; rlm_spottrap.conf
;
; This is the sample configuration file for the 'rlm_spottrap' module for 
; Rivendell, which can be used to output Now & Next data to one or more
; remote UDP ports on the basis of Group and Length.
;
; To enable this module, add it to the 'Loadable Modules' list in 
; RDAdmin->ManageHosts->RDAirPlay->ConfigureNow&Next.  The 'Argument'
; field should point to the location of this file.
;
; Module configuration consists of a list of rules, each of which consists
; in turn with a set of filter parameters and actions.  Each PAD update is
; compared against the filter parameters of each rule.  If the filter matches,
; then the rule actions are performed.
;

; Rule Header
;
; One section per rule is configured, starting with 'Rule1' and 
; working up consecutively
[Rule1]

; FILTER PARAMETERS
;
; Group Name
;
; The name of the Rivendell group to match.
GroupName=BEDS

; Minimum Length
;
; The minimum length, in milliseconds.  A PAD update with a Length of less
; than this value will not be matched.
MinimumLength=0

; Maximum Length
; The maximum length, in milliseconds.  A PAD update with a Length of more
; than this value will not be matched.  
MaximumLength=10000000

; ACTION PARAMETERS
;
; IP Address
;
; The IP address of the remote UDP port, in dotted-quad notation.
IpAddress=192.168.10.30

; UDP Port
;
; The UDP port number of the remote UDP port, in the range 0 - 65,535.
UdpPort=5859

; Format String.  The string to be output each time RDAirPlay changes
; play state, including any wildcards as placeholders for metadata values.
;
; The list of available wildcards can be found in the 'metadata_wildcards.txt'
; file in the Rivendell documentation directory.
;
FormatString=DX 1 %h!

; Default Format String.  Similar to the 'FormatString=' parameter described
; above, but this string is output when the rule *doesn't* match.  All of
; the wildcards described in the 'FormatString=' section apply here as well.
DefaultFormatString=DX 1 0!


; Log Selection
;
; Set the status for each log to 'Yes', 'No' or 'Onair' to indicate whether
; state changes on that log should be output on this udp port.  If set
; to 'Onair', then output will be generated only if RDAirPlay's OnAir flag
; is active.
MasterLog=Yes
Aux1Log=Yes
Aux2Log=Yes


; Additional Rules can be configured by adding new sections...
;[Rule2]
;GroupName=TEST
;MinimumLength=0
;MaximumLength=1000000
;FormatString=Artist: %a%r
;DefaultFormatString=Artist: %a%r
;IpAddress=192.168.10.30
;UdpPort=6789
;MasterLog=Yes
;Aux1Log=No
;Aux2Log=Onair