; This is the configuration for the 'rlm_inno713.py' script for 
; Rivendell, which can be used to output Now & Next data to one or more
; Innovonics model 713 RDS encoders.

; Section Header
;
; One section per remote RDS unit is configured, starting with 'Rds1' and 
; working up consecutively
[Rds1]

; Two methods of connecting to the unit are supported: TCP/IP or serial.
;
; *****************************************************************************
; TCP/IP Connection Settings
;  IP Address
;
; The IP address of the UDP port to send updates to, in dotted-quad notation.
; If using a serial connection, leave this entry blank!
IpAddress=127.0.0.1

; UDP Port
;
; The UDP port number to send updates to, in the range 0 - 65,535.
UdpPort=10001
; *****************************************************************************

; *****************************************************************************
; Serial Connection Settings
; 
; The device file that corresponds to the serial device that is connected
; to the unit.  If using a TCP/IP connection, leave this entry blank!
;Device=/dev/ttyS0

; Serial Baud Rate (in bps)
Speed=9600

; Parity (0=none, 1=even, 2=odd)
Parity=0

; Number of bits per data 'word'.
WordSize=8
; *****************************************************************************

; Output Strings.  The PAD data to output each time RDAirPlay changes
; play state, including any wildcards as placeholders for metadata values.
;
; For the list of supported wildcards. see the 'Metadata Wildcards' section
; of the Rivendell Operations Guide.
PsString=
DynamicPsString=%t
RadiotextString=%a

; Log Selection
;
; Set the status for each log to 'Yes', 'No' or 'Onair' to indicate whether
; state changes on that log should be output on this udp port.  If set
; to 'Onair', then output will be generated only if RDAirPlays OnAir flag
; is active.
MasterLog=Yes
Aux1Log=Yes
Aux2Log=Yes
VLog101=No
VLog102=No
VLog103=No
VLog104=No
VLog105=No
VLog106=No
VLog107=No
VLog108=No
VLog109=No
VLog110=No
VLog111=No
VLog112=No
VLog113=No
VLog114=No
VLog115=No
VLog116=No
VLog117=No
VLog118=No
VLog119=No
VLog120=No


; Additional RDS encoders can be configured by adding new sections...
;[Rds2]
;IpAddress=192.168.10.22
;UdpPort=6789
;Device=/dev/ttyS0
;Speed=9600
;Parity=0
;WordSize=8
;PsString=
;DynamicPsString=%t
;RadiotextString=%a
;MasterLog=Yes
;Aux1Log=No
;Aux2Log=Onair
;VLog101=No
;VLog102=No
;VLog103=No
;VLog104=No
;VLog105=No
;VLog106=No
;VLog107=No
;VLog108=No
;VLog109=No
;VLog110=No
;VLog111=No
;VLog112=No
;VLog113=No
;VLog114=No
;VLog115=No
;VLog116=No
;VLog117=No
;VLog118=No
;VLog119=No
;VLog120=No