; rlm_xds.conf ; ; This is the sample configuration file for the 'rlm_xds' module for ; Rivendell, which can be used to output ISCI data for a Citidel X-Digital ; Vantive system via UDP. ; ; ; To enable this module, add it to the 'Loadable Modules' list in ; RDAdmin->ManageHosts->RDAirPlay->ConfigureNow&Next. The 'Argument' ; field should point to the location of this file. ; Section Header ; ; One section per Vantive UDP port is configured, starting with 'Udp1' and ; working up consecutively [Udp1] ; IP Address ; ; The IP address of the remote UDP port, in dotted-quad notation. IpAddress=192.168.20.15 ; UDP Port ; ; The UDP port number of the remote UDP port, in the range 0 - 65,535. UdpPort=1234 ; TTY Device ; ; Use the specified TTY device instead of UDP to send CICs. TtyDevice=/dev/ttyS0 TtySpeed=19200 ; ISCI Prefix ; ; The string to prepend to transmitted ISCI code strings. ; IsciPrefix=TEST_ ; Log Selection ; ; Set the status for each log to 'Yes', 'No' or 'Onair' to indicate whether ; state changes on that log should be output on this port. If set ; to 'Onair', then output will be generated only if RDAirPlays OnAir flag ; is active. MasterLog=Yes Aux1Log=Yes Aux2Log=Yes VLog101=No VLog102=No VLog103=No VLog104=No VLog105=No VLog106=No VLog107=No VLog108=No VLog109=No VLog110=No VLog111=No VLog112=No VLog113=No VLog114=No VLog115=No VLog116=No VLog117=No VLog118=No VLog119=No VLog120=No ; Additional Vantive destinations can be configured by adding new sections... ;[Udp2] ;IpAddress=192.168.10.22 ;UdpPort=6789 ;TtyDevice=/dev/ttyS1 ;MasterLog=Yes ;Aux1Log=No ;Aux2Log=Onair ;VLog101=No ;VLog102=No ;VLog103=No ;VLog104=No ;VLog105=No ;VLog106=No ;VLog107=No ;VLog108=No ;VLog109=No ;VLog110=No ;VLog111=No ;VLog112=No ;VLog113=No ;VLog114=No ;VLog115=No ;VLog116=No ;VLog117=No ;VLog118=No ;VLog119=No ;VLog120=No