; rlm_inno713.conf
;
; This is the sample configuration file for the 'rlm_inno713' module for 
; Rivendell, which can be used to output Now & Next data to one or more
; Innovonics model 713 RDS encoders.
;
; To enable this module, add it to the 'Loadable Modules' list in 
; RDAdmin->ManageHosts->RDAirPlay->ConfigureNow&Next.  The 'Argument'
; field should point to the location of this file.

; Section Header
;
; One section per remote RDS unit is configured, starting with 'Rds1' and 
; working up consecutively
[Rds1]

; Two methods of connecting to the unit are supported: TCP/IP or serial.
;
; *****************************************************************************
; TCP/IP Connection Settings
;  IP Address
;
; The IP address of the UDP port to send updates to, in dotted-quad notation.
; If using a serial connection, leave this entry blank!
IpAddress=127.0.0.1

; UDP Port
;
; The UDP port number to send updates to, in the range 0 - 65,535.
UdpPort=10001
; *****************************************************************************

; *****************************************************************************
; Serial Connection Settings
; 
; The device file that corresponds to the serial device that is connected
; to the unit.  If using a TCP/IP connection, leave this entry blank!
;Device=/dev/ttyS0

; Serial Baud Rate (in bps)
Speed=9600

; Parity (0=none, 1=even, 2=odd)
Parity=0

; Number of bits per data 'word'.
WordSize=8
; *****************************************************************************

; Output Strings.  The PAD data to output each time RDAirPlay changes
; play state, including any wildcards as placeholders for metadata values.
; Three different RDS values can be set:
;
;          PS -- the standard "static" RDS PS field.
;  Dynamic PS -- a special scrolling PS mode that allows strings longer than
;                eight characters to be displayed on RDS compliant radios.
;                See the model 713 manual for a discussion of the tradeoffs
;                between the two PS display modes.
;   Radiotext -- Standard RDS radiotext. 
;
; The following wildcards are available:
;
;  Now  Next  Field
;  ----------------------------------------------
;   %n   %N   The Rivendell cart number
;   %h   %H   Event length (in milliseconds)
;   %g   %G   The Rivendell group name
;   %t   %T   Title
;   %a   %A   Artist
;   %l   %L   Album
;   %y   %Y   Year
;   %b   %B   Record Label
;   %c   %C   Client
;   %e   %E   Agency
;   %m   %M   Composer
;   %p   %P   Publisher
;   %r   %R   Conductor
;   %s   %S   Song ID
;   %u   %U   User Definied
;   %o   %O   Outcue
;   %i   %I   Description
PsString=
DynamicPsString=%t
RadiotextString=%a

; Log Selection
;
; Set the status for each log to 'Yes', 'No' or 'Onair' to indicate whether
; state changes on that log should be output on this udp port.  If set
; to 'Onair', then output will be generated only if RDAirPlays OnAir flag
; is active.
MasterLog=Yes
Aux1Log=Yes
Aux2Log=Yes


; Additional RDS encoders can be configured by adding new sections...
;[Rds2]
;IpAddress=192.168.10.22
;UdpPort=6789
;Device=/dev/ttyS0
;Speed=9600
;Parity=0
;WordSize=8
;PsString=
;DynamicPsString=%t
;RadiotextString=%a
;MasterLog=Yes
;Aux1Log=No
;Aux2Log=Onair