Initial import of CVS-v2_8_branch

conf/rlm_xds.conf

@@ -0,0 +1,58 @@
+; rlm_xds.conf
+;
+; This is the sample configuration file for the 'rlm_xds' module for 
+; Rivendell, which can be used to output ISCI data for a Citidel X-Digital
+; Vantive system via UDP.
+; 
+;
+; To enable this module, add it to the 'Loadable Modules' list in 
+; RDAdmin->ManageHosts->RDAirPlay->ConfigureNow&Next.  The 'Argument'
+; field should point to the location of this file.
+
+; Section Header
+;
+; One section per Vantive UDP port is configured, starting with 'Udp1' and 
+; working up consecutively
+[Udp1]
+
+; IP Address
+;
+; The IP address of the remote UDP port, in dotted-quad notation.
+IpAddress=192.168.20.15
+
+; UDP Port
+;
+; The UDP port number of the remote UDP port, in the range 0 - 65,535.
+UdpPort=1234
+
+; TTY Device
+;
+; Use the specified TTY device instead of UDP to send CICs.
+TtyDevice=/dev/ttyS0
+TtySpeed=19200
+
+; ISCI Prefix
+;
+; The string to prepend to transmitted ISCI code strings.
+;
+IsciPrefix=TEST_
+
+; Log Selection
+;
+; Set the status for each log to 'Yes', 'No' or 'Onair' to indicate whether
+; state changes on that log should be output on this port.  If set
+; to 'Onair', then output will be generated only if RDAirPlays OnAir flag
+; is active.
+MasterLog=Yes
+Aux1Log=Yes
+Aux2Log=Yes
+
+
+; Additional Vantive destinations can be configured by adding new sections...
+;[Udp2]
+;IpAddress=192.168.10.22
+;UdpPort=6789
+;TtyDevice=/dev/ttyS1
+;MasterLog=Yes
+;Aux1Log=No
+;Aux2Log=Onair