mirror of
https://github.com/ElvishArtisan/rivendell.git
synced 2025-04-15 17:12:36 +02:00
45 lines
1.2 KiB
Plaintext
45 lines
1.2 KiB
Plaintext
; rlm_padpoint.conf
|
|
;
|
|
; This is the sample configuration file for the 'rlm_padpoint' module for
|
|
; Rivendell, which can be used to output Now & Next data to one or more
|
|
; PadPoint PAD processors.
|
|
;
|
|
; To enable this module, add it to the 'Loadable Modules' list in
|
|
; RDAdmin->ManageHosts->RDAirPlay->ConfigureNow&Next. The 'Argument'
|
|
; field should point to the location of this file.
|
|
|
|
; Section Header
|
|
;
|
|
; One section per remote UDP port is configured, starting with 'PadPoint1' and
|
|
; working up consecutively
|
|
[PadPoint1]
|
|
|
|
; IP Address
|
|
;
|
|
; The IP address of the remote PadPoint UDP port, in dotted-quad notation.
|
|
IpAddress=127.0.0.1
|
|
|
|
; UDP Port
|
|
;
|
|
; The UDP port number of the remote PadPoint UDP port, in the range 0 - 65,535.
|
|
UdpPort=3355
|
|
|
|
; Log Selection
|
|
;
|
|
; Set the status for each log to 'Yes', 'No' or 'Onair' to indicate whether
|
|
; state changes on that log should be output on this udp port. If set
|
|
; to 'Onair', then output will be generated only if RDAirPlays OnAir flag
|
|
; is active.
|
|
MasterLog=Yes
|
|
Aux1Log=Yes
|
|
Aux2Log=Yes
|
|
|
|
|
|
; Additional UDP destinations can be configured by adding new sections...
|
|
;[Udp2]
|
|
;IpAddress=192.168.10.22
|
|
;UdpPort=6789
|
|
;MasterLog=Yes
|
|
;Aux1Log=No
|
|
;Aux2Log=Onair
|