; This is the configuration for the 'pypad_xds' script for ; Rivendell, which can be used to output ISCI data for a Citidel X-Digital ; Vantive system via UDP or serial. ; Section Header ; ; One section per Vantive UDP port is configured, starting with 'Udp1' and ; working up consecutively [Udp1] ; IP Address ; ; The IP address of the remote UDP port, in dotted-quad notation. IpAddress=127.0.0.1 ; UDP Port ; ; The UDP port number of the remote UDP port, in the range 0 - 65,535. UdpPort=1234 ; TTY Device ; ; Use the specified TTY device instead of UDP to send CICs. ;TtyDevice=/dev/ttyS0 ;TtySpeed=19200 ; ISCI Prefix ; ; The string to prepend to transmitted ISCI code strings. ; IsciPrefix=TEST_ ; Repetitions ; ; Send each CIC update packet this many times. Repetitions=1 ; Repetition Delay ; ; Delay this many milliseconds between each repetition. RepetitionDelay=100 ; Log Selection ; ; Set the status for each log to 'Yes', 'No' or 'Onair' to indicate whether ; state changes on that log should be output on this port. If set ; to 'Onair', then output will be generated only if RDAirPlays OnAir flag ; is active. MasterLog=Yes Aux1Log=Yes Aux2Log=Yes VLog101=No VLog102=No VLog103=No VLog104=No VLog105=No VLog106=No VLog107=No VLog108=No VLog109=No VLog110=No VLog111=No VLog112=No VLog113=No VLog114=No VLog115=No VLog116=No VLog117=No VLog118=No VLog119=No VLog120=No [NowGroups] ; Group Selection ; ; Filter updates according to the Group membership of the 'now' playing ; event. If no groups are listed here and in the [NextGroups] section, ; then ALL updates will be forwarded ; without regard to Group. ; Group1=MUSIC ; Group2=LEGAL ; [...] ; Additional groups can be added... [NextGroups] ; Group Selection ; ; Filter updates according to the Group membership of the 'next' playing ; event. If no groups are listed here, If no groups are listed here and in ; the [NowGroups] section,then ALL updates will be forwarded ; without regard to Group. ; Group1=MUSIC ; Group2=LEGAL ; [...] ; Additional groups can be added...