2019-01-08 Fred Gleason <fredg@paravelsystems.com>

* Changed the PyPAD namespace from 'PyPAD' to 'pypad'.
	* Changed the installation location of PyPAD scripts from
	'@libdir@/rivendell/PyPAD/' to '@libdir@/rivendell/pypad/'.

apis/pypad/scripts/pypad_xds.exemplar

@@ -0,0 +1,92 @@
+; This is the configuration for the 'pypad_xds' script for 
+; Rivendell, which can be used to output ISCI data for a Citidel X-Digital
+; Vantive system via UDP or serial.
+
+; Section Header
+;
+; One section per Vantive UDP port is configured, starting with 'Udp1' and 
+; working up consecutively
+[Udp1]
+
+; IP Address
+;
+; The IP address of the remote UDP port, in dotted-quad notation.
+IpAddress=127.0.0.1
+
+; UDP Port
+;
+; The UDP port number of the remote UDP port, in the range 0 - 65,535.
+UdpPort=1234
+
+; TTY Device
+;
+; Use the specified TTY device instead of UDP to send CICs.
+;TtyDevice=/dev/ttyS0
+;TtySpeed=19200
+
+; ISCI Prefix
+;
+; The string to prepend to transmitted ISCI code strings.
+;
+IsciPrefix=TEST_
+
+; Log Selection
+;
+; Set the status for each log to 'Yes', 'No' or 'Onair' to indicate whether
+; state changes on that log should be output on this port.  If set
+; to 'Onair', then output will be generated only if RDAirPlays OnAir flag
+; is active.
+MasterLog=Yes
+Aux1Log=Yes
+Aux2Log=Yes
+VLog101=No
+VLog102=No
+VLog103=No
+VLog104=No
+VLog105=No
+VLog106=No
+VLog107=No
+VLog108=No
+VLog109=No
+VLog110=No
+VLog111=No
+VLog112=No
+VLog113=No
+VLog114=No
+VLog115=No
+VLog116=No
+VLog117=No
+VLog118=No
+VLog119=No
+VLog120=No
+
+
+; Additional Vantive destinations can be configured by adding new sections...
+;[Udp2]
+;IpAddress=192.168.10.22
+;UdpPort=6789
+;TtyDevice=/dev/ttyS1
+;TtySpeed=19200
+;MasterLog=Yes
+;Aux1Log=No
+;Aux2Log=Onair
+;VLog101=No
+;VLog102=No
+;VLog103=No
+;VLog104=No
+;VLog105=No
+;VLog106=No
+;VLog107=No
+;VLog108=No
+;VLog109=No
+;VLog110=No
+;VLog111=No
+;VLog112=No
+;VLog113=No
+;VLog114=No
+;VLog115=No
+;VLog116=No
+;VLog117=No
+;VLog118=No
+;VLog119=No
+;VLog120=No