/// function is a very-very heavy operation.
///
/// Anti-alias filtering is done simply by averaging the samples. This is really a
/// poor-man's anti-alias filtering, but it's not so critical in this kind of application
/// (it'd also be difficult to design a high-quality filter with steep cut-off at very
/// narrow band)
int BPMDetect::decimate(SAMPLETYPE *dest, const SAMPLETYPE *src, int numsamples)
{
int count, outcount;
LONG_SAMPLETYPE out;
assert(channels > 0);
assert(decimateBy > 0);
outcount = 0;
for (count = 0; count < numsamples; count ++)
{
int j;
// convert to mono and accumulate
for (j = 0; j < channels; j ++)
{
decimateSum += src[j];
}
src += j;
decimateCount ++;
if (decimateCount >= decimateBy)
{
// Store every Nth sample only
out = (LONG_SAMPLETYPE)(decimateSum / (decimateBy * channels));
decimateSum = 0;
decimateCount = 0;
#ifdef SOUNDTOUCH_INTEGER_SAMPLES
// check ranges for sure (shouldn't actually be necessary)
if (out > 32767)
{
out = 32767;
}
else if (out < -32768)
{
out = -32768;
}
#endif // SOUNDTOUCH_INTEGER_SAMPLES
dest[outcount] = (SAMPLETYPE)out;
outcount ++;
}
}
return outcount;
}
// Calculates autocorrelation function of the sample history buffer
void BPMDetect::updateXCorr(int process_samples)
{
int offs;
SAMPLETYPE *pBuffer;
assert(buffer->numSamples() >= (uint)(process_samples + windowLen));
pBuffer = buffer->ptrBegin();
for (offs = windowStart; offs < windowLen; offs ++)
{
LONG_SAMPLETYPE sum;
int i;
sum = 0;
for (i = 0; i < process_samples; i ++)
{
sum += pBuffer[i] * pBuffer[i + offs]; // scaling the sub-result shouldn't be necessary
}
// xcorr[offs] *= xcorr_decay; // decay 'xcorr' here with suitable coefficients
// if it's desired that the system adapts automatically to
// various bpms, e.g. in processing continouos music stream.
// The 'xcorr_decay' should be a value that's smaller than but
// close to one, and should also depend on 'process_samples' value.
xcorr[offs] += (float)sum;
}
}
// Calculates envelope of the sample data
void BPMDetect::calcEnvelope(SAMPLETYPE *samples, int numsamples)
{
const static double decay = 0.7f; // decay constant for smoothing the envelope
const static double norm = (1 - decay);
int i;
LONG_SAMPLETYPE out;
double val;
for (i = 0; i < numsamples; i ++)
{
// calc average RMS volume
RMSVolumeAccu *= avgdecay;
val = (float)fabs((float)samples[i]);
RMSVolumeAccu += val * val;
// cut amplitudes that are below cutoff ~2 times RMS volume
// (we're interested in peak values, not the silent moments)
if (val < 0.5 * sqrt(RMSVolumeAccu * avgnorm))
{
val = 0;
}
// smooth amplitude envelope
envelopeAccu *= decay;
envelopeAccu += val;
out = (LONG_SAMPLETYPE)(envelopeAccu * norm);
#ifdef SOUNDTOUCH_INTEGER_SAMPLES
// cut peaks (shouldn't be necessary though)
if (out > 32767) out = 32767;
#endif // SOUNDTOUCH_INTEGER_SAMPLES
samples[i] = (SAMPLETYPE)out;
}
}
void BPMDetect::inputSamples(const SAMPLETYPE *samples, int numSamples)
{
SAMPLETYPE decimated[DECIMATED_BLOCK_SAMPLES];
// iterate so that max INPUT_BLOCK_SAMPLES processed per iteration
while (numSamples > 0)
{
int block;
int decSamples;
block = (numSamples > INPUT_BLOCK_SAMPLES) ? INPUT_BLOCK_SAMPLES : numSamples;
// decimate. note that converts to mono at the same time
decSamples = decimate(decimated, samples, block);
samples += block * channels;
numSamples -= block;
// envelope new samples and add them to buffer
calcEnvelope(decimated, decSamples);
buffer->putSamples(decimated, decSamples);
}
// when the buffer has enought samples for processing...
if ((int)buffer->numSamples() > windowLen)
{
int processLength;
// how many samples are processed
processLength = (int)buffer->numSamples() - windowLen;
// ... calculate autocorrelations for oldest samples...
updateXCorr(processLength);
// ... and remove them from the buffer
buffer->receiveSamples(processLength);
}
}
void BPMDetect::removeBias()
{
int i;
float minval = 1e12f; // arbitrary large number
for (i = windowStart; i < windowLen; i ++)
{
if (xcorr[i] < minval)
{
minval = xcorr[i];
}
}
for (i = windowStart; i < windowLen; i ++)
{
xcorr[i] -= minval;
}
}
float BPMDetect::getBpm()
{
double peakPos;
double coeff;
PeakFinder peakFinder;
coeff = 60.0 * ((double)sampleRate / (double)decimateBy);
// save bpm debug analysis data if debug data enabled
_SaveDebugData(xcorr, windowStart, windowLen, coeff);
// remove bias from xcorr data
removeBias();
// find peak position
peakPos = peakFinder.detectPeak(xcorr, windowStart, windowLen);
assert(decimateBy != 0);
if (peakPos < 1e-9) return 0.0; // detection failed.
// calculate BPM
return (float) (coeff / peakPos);
}

142
lib-src/soundtouch/source/SoundTouch/Makefile.am
View File

@@ -1,71 +1,71 @@
## Process this file with automake to create Makefile.in
##
## $Id: Makefile.am 138 2012-04-01 20:00:09Z oparviai $
##
## This file is part of SoundTouch, an audio processing library for pitch/time adjustments
##
## SoundTouch is free software; you can redistribute it and/or modify it under the
## terms of the GNU General Public License as published by the Free Software
## Foundation; either version 2 of the License, or (at your option) any later
## version.
##
## SoundTouch is distributed in the hope that it will be useful, but WITHOUT ANY
## WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR
## A PARTICULAR PURPOSE. See the GNU General Public License for more details.
##
## You should have received a copy of the GNU General Public License along with
## this program; if not, write to the Free Software Foundation, Inc., 59 Temple
## Place - Suite 330, Boston, MA 02111-1307, USA
include $(top_srcdir)/config/am_include.mk
# set to something if you want other stuff to be included in the distribution tarball
EXTRA_DIST=SoundTouch.dsp SoundTouch.dsw SoundTouch.sln SoundTouch.vcproj
noinst_HEADERS=AAFilter.h cpu_detect.h cpu_detect_x86.cpp FIRFilter.h RateTransposer.h TDStretch.h PeakFinder.h
lib_LTLIBRARIES=libSoundTouch.la
#
libSoundTouch_la_SOURCES=AAFilter.cpp FIRFilter.cpp FIFOSampleBuffer.cpp RateTransposer.cpp SoundTouch.cpp TDStretch.cpp cpu_detect_x86.cpp BPMDetect.cpp PeakFinder.cpp
# Compiler flags
AM_CXXFLAGS=-O3 -fcheck-new -I../../include
# Compile the files that need MMX and SSE individually.
libSoundTouch_la_LIBADD=libSoundTouchMMX.la libSoundTouchSSE.la
noinst_LTLIBRARIES=libSoundTouchMMX.la libSoundTouchSSE.la
libSoundTouchMMX_la_SOURCES=mmx_optimized.cpp
libSoundTouchSSE_la_SOURCES=sse_optimized.cpp
# We enable optimizations by default.
# If MMX is supported compile with -mmmx.
# Do not assume -msse is also supported.
if HAVE_MMX
libSoundTouchMMX_la_CXXFLAGS = -mmmx $(AM_CXXFLAGS)
else
libSoundTouchMMX_la_CXXFLAGS = $(AM_CXXFLAGS)
endif
# We enable optimizations by default.
# If SSE is supported compile with -msse.
if HAVE_SSE
libSoundTouchSSE_la_CXXFLAGS = -msse $(AM_CXXFLAGS)
else
libSoundTouchSSE_la_CXXFLAGS = $(AM_CXXFLAGS)
endif
# Let the user disable optimizations if he wishes to.
if !X86_OPTIMIZATIONS
libSoundTouchMMX_la_CXXFLAGS = $(AM_CXXFLAGS)
libSoundTouchSSE_la_CXXFLAGS = $(AM_CXXFLAGS)
endif
# other linking flags to add
# noinst_LTLIBRARIES = libSoundTouchOpt.la
# libSoundTouch_la_LIBADD = libSoundTouchOpt.la
# libSoundTouchOpt_la_SOURCES = mmx_optimized.cpp sse_optimized.cpp
# libSoundTouchOpt_la_CXXFLAGS = -O3 -msse -fcheck-new -I../../include
## Process this file with automake to create Makefile.in
##
## $Id: Makefile.am 138 2012-04-01 20:00:09Z oparviai $
##
## This file is part of SoundTouch, an audio processing library for pitch/time adjustments
##
## SoundTouch is free software; you can redistribute it and/or modify it under the
## terms of the GNU General Public License as published by the Free Software
## Foundation; either version 2 of the License, or (at your option) any later
## version.
##
## SoundTouch is distributed in the hope that it will be useful, but WITHOUT ANY
## WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR
## A PARTICULAR PURPOSE. See the GNU General Public License for more details.
##
## You should have received a copy of the GNU General Public License along with
## this program; if not, write to the Free Software Foundation, Inc., 59 Temple
## Place - Suite 330, Boston, MA 02111-1307, USA
include $(top_srcdir)/config/am_include.mk
# set to something if you want other stuff to be included in the distribution tarball
EXTRA_DIST=SoundTouch.dsp SoundTouch.dsw SoundTouch.sln SoundTouch.vcproj
noinst_HEADERS=AAFilter.h cpu_detect.h cpu_detect_x86.cpp FIRFilter.h RateTransposer.h TDStretch.h PeakFinder.h
lib_LTLIBRARIES=libSoundTouch.la
#
libSoundTouch_la_SOURCES=AAFilter.cpp FIRFilter.cpp FIFOSampleBuffer.cpp RateTransposer.cpp SoundTouch.cpp TDStretch.cpp cpu_detect_x86.cpp BPMDetect.cpp PeakFinder.cpp
# Compiler flags
AM_CXXFLAGS=-O3 -fcheck-new -I../../include
# Compile the files that need MMX and SSE individually.
libSoundTouch_la_LIBADD=libSoundTouchMMX.la libSoundTouchSSE.la
noinst_LTLIBRARIES=libSoundTouchMMX.la libSoundTouchSSE.la
libSoundTouchMMX_la_SOURCES=mmx_optimized.cpp
libSoundTouchSSE_la_SOURCES=sse_optimized.cpp
# We enable optimizations by default.
# If MMX is supported compile with -mmmx.
# Do not assume -msse is also supported.
if HAVE_MMX
libSoundTouchMMX_la_CXXFLAGS = -mmmx $(AM_CXXFLAGS)
else
libSoundTouchMMX_la_CXXFLAGS = $(AM_CXXFLAGS)
endif
# We enable optimizations by default.
# If SSE is supported compile with -msse.
if HAVE_SSE
libSoundTouchSSE_la_CXXFLAGS = -msse $(AM_CXXFLAGS)
else
libSoundTouchSSE_la_CXXFLAGS = $(AM_CXXFLAGS)
endif
# Let the user disable optimizations if he wishes to.
if !X86_OPTIMIZATIONS
libSoundTouchMMX_la_CXXFLAGS = $(AM_CXXFLAGS)
libSoundTouchSSE_la_CXXFLAGS = $(AM_CXXFLAGS)
endif
# other linking flags to add
# noinst_LTLIBRARIES = libSoundTouchOpt.la
# libSoundTouch_la_LIBADD = libSoundTouchOpt.la
# libSoundTouchOpt_la_SOURCES = mmx_optimized.cpp sse_optimized.cpp
# libSoundTouchOpt_la_CXXFLAGS = -O3 -msse -fcheck-new -I../../include

552
lib-src/soundtouch/source/SoundTouch/PeakFinder.cpp
View File

@@ -1,276 +1,276 @@
////////////////////////////////////////////////////////////////////////////////
///
/// Peak detection routine.
///
/// The routine detects highest value on an array of values and calculates the
/// precise peak location as a mass-center of the 'hump' around the peak value.
///
/// Author : Copyright (c) Olli Parviainen
/// Author e-mail : oparviai 'at' iki.fi
/// SoundTouch WWW: http://www.surina.net/soundtouch
///
////////////////////////////////////////////////////////////////////////////////
//
// Last changed : $Date: 2012-12-28 21:52:47 +0200 (Fri, 28 Dec 2012) $
// File revision : $Revision: 4 $
//
// $Id: PeakFinder.cpp 164 2012-12-28 19:52:47Z oparviai $
//
////////////////////////////////////////////////////////////////////////////////
//
// License :
//
// SoundTouch audio processing library
// Copyright (c) Olli Parviainen
//
// This library is free software; you can redistribute it and/or
// modify it under the terms of the GNU Lesser General Public
// License as published by the Free Software Foundation; either
// version 2.1 of the License, or (at your option) any later version.
//
// This library is distributed in the hope that it will be useful,
// but WITHOUT ANY WARRANTY; without even the implied warranty of
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
// Lesser General Public License for more details.
//
// You should have received a copy of the GNU Lesser General Public
// License along with this library; if not, write to the Free Software
// Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
//
////////////////////////////////////////////////////////////////////////////////
#include <math.h>
#include <assert.h>
#include "PeakFinder.h"
using namespace soundtouch;
#define max(x, y) (((x) > (y)) ? (x) : (y))
PeakFinder::PeakFinder()
{
minPos = maxPos = 0;
}
// Finds real 'top' of a peak hump from neighnourhood of the given 'peakpos'.
int PeakFinder::findTop(const float *data, int peakpos) const
{
int i;
int start, end;
float refvalue;
refvalue = data[peakpos];
// seek within <20>10 points
start = peakpos - 10;
if (start < minPos) start = minPos;
end = peakpos + 10;
if (end > maxPos) end = maxPos;
for (i = start; i <= end; i ++)
{
if (data[i] > refvalue)
{
peakpos = i;
refvalue = data[i];
}
}
// failure if max value is at edges of seek range => it's not peak, it's at slope.
if ((peakpos == start) || (peakpos == end)) return 0;
return peakpos;
}
// Finds 'ground level' of a peak hump by starting from 'peakpos' and proceeding
// to direction defined by 'direction' until next 'hump' after minimum value will
// begin
int PeakFinder::findGround(const float *data, int peakpos, int direction) const
{
int lowpos;
int pos;
int climb_count;
float refvalue;
float delta;
climb_count = 0;
refvalue = data[peakpos];
lowpos = peakpos;
pos = peakpos;
while ((pos > minPos+1) && (pos < maxPos-1))
{
int prevpos;
prevpos = pos;
pos += direction;
// calculate derivate
delta = data[pos] - data[prevpos];
if (delta <= 0)
{
// going downhill, ok
if (climb_count)
{
climb_count --; // decrease climb count
}
// check if new minimum found
if (data[pos] < refvalue)
{
// new minimum found
lowpos = pos;
refvalue = data[pos];
}
}
else
{
// going uphill, increase climbing counter
climb_count ++;
if (climb_count > 5) break; // we've been climbing too long => it's next uphill => quit
}
}
return lowpos;
}
// Find offset where the value crosses the given level, when starting from 'peakpos' and
// proceeds to direction defined in 'direction'
int PeakFinder::findCrossingLevel(const float *data, float level, int peakpos, int direction) const
{
float peaklevel;
int pos;
peaklevel = data[peakpos];
assert(peaklevel >= level);
pos = peakpos;
while ((pos >= minPos) && (pos < maxPos))
{
if (data[pos + direction] < level) return pos; // crossing found
pos += direction;
}
return -1; // not found
}
// Calculates the center of mass location of 'data' array items between 'firstPos' and 'lastPos'
double PeakFinder::calcMassCenter(const float *data, int firstPos, int lastPos) const
{
int i;
float sum;
float wsum;
sum = 0;
wsum = 0;
for (i = firstPos; i <= lastPos; i ++)
{
sum += (float)i * data[i];
wsum += data[i];
}
if (wsum < 1e-6) return 0;
return sum / wsum;
}
/// get exact center of peak near given position by calculating local mass of center
double PeakFinder::getPeakCenter(const float *data, int peakpos) const
{
float peakLevel; // peak level
int crosspos1, crosspos2; // position where the peak 'hump' crosses cutting level
float cutLevel; // cutting value
float groundLevel; // ground level of the peak
int gp1, gp2; // bottom positions of the peak 'hump'
// find ground positions.
gp1 = findGround(data, peakpos, -1);
gp2 = findGround(data, peakpos, 1);
groundLevel = 0.5f * (data[gp1] + data[gp2]);
peakLevel = data[peakpos];
// calculate 70%-level of the peak
cutLevel = 0.70f * peakLevel + 0.30f * groundLevel;
// find mid-level crossings
crosspos1 = findCrossingLevel(data, cutLevel, peakpos, -1);
crosspos2 = findCrossingLevel(data, cutLevel, peakpos, 1);
if ((crosspos1 < 0) || (crosspos2 < 0)) return 0; // no crossing, no peak..
// calculate mass center of the peak surroundings
return calcMassCenter(data, crosspos1, crosspos2);
}
double PeakFinder::detectPeak(const float *data, int aminPos, int amaxPos)
{
int i;
int peakpos; // position of peak level
double highPeak, peak;
this->minPos = aminPos;
this->maxPos = amaxPos;
// find absolute peak
peakpos = minPos;
peak = data[minPos];
for (i = minPos + 1; i < maxPos; i ++)
{
if (data[i] > peak)
{
peak = data[i];
peakpos = i;
}
}
// Calculate exact location of the highest peak mass center
highPeak = getPeakCenter(data, peakpos);
peak = highPeak;
// Now check if the highest peak were in fact harmonic of the true base beat peak
// - sometimes the highest peak can be Nth harmonic of the true base peak yet
// just a slightly higher than the true base
for (i = 3; i < 10; i ++)
{
double peaktmp, harmonic;
int i1,i2;
harmonic = (double)i * 0.5;
peakpos = (int)(highPeak / harmonic + 0.5f);
if (peakpos < minPos) break;
peakpos = findTop(data, peakpos); // seek true local maximum index
if (peakpos == 0) continue; // no local max here
// calculate mass-center of possible harmonic peak
peaktmp = getPeakCenter(data, peakpos);
// accept harmonic peak if
// (a) it is found
// (b) is within <20>4% of the expected harmonic interval
// (c) has at least half x-corr value of the max. peak
double diff = harmonic * peaktmp / highPeak;
if ((diff < 0.96) || (diff > 1.04)) continue; // peak too afar from expected
// now compare to highest detected peak
i1 = (int)(highPeak + 0.5);
i2 = (int)(peaktmp + 0.5);
if (data[i2] >= 0.4*data[i1])
{
// The harmonic is at least half as high primary peak,
// thus use the harmonic peak instead
peak = peaktmp;
}
}
return peak;
}
////////////////////////////////////////////////////////////////////////////////
///
/// Peak detection routine.
///
/// The routine detects highest value on an array of values and calculates the
/// precise peak location as a mass-center of the 'hump' around the peak value.
///
/// Author : Copyright (c) Olli Parviainen
/// Author e-mail : oparviai 'at' iki.fi
/// SoundTouch WWW: http://www.surina.net/soundtouch
///
////////////////////////////////////////////////////////////////////////////////
//
// Last changed : $Date: 2012-12-28 21:52:47 +0200 (Fri, 28 Dec 2012) $
// File revision : $Revision: 4 $
//
// $Id: PeakFinder.cpp 164 2012-12-28 19:52:47Z oparviai $
//
////////////////////////////////////////////////////////////////////////////////
//
// License :
//
// SoundTouch audio processing library
// Copyright (c) Olli Parviainen
//
// This library is free software; you can redistribute it and/or
// modify it under the terms of the GNU Lesser General Public
// License as published by the Free Software Foundation; either
// version 2.1 of the License, or (at your option) any later version.
//
// This library is distributed in the hope that it will be useful,
// but WITHOUT ANY WARRANTY; without even the implied warranty of
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
// Lesser General Public License for more details.
//
// You should have received a copy of the GNU Lesser General Public
// License along with this library; if not, write to the Free Software
// Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
//
////////////////////////////////////////////////////////////////////////////////
#include <math.h>
#include <assert.h>
#include "PeakFinder.h"
using namespace soundtouch;
#define max(x, y) (((x) > (y)) ? (x) : (y))
PeakFinder::PeakFinder()
{
minPos = maxPos = 0;
}
// Finds real 'top' of a peak hump from neighnourhood of the given 'peakpos'.
int PeakFinder::findTop(const float *data, int peakpos) const
{
int i;
int start, end;
float refvalue;
refvalue = data[peakpos];
// seek within <20>10 points
start = peakpos - 10;
if (start < minPos) start = minPos;
end = peakpos + 10;
if (end > maxPos) end = maxPos;
for (i = start; i <= end; i ++)
{
if (data[i] > refvalue)
{
peakpos = i;
refvalue = data[i];
}
}
// failure if max value is at edges of seek range => it's not peak, it's at slope.
if ((peakpos == start) || (peakpos == end)) return 0;
return peakpos;
}
// Finds 'ground level' of a peak hump by starting from 'peakpos' and proceeding
// to direction defined by 'direction' until next 'hump' after minimum value will
// begin
int PeakFinder::findGround(const float *data, int peakpos, int direction) const
{
int lowpos;
int pos;
int climb_count;
float refvalue;
float delta;
climb_count = 0;
refvalue = data[peakpos];
lowpos = peakpos;
pos = peakpos;
while ((pos > minPos+1) && (pos < maxPos-1))
{
int prevpos;
prevpos = pos;
pos += direction;
// calculate derivate
delta = data[pos] - data[prevpos];
if (delta <= 0)
{
// going downhill, ok
if (climb_count)
{
climb_count --; // decrease climb count
}
// check if new minimum found
if (data[pos] < refvalue)
{
// new minimum found
lowpos = pos;
refvalue = data[pos];
}
}
else
{
// going uphill, increase climbing counter
climb_count ++;
if (climb_count > 5) break; // we've been climbing too long => it's next uphill => quit
}
}
return lowpos;
}
// Find offset where the value crosses the given level, when starting from 'peakpos' and
// proceeds to direction defined in 'direction'
int PeakFinder::findCrossingLevel(const float *data, float level, int peakpos, int direction) const
{
float peaklevel;
int pos;
peaklevel = data[peakpos];
assert(peaklevel >= level);
pos = peakpos;
while ((pos >= minPos) && (pos < maxPos))
{
if (data[pos + direction] < level) return pos; // crossing found
pos += direction;
}
return -1; // not found
}
// Calculates the center of mass location of 'data' array items between 'firstPos' and 'lastPos'
double PeakFinder::calcMassCenter(const float *data, int firstPos, int lastPos) const
{
int i;
float sum;
float wsum;
sum = 0;
wsum = 0;
for (i = firstPos; i <= lastPos; i ++)
{
sum += (float)i * data[i];
wsum += data[i];
}
if (wsum < 1e-6) return 0;
return sum / wsum;
}
/// get exact center of peak near given position by calculating local mass of center
double PeakFinder::getPeakCenter(const float *data, int peakpos) const
{
float peakLevel; // peak level
int crosspos1, crosspos2; // position where the peak 'hump' crosses cutting level
float cutLevel; // cutting value
float groundLevel; // ground level of the peak
int gp1, gp2; // bottom positions of the peak 'hump'
// find ground positions.
gp1 = findGround(data, peakpos, -1);
gp2 = findGround(data, peakpos, 1);
groundLevel = 0.5f * (data[gp1] + data[gp2]);
peakLevel = data[peakpos];
// calculate 70%-level of the peak
cutLevel = 0.70f * peakLevel + 0.30f * groundLevel;
// find mid-level crossings
crosspos1 = findCrossingLevel(data, cutLevel, peakpos, -1);
crosspos2 = findCrossingLevel(data, cutLevel, peakpos, 1);
if ((crosspos1 < 0) || (crosspos2 < 0)) return 0; // no crossing, no peak..
// calculate mass center of the peak surroundings
return calcMassCenter(data, crosspos1, crosspos2);
}
double PeakFinder::detectPeak(const float *data, int aminPos, int amaxPos)
{
int i;
int peakpos; // position of peak level
double highPeak, peak;
this->minPos = aminPos;
this->maxPos = amaxPos;
// find absolute peak
peakpos = minPos;
peak = data[minPos];
for (i = minPos + 1; i < maxPos; i ++)
{
if (data[i] > peak)
{
peak = data[i];
peakpos = i;
}
}
// Calculate exact location of the highest peak mass center
highPeak = getPeakCenter(data, peakpos);
peak = highPeak;
// Now check if the highest peak were in fact harmonic of the true base beat peak
// - sometimes the highest peak can be Nth harmonic of the true base peak yet
// just a slightly higher than the true base
for (i = 3; i < 10; i ++)
{
double peaktmp, harmonic;
int i1,i2;
harmonic = (double)i * 0.5;
peakpos = (int)(highPeak / harmonic + 0.5f);
if (peakpos < minPos) break;
peakpos = findTop(data, peakpos); // seek true local maximum index
if (peakpos == 0) continue; // no local max here
// calculate mass-center of possible harmonic peak
peaktmp = getPeakCenter(data, peakpos);
// accept harmonic peak if
// (a) it is found
// (b) is within <20>4% of the expected harmonic interval
// (c) has at least half x-corr value of the max. peak
double diff = harmonic * peaktmp / highPeak;
if ((diff < 0.96) || (diff > 1.04)) continue; // peak too afar from expected
// now compare to highest detected peak
i1 = (int)(highPeak + 0.5);
i2 = (int)(peaktmp + 0.5);
if (data[i2] >= 0.4*data[i1])
{
// The harmonic is at least half as high primary peak,
// thus use the harmonic peak instead
peak = peaktmp;
}
}
return peak;
}

194
lib-src/soundtouch/source/SoundTouch/PeakFinder.h
View File

@@ -1,97 +1,97 @@
////////////////////////////////////////////////////////////////////////////////
///
/// The routine detects highest value on an array of values and calculates the
/// precise peak location as a mass-center of the 'hump' around the peak value.
///
/// Author : Copyright (c) Olli Parviainen
/// Author e-mail : oparviai 'at' iki.fi
/// SoundTouch WWW: http://www.surina.net/soundtouch
///
////////////////////////////////////////////////////////////////////////////////
//
// Last changed : $Date: 2011-12-30 22:33:46 +0200 (Fri, 30 Dec 2011) $
// File revision : $Revision: 4 $
//
// $Id: PeakFinder.h 132 2011-12-30 20:33:46Z oparviai $
//
////////////////////////////////////////////////////////////////////////////////
//
// License :
//
// SoundTouch audio processing library
// Copyright (c) Olli Parviainen
//
// This library is free software; you can redistribute it and/or
// modify it under the terms of the GNU Lesser General Public
// License as published by the Free Software Foundation; either
// version 2.1 of the License, or (at your option) any later version.
//
// This library is distributed in the hope that it will be useful,
// but WITHOUT ANY WARRANTY; without even the implied warranty of
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
// Lesser General Public License for more details.
//
// You should have received a copy of the GNU Lesser General Public
// License along with this library; if not, write to the Free Software
// Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
//
////////////////////////////////////////////////////////////////////////////////
#ifndef _PeakFinder_H_
#define _PeakFinder_H_
namespace soundtouch
{
class PeakFinder
{
protected:
/// Min, max allowed peak positions within the data vector
int minPos, maxPos;
/// Calculates the mass center between given vector items.
double calcMassCenter(const float *data, ///< Data vector.
int firstPos, ///< Index of first vector item beloging to the peak.
int lastPos ///< Index of last vector item beloging to the peak.
) const;
/// Finds the data vector index where the monotoniously decreasing signal crosses the
/// given level.
int findCrossingLevel(const float *data, ///< Data vector.
float level, ///< Goal crossing level.
int peakpos, ///< Peak position index within the data vector.
int direction /// Direction where to proceed from the peak: 1 = right, -1 = left.
) const;
// Finds real 'top' of a peak hump from neighnourhood of the given 'peakpos'.
int findTop(const float *data, int peakpos) const;
/// Finds the 'ground' level, i.e. smallest level between two neighbouring peaks, to right-
/// or left-hand side of the given peak position.
int findGround(const float *data, /// Data vector.
int peakpos, /// Peak position index within the data vector.
int direction /// Direction where to proceed from the peak: 1 = right, -1 = left.
) const;
/// get exact center of peak near given position by calculating local mass of center
double getPeakCenter(const float *data, int peakpos) const;
public:
/// Constructor.
PeakFinder();
/// Detect exact peak position of the data vector by finding the largest peak 'hump'
/// and calculating the mass-center location of the peak hump.
///
/// \return The location of the largest base harmonic peak hump.
double detectPeak(const float *data, /// Data vector to be analyzed. The data vector has
/// to be at least 'maxPos' items long.
int minPos, ///< Min allowed peak location within the vector data.
int maxPos ///< Max allowed peak location within the vector data.
);
};
}
#endif // _PeakFinder_H_
////////////////////////////////////////////////////////////////////////////////
///
/// The routine detects highest value on an array of values and calculates the
/// precise peak location as a mass-center of the 'hump' around the peak value.
///
/// Author : Copyright (c) Olli Parviainen
/// Author e-mail : oparviai 'at' iki.fi
/// SoundTouch WWW: http://www.surina.net/soundtouch
///
////////////////////////////////////////////////////////////////////////////////
//
// Last changed : $Date: 2011-12-30 22:33:46 +0200 (Fri, 30 Dec 2011) $
// File revision : $Revision: 4 $
//
// $Id: PeakFinder.h 132 2011-12-30 20:33:46Z oparviai $
//
////////////////////////////////////////////////////////////////////////////////
//
// License :
//
// SoundTouch audio processing library
// Copyright (c) Olli Parviainen
//
// This library is free software; you can redistribute it and/or
// modify it under the terms of the GNU Lesser General Public
// License as published by the Free Software Foundation; either
// version 2.1 of the License, or (at your option) any later version.
//
// This library is distributed in the hope that it will be useful,
// but WITHOUT ANY WARRANTY; without even the implied warranty of
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
// Lesser General Public License for more details.
//
// You should have received a copy of the GNU Lesser General Public
// License along with this library; if not, write to the Free Software
// Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
//
////////////////////////////////////////////////////////////////////////////////
#ifndef _PeakFinder_H_
#define _PeakFinder_H_
namespace soundtouch
{
class PeakFinder
{
protected:
/// Min, max allowed peak positions within the data vector
int minPos, maxPos;
/// Calculates the mass center between given vector items.
double calcMassCenter(const float *data, ///< Data vector.
int firstPos, ///< Index of first vector item beloging to the peak.
int lastPos ///< Index of last vector item beloging to the peak.
) const;
/// Finds the data vector index where the monotoniously decreasing signal crosses the
/// given level.
int findCrossingLevel(const float *data, ///< Data vector.
float level, ///< Goal crossing level.
int peakpos, ///< Peak position index within the data vector.
int direction /// Direction where to proceed from the peak: 1 = right, -1 = left.
) const;
// Finds real 'top' of a peak hump from neighnourhood of the given 'peakpos'.
int findTop(const float *data, int peakpos) const;
/// Finds the 'ground' level, i.e. smallest level between two neighbouring peaks, to right-
/// or left-hand side of the given peak position.
int findGround(const float *data, /// Data vector.
int peakpos, /// Peak position index within the data vector.
int direction /// Direction where to proceed from the peak: 1 = right, -1 = left.
) const;
/// get exact center of peak near given position by calculating local mass of center
double getPeakCenter(const float *data, int peakpos) const;
public:
/// Constructor.
PeakFinder();
/// Detect exact peak position of the data vector by finding the largest peak 'hump'
/// and calculating the mass-center location of the peak hump.
///
/// \return The location of the largest base harmonic peak hump.
double detectPeak(const float *data, /// Data vector to be analyzed. The data vector has
/// to be at least 'maxPos' items long.
int minPos, ///< Min allowed peak location within the vector data.
int maxPos ///< Max allowed peak location within the vector data.
);
};
}
#endif // _PeakFinder_H_

274
lib-src/soundtouch/source/SoundTouch/cpu_detect_x86.cpp
View File

@@ -1,137 +1,137 @@
////////////////////////////////////////////////////////////////////////////////
///
/// Generic version of the x86 CPU extension detection routine.
///
/// This file is for GNU & other non-Windows compilers, see 'cpu_detect_x86_win.cpp'
/// for the Microsoft compiler version.
///
/// Author : Copyright (c) Olli Parviainen
/// Author e-mail : oparviai 'at' iki.fi
/// SoundTouch WWW: http://www.surina.net/soundtouch
///
////////////////////////////////////////////////////////////////////////////////
//
// Last changed : $Date: 2012-11-08 20:44:37 +0200 (Thu, 08 Nov 2012) $
// File revision : $Revision: 4 $
//
// $Id: cpu_detect_x86.cpp 159 2012-11-08 18:44:37Z oparviai $
//
////////////////////////////////////////////////////////////////////////////////
//
// License :
//
// SoundTouch audio processing library
// Copyright (c) Olli Parviainen
//
// This library is free software; you can redistribute it and/or
// modify it under the terms of the GNU Lesser General Public
// License as published by the Free Software Foundation; either
// version 2.1 of the License, or (at your option) any later version.
//
// This library is distributed in the hope that it will be useful,
// but WITHOUT ANY WARRANTY; without even the implied warranty of
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
// Lesser General Public License for more details.
//
// You should have received a copy of the GNU Lesser General Public
// License along with this library; if not, write to the Free Software
// Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
//
////////////////////////////////////////////////////////////////////////////////
#include "cpu_detect.h"
#include "STTypes.h"
#if defined(SOUNDTOUCH_ALLOW_X86_OPTIMIZATIONS)
#if defined(__GNUC__) && defined(__i386__)
// gcc
#include "cpuid.h"
#elif defined(_M_IX86)
// windows non-gcc
#include <intrin.h>
#define bit_MMX (1 << 23)
#define bit_SSE (1 << 25)
#define bit_SSE2 (1 << 26)
#endif
#endif
//////////////////////////////////////////////////////////////////////////////
//
// processor instructions extension detection routines
//
//////////////////////////////////////////////////////////////////////////////
// Flag variable indicating whick ISA extensions are disabled (for debugging)
static uint _dwDisabledISA = 0x00; // 0xffffffff; //<- use this to disable all extensions
// Disables given set of instruction extensions. See SUPPORT_... defines.
void disableExtensions(uint dwDisableMask)
{
_dwDisabledISA = dwDisableMask;
}
/// Checks which instruction set extensions are supported by the CPU.
uint detectCPUextensions(void)
{
/// If building for a 64bit system (no Itanium) and the user wants optimizations.
/// Return the OR of SUPPORT_{MMX,SSE,SSE2}. 11001 or 0x19.
/// Keep the _dwDisabledISA test (2 more operations, could be eliminated).
#if ((defined(__GNUC__) && defined(__x86_64__)) \
|| defined(_M_X64)) \
&& defined(SOUNDTOUCH_ALLOW_X86_OPTIMIZATIONS)
return 0x19 & ~_dwDisabledISA;
/// If building for a 32bit system and the user wants optimizations.
/// Keep the _dwDisabledISA test (2 more operations, could be eliminated).
#elif ((defined(__GNUC__) && defined(__i386__)) \
|| defined(_M_IX86)) \
&& defined(SOUNDTOUCH_ALLOW_X86_OPTIMIZATIONS)
if (_dwDisabledISA == 0xffffffff) return 0;
uint res = 0;
#if defined(__GNUC__)
// GCC version of cpuid. Requires GCC 4.3.0 or later for __cpuid intrinsic support.
uint eax, ebx, ecx, edx; // unsigned int is the standard type. uint is defined by the compiler and not guaranteed to be portable.
// Check if no cpuid support.
if (!__get_cpuid (1, &eax, &ebx, &ecx, &edx)) return 0; // always disable extensions.
if (edx & bit_MMX) res = res | SUPPORT_MMX;
if (edx & bit_SSE) res = res | SUPPORT_SSE;
if (edx & bit_SSE2) res = res | SUPPORT_SSE2;
#else
// Window / VS version of cpuid. Notice that Visual Studio 2005 or later required
// for __cpuid intrinsic support.
int reg[4] = {-1};
// Check if no cpuid support.
__cpuid(reg,0);
if ((unsigned int)reg[0] == 0) return 0; // always disable extensions.
__cpuid(reg,1);
if ((unsigned int)reg[3] & bit_MMX) res = res | SUPPORT_MMX;
if ((unsigned int)reg[3] & bit_SSE) res = res | SUPPORT_SSE;
if ((unsigned int)reg[3] & bit_SSE2) res = res | SUPPORT_SSE2;
#endif
return res & ~_dwDisabledISA;
#else
/// One of these is true:
/// 1) We don't want optimizations.
/// 2) Using an unsupported compiler.
/// 3) Running on a non-x86 platform.
return 0;
#endif
}
////////////////////////////////////////////////////////////////////////////////
///
/// Generic version of the x86 CPU extension detection routine.
///
/// This file is for GNU & other non-Windows compilers, see 'cpu_detect_x86_win.cpp'
/// for the Microsoft compiler version.
///
/// Author : Copyright (c) Olli Parviainen
/// Author e-mail : oparviai 'at' iki.fi
/// SoundTouch WWW: http://www.surina.net/soundtouch
///
////////////////////////////////////////////////////////////////////////////////
//
// Last changed : $Date: 2012-11-08 20:44:37 +0200 (Thu, 08 Nov 2012) $
// File revision : $Revision: 4 $
//
// $Id: cpu_detect_x86.cpp 159 2012-11-08 18:44:37Z oparviai $
//
////////////////////////////////////////////////////////////////////////////////
//
// License :
//
// SoundTouch audio processing library
// Copyright (c) Olli Parviainen
//
// This library is free software; you can redistribute it and/or
// modify it under the terms of the GNU Lesser General Public
// License as published by the Free Software Foundation; either
// version 2.1 of the License, or (at your option) any later version.
//
// This library is distributed in the hope that it will be useful,
// but WITHOUT ANY WARRANTY; without even the implied warranty of
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
// Lesser General Public License for more details.
//
// You should have received a copy of the GNU Lesser General Public
// License along with this library; if not, write to the Free Software
// Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
//
////////////////////////////////////////////////////////////////////////////////
#include "cpu_detect.h"
#include "STTypes.h"
#if defined(SOUNDTOUCH_ALLOW_X86_OPTIMIZATIONS)
#if defined(__GNUC__) && defined(__i386__)
// gcc
#include "cpuid.h"
#elif defined(_M_IX86)
// windows non-gcc
#include <intrin.h>
#define bit_MMX (1 << 23)
#define bit_SSE (1 << 25)
#define bit_SSE2 (1 << 26)
#endif
#endif
//////////////////////////////////////////////////////////////////////////////
//
// processor instructions extension detection routines
//
//////////////////////////////////////////////////////////////////////////////
// Flag variable indicating whick ISA extensions are disabled (for debugging)
static uint _dwDisabledISA = 0x00; // 0xffffffff; //<- use this to disable all extensions
// Disables given set of instruction extensions. See SUPPORT_... defines.
void disableExtensions(uint dwDisableMask)
{
_dwDisabledISA = dwDisableMask;
}
/// Checks which instruction set extensions are supported by the CPU.
uint detectCPUextensions(void)
{
/// If building for a 64bit system (no Itanium) and the user wants optimizations.
/// Return the OR of SUPPORT_{MMX,SSE,SSE2}. 11001 or 0x19.
/// Keep the _dwDisabledISA test (2 more operations, could be eliminated).
#if ((defined(__GNUC__) && defined(__x86_64__)) \
|| defined(_M_X64)) \
&& defined(SOUNDTOUCH_ALLOW_X86_OPTIMIZATIONS)
return 0x19 & ~_dwDisabledISA;
/// If building for a 32bit system and the user wants optimizations.
/// Keep the _dwDisabledISA test (2 more operations, could be eliminated).
#elif ((defined(__GNUC__) && defined(__i386__)) \
|| defined(_M_IX86)) \
&& defined(SOUNDTOUCH_ALLOW_X86_OPTIMIZATIONS)
if (_dwDisabledISA == 0xffffffff) return 0;
uint res = 0;
#if defined(__GNUC__)
// GCC version of cpuid. Requires GCC 4.3.0 or later for __cpuid intrinsic support.
uint eax, ebx, ecx, edx; // unsigned int is the standard type. uint is defined by the compiler and not guaranteed to be portable.
// Check if no cpuid support.
if (!__get_cpuid (1, &eax, &ebx, &ecx, &edx)) return 0; // always disable extensions.
if (edx & bit_MMX) res = res | SUPPORT_MMX;
if (edx & bit_SSE) res = res | SUPPORT_SSE;
if (edx & bit_SSE2) res = res | SUPPORT_SSE2;
#else
// Window / VS version of cpuid. Notice that Visual Studio 2005 or later required
// for __cpuid intrinsic support.
int reg[4] = {-1};
// Check if no cpuid support.
__cpuid(reg,0);
if ((unsigned int)reg[0] == 0) return 0; // always disable extensions.
__cpuid(reg,1);
if ((unsigned int)reg[3] & bit_MMX) res = res | SUPPORT_MMX;
if ((unsigned int)reg[3] & bit_SSE) res = res | SUPPORT_SSE;
if ((unsigned int)reg[3] & bit_SSE2) res = res | SUPPORT_SSE2;
#endif
return res & ~_dwDisabledISA;
#else
/// One of these is true:
/// 1) We don't want optimizations.
/// 2) Using an unsupported compiler.
/// 3) Running on a non-x86 platform.
return 0;
#endif
}