; rlm_xds.conf
;
; This is the sample configuration file for the 'rlm_xds' module for 
; Rivendell, which can be used to output ISCI data for a Citidel X-Digital
; Vantive system via UDP.
; 
;
; To enable this module, add it to the 'Loadable Modules' list in 
; RDAdmin->ManageHosts->RDAirPlay->ConfigureNow&Next.  The 'Argument'
; field should point to the location of this file.

; Section Header
;
; One section per Vantive UDP port is configured, starting with 'Udp1' and 
; working up consecutively
[Udp1]

; IP Address
;
; The IP address of the remote UDP port, in dotted-quad notation.
IpAddress=192.168.20.15

; UDP Port
;
; The UDP port number of the remote UDP port, in the range 0 - 65,535.
UdpPort=1234

; TTY Device
;
; Use the specified TTY device instead of UDP to send CICs.
TtyDevice=/dev/ttyS0
TtySpeed=19200

; ISCI Prefix
;
; The string to prepend to transmitted ISCI code strings.
;
IsciPrefix=TEST_

; Log Selection
;
; Set the status for each log to 'Yes', 'No' or 'Onair' to indicate whether
; state changes on that log should be output on this port.  If set
; to 'Onair', then output will be generated only if RDAirPlays OnAir flag
; is active.
MasterLog=Yes
Aux1Log=Yes
Aux2Log=Yes


; Additional Vantive destinations can be configured by adding new sections...
;[Udp2]
;IpAddress=192.168.10.22
;UdpPort=6789
;TtyDevice=/dev/ttyS1
;MasterLog=Yes
;Aux1Log=No
;Aux2Log=Onair