; rlm_serial.conf ; ; This is the sample configuration file for the 'rlm_serial' module for ; Rivendell, which can be used to output Now & Next data via one or more ; serial ports. ; ; To enable this module, add it to the 'Loadable Modules' list in ; RDAdmin->ManageHosts->RDAirPlay->ConfigureNow&Next. The 'Argument' ; field should point to the location of this file. ; ; NOTE: The serial ports configured here have NOTHING TO DO with the ; ports configured in RDAdmin! These ports are used strictly by the ; 'rlm_serial' plugin, and will not be usable by any other Rivendell ; component. ; Section Header ; ; One per serial device to be configured, starting with 'Serial1' and ; working up consecutively [Serial1] ; Serial Device ; ; The device file that corresponds to the serial device. Device=/dev/ttyS0 ; Serial Baud Rate (in bps) Speed=9600 ; Parity (0=none, 1=even, 2=odd) Parity=0 ; Number of bits per data 'word'. WordSize=8 ; Format String. The string to be output each time RDAirPlay changes ; play state, including any wildcards as placeholders for metadata values. ; ; The list of available wildcards can be found in the 'metadata_wildcards.txt' ; file in the Rivendell documentation directory. ; FormatString=NOW: %d(ddd MMM d hh:mm:ss yyyy): %t - %a\nNEXT: %D(ddd MMM d hh:mm:ss yyyy): %T - %A\n ; Encoding. Defines the set of escapes to be applied to the PAD fields. ; The following options are available: ; ; 0 - Perform no character escaping. ; 1 - "XML" escaping: Escape reserved characters as per XML-v1.0 ; 2 - "Web" escaping: Escape reserved characters as per RFC 2396 Section 2.4 Encoding=0 ; Null Update Handling. Defines how 'null' updates --i.e. those with a cart ; number of '0' -- should be handled. ; ; 0 - Process all updates regardless of cart values. ; 1 - Process update only if the 'now' cart is not null. ; 2 - Process update only if the 'next' cart is not null. ; 3 - Process update only if both the 'now' and 'next' carts are not null. ProcessNullUpdates=0 ; Log Selection ; ; Set the status for each log to 'Yes', 'No' or 'Onair' to indicate whether ; state changes on that log should be output on this serial port. If set ; to 'Onair', then output will be generated only if RDAirPlay's OnAir flag ; is active. MasterLog=Yes Aux1Log=Yes Aux2Log=Yes ; Additional serial ports can be configured by adding new sections... ;[Serial2] ;Device=/dev/ttyS1 ;Speed=9600 ;Parity=0 ;WordSize=8 ;FormatString=%t ;ProcessNullUpdates=0 ;MasterLog=Yes ;Aux1Log=No ;Aux2Log=Onair