diff --git a/ChangeLog b/ChangeLog
index ded6db1b..b3de49d7 100644
--- a/ChangeLog
+++ b/ChangeLog
@@ -20712,3 +20712,9 @@
 	* Added code to print the value of the detected CartChunk CutID
 	when using both the '--use-cartchunk-cutid' and '--verbose' flags
 	in rdimport(1).
+2021-04-05 Eric Adler <tonsofpcs@gmail.com>
+	* Created pypad_ino713_tcp based upon pypad_ino713, converting from
+	UDP to TCP. Added an adjustable delay to account for broadcast air
+	delays.
+	* Created pypad_nautel based upon pypad_ino713_tcp, including RDS
+	parameters from documentation. Includes delay.
diff --git a/apis/pypad/scripts/pypad_ino713_tcp.exemplar b/apis/pypad/scripts/pypad_ino713_tcp.exemplar
new file mode 100644
index 00000000..d4a3f1ca
--- /dev/null
+++ b/apis/pypad/scripts/pypad_ino713_tcp.exemplar
@@ -0,0 +1,100 @@
+; This is the configuration for the 'pypad_ino713_tcp.py' script for
+; Rivendell, which can be used to output Now & Next data to one or more
+; Inovonics model 713 RDS encoders or Nautel VS transmitters in TCP mode.
+
+; Section Header
+;
+; One section per remote RDS unit is configured, starting with 'Rds1' and
+; working up consecutively
+[Rds1]
+
+; *****************************************************************************
+; TCP/IP Connection Settings
+;  IP Address
+;
+; The IP address of the TCP port to send updates to, in dotted-quad notation.
+; If using a serial connection, leave this entry blank!
+IpAddress=127.0.0.1
+
+; TCP Port
+;
+; The TCP port number to send updates to, in the range 0 - 65,535.  
+TcpPort=10001
+
+; *****************************************************************************
+
+; Delay in seconds before sending the update
+Delay=30
+
+; *****************************************************************************
+
+; Output Strings.  The PAD data to output each time RDAirPlay changes
+; play state, including any wildcards as placeholders for metadata values.
+;
+; For the list of supported wildcards. see the 'Metadata Wildcards' section
+; of the Rivendell Operations Guide.
+PsString=
+DynamicPsString=%t - %a
+RadiotextString=%t - %a
+
+; Log Selection
+;
+; Set the status for each log to 'Yes', 'No' or 'Onair' to indicate whether
+; state changes on that log should be output on this udp port.  If set
+; to 'Onair', then output will be generated only if RDAirPlays OnAir flag
+; is active.
+MasterLog=Onair
+Aux1Log=No
+Aux2Log=No
+VLog101=No
+VLog102=No
+VLog103=No
+VLog104=No
+VLog105=No
+VLog106=No
+VLog107=No
+VLog108=No
+VLog109=No
+VLog110=No
+VLog111=No
+VLog112=No
+VLog113=No
+VLog114=No
+VLog115=No
+VLog116=No
+VLog117=No
+VLog118=No
+VLog119=No
+VLog120=No
+
+; Additional RDS encoders can be configured by adding new sections...
+;[Rds2]
+;IpAddress=192.168.10.22
+;TcpPort=6789
+;Delay=20
+;PsString=
+;DynamicPsString=%t
+;RadiotextString=%a
+;MasterLog=Yes
+;Aux1Log=No
+;Aux2Log=Onair
+;VLog101=No
+;VLog102=No
+;VLog103=No
+;VLog104=No
+;VLog105=No
+;VLog106=No
+;VLog107=No
+;VLog108=No
+;VLog109=No
+;VLog110=No
+;VLog111=No
+;VLog112=No
+;VLog113=No
+;VLog114=No
+;VLog115=No
+;VLog116=No
+;VLog117=No
+;VLog118=No
+;VLog119=No
+;VLog120=No
diff --git a/apis/pypad/scripts/pypad_ino713_tcp.py b/apis/pypad/scripts/pypad_ino713_tcp.py
new file mode 100644
index 00000000..95aa8f4f
--- /dev/null
+++ b/apis/pypad/scripts/pypad_ino713_tcp.py
@@ -0,0 +1,86 @@
+#!/usr/bin/python3
+
+# pypad_ino713_tcp.py
+#
+# Send Now & Next updates to an Inovonics 713 RDS encoder as TCP
+#
+#   (C) Copyright 2018 Fred Gleason <fredg@paravelsystems.com>
+#                 2020 Eric Adler <eric@whrwfm.org>
+#
+#   This program is free software; you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License version 2 as
+#   published by the Free Software Foundation.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public
+#   License along with this program; if not, write to the Free Software
+#   Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+#
+
+import sys
+import socket
+import configparser
+import pypad
+import time
+
+def eprint(*args,**kwargs):
+    print(*args,file=sys.stderr,**kwargs)
+
+
+def ProcessPad(update):
+    n=1
+    section='Rds'+str(n)
+    while(update.config().has_section(section)):
+        if update.shouldBeProcessed(section) and update.hasPadType(pypad.TYPE_NOW):
+            dps=''
+            if(len(update.config().get(section,'DynamicPsString'))!=0):
+                dps='DPS='+update.resolvePadFields(update.config().get(section,'DynamicPsString'),pypad.ESCAPE_NONE)+'\r\n'
+            ps=''
+            if(len(update.config().get(section,'PsString'))!=0):
+                ps='PS='+update.resolvePadFields(update.config().get(section,'PsString'),pypad.ESCAPE_NONE)+'\r\n'
+            text=''
+            if(len(update.config().get(section,'RadiotextString'))!=0):
+                text='TEXT='+update.resolvePadFields(update.config().get(section,'RadiotextString'),pypad.ESCAPE_NONE)+'\r\n'
+            #
+            # Use TCP output
+            #
+            waittime=int(update.config().get(section,'Delay'))
+            time.sleep(waittime)
+            ipaddr=update.config().get(section,'IpAddress')
+            port=int(update.config().get(section,'TcpPort'))
+            if(len(dps)!=0):
+                send_sock=socket.socket(socket.AF_INET,socket.SOCK_STREAM)
+                send_sock.connect((ipaddr,port))
+                send_sock.sendall(dps.encode('utf-8'))
+                send_sock.close()
+            if(len(ps)!=0):
+                send_sock=socket.socket(socket.AF_INET,socket.SOCK_STREAM)
+                send_sock.connect((ipaddr,port))
+                send_sock.sendall(ps.encode('utf-8'))
+                send_sock.close()
+            if(len(text)!=0):
+                send_sock=socket.socket(socket.AF_INET,socket.SOCK_STREAM)
+                send_sock.connect((ipaddr,port))
+                send_sock.sendall(text.encode('utf-8'))
+                send_sock.close()
+        n=n+1
+        section='Rds'+str(n)
+
+#
+# 'Main' function
+#
+# Create Send Socket
+#
+
+rcvr=pypad.Receiver()
+try:
+    rcvr.setConfigFile(sys.argv[3])
+except IndexError:
+    eprint('pypad_inno713.py: USAGE: cmd <hostname> <port> <config>')
+    sys.exit(1)
+rcvr.setPadCallback(ProcessPad)
+rcvr.start(sys.argv[1],int(sys.argv[2]))
diff --git a/apis/pypad/scripts/pypad_nautel.exemplar b/apis/pypad/scripts/pypad_nautel.exemplar
new file mode 100644
index 00000000..619cbc41
--- /dev/null
+++ b/apis/pypad/scripts/pypad_nautel.exemplar
@@ -0,0 +1,190 @@
+; This is the configuration for the 'pypad_nautel.py' script for
+; Rivendell, which can be used to output Now & Next data to one or more
+; Nautel VS transmitters as RDP in ASCII TCP mode.
+
+; Section Header
+;
+; One section per remote transmitter unit is configured, starting with 'Rds1' and
+; working up consecutively
+[Rds1]
+
+; *****************************************************************************
+; TCP/IP Connection Settings
+;  IP Address
+;
+; The IP address of the TCP port to send updates to, in dotted-quad notation.
+; If using a serial connection, leave this entry blank!
+IpAddress=127.0.0.1
+
+; TCP Port
+;
+; The TCP port number to send updates to, in the range 0 - 65,535.  
+TcpPort=10001
+
+; *****************************************************************************
+
+; Delay in seconds before sending the update
+Delay=30
+
+; *****************************************************************************
+
+; Output Strings.  The PAD data to output each time RDAirPlay changes
+; play state, including any wildcards as placeholders for metadata values.
+;
+; For the list of supported wildcards. see the 'Metadata Wildcards' section
+; of the Rivendell Operations Guide.
+;
+; I recommend setting just these three unless you really know what you're doing
+; documentation is in section 2 of the VS OPS Manual.  
+; In issue 10.0 for the NV2.5 this is on page 2-69
+
+;Program Service - 8 character ASCII tagline, often callsign or a short name
+ProgramService=
+;Dynamic PS - 
+DynamicPS=%t - %a
+;Radio Text - up to 64 characters
+RadioText=%t - %a
+
+;; These settings are not recommended to be changed unless you really know
+;; what you are doing and why you are doing it.  
+;; Per the manual, not all values can be unset by the TCP ASCII connection.
+;;PICode= ***SET THIS IN YOUR TRANSMITTER PER THE RDS/RDBS SPEC***
+;ProgramType=0
+;ProgramTypeName=
+;TrafficProgram=0
+;TrafficAnnouncement=0
+;AltFreq1=107
+;AltFreq2=107
+;AltFreq3=107
+;AltFreq4=107
+;AltFreq5=107
+;AltFreq6=107
+;AltFreq7=107
+;AltFreq8=107
+;AltFreq9=107
+;AltFreq10=107
+;AltFreq11=107
+;AltFreq12=107
+;AltFreq13=107
+;AltFreq14=107
+;AltFreq15=107
+;AltFreq16=107
+;AltFreq17=107
+;AltFreq18=107
+;AltFreq19=107
+;AltFreq20=107
+;AltFreq21=107
+;AltFreq22=107
+;AltFreq23=107
+;AltFreq24=107
+;AltFreq25=107
+;DecoderInfo=3
+;MusicSpeech=1
+;Date=
+;Time=
+;UTCOffset=39
+;Cont=
+;DPSRate=0
+;DPSMode=0
+
+
+
+; Log Selection
+;
+; Set the status for each log to 'Yes', 'No' or 'Onair' to indicate whether
+; state changes on that log should be output on this udp port.  If set
+; to 'Onair', then output will be generated only if RDAirPlays OnAir flag
+; is active.
+MasterLog=Onair
+Aux1Log=No
+Aux2Log=No
+VLog101=No
+VLog102=No
+VLog103=No
+VLog104=No
+VLog105=No
+VLog106=No
+VLog107=No
+VLog108=No
+VLog109=No
+VLog110=No
+VLog111=No
+VLog112=No
+VLog113=No
+VLog114=No
+VLog115=No
+VLog116=No
+VLog117=No
+VLog118=No
+VLog119=No
+VLog120=No
+
+; Additional RDS encoders can be configured by adding new sections...
+;[Rds2]
+;IpAddress=192.168.10.22
+;TcpPort=6789
+;Delay=20
+;ProgramService=
+;DynamicPS=%t
+;RadioText=%a
+;;PICode= ***SET THIS IN YOUR TRANSMITTER PER THE RDS/RDBS SPEC***
+;ProgramType=0
+;ProgramTypeName=
+;TrafficProgram=0
+;TrafficAnnouncement=0
+;AltFreq1=107
+;AltFreq2=107
+;AltFreq3=107
+;AltFreq4=107
+;AltFreq5=107
+;AltFreq6=107
+;AltFreq7=107
+;AltFreq8=107
+;AltFreq9=107
+;AltFreq10=107
+;AltFreq11=107
+;AltFreq12=107
+;AltFreq13=107
+;AltFreq14=107
+;AltFreq15=107
+;AltFreq16=107
+;AltFreq17=107
+;AltFreq18=107
+;AltFreq19=107
+;AltFreq20=107
+;AltFreq21=107
+;AltFreq22=107
+;AltFreq23=107
+;AltFreq24=107
+;AltFreq25=107
+;DecoderInfo=3
+;MusicSpeech=1
+;Date=
+;Time=
+;UTCOffset=39
+;Cont=
+;DPSRate=0
+;DPSMode=0
+;MasterLog=Yes
+;Aux1Log=No
+;Aux2Log=Onair
+;VLog101=No
+;VLog102=No
+;VLog103=No
+;VLog104=No
+;VLog105=No
+;VLog106=No
+;VLog107=No
+;VLog108=No
+;VLog109=No
+;VLog110=No
+;VLog111=No
+;VLog112=No
+;VLog113=No
+;VLog114=No
+;VLog115=No
+;VLog116=No
+;VLog117=No
+;VLog118=No
+;VLog119=No
+;VLog120=No
diff --git a/apis/pypad/scripts/pypad_nautel.py b/apis/pypad/scripts/pypad_nautel.py
new file mode 100644
index 00000000..a88d7359
--- /dev/null
+++ b/apis/pypad/scripts/pypad_nautel.py
@@ -0,0 +1,175 @@
+#!/usr/bin/python3
+
+# pypad_nautel.py
+#
+# Send Now & Next updates to an Nautel FM Transmitter as TCP for RDS
+#
+#   (C) Copyright 2018 Fred Gleason <fredg@paravelsystems.com>
+#                 2020 Eric Adler <eric@whrwfm.org>
+#
+#   This program is free software; you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License version 2 as
+#   published by the Free Software Foundation.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public
+#   License along with this program; if not, write to the Free Software
+#   Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+#
+
+import sys
+import socket
+import configparser
+import pypad
+import time
+
+def eprint(*args,**kwargs):
+    print(*args,file=sys.stderr,**kwargs)
+
+
+def sendvar(var):
+    if(len(var)!=0):
+        send_sock=socket.socket(socket.AF_INET,socket.SOCK_STREAM)
+        send_sock.connect((ipaddr,port))
+        send_sock.sendall(var.encode('utf-8'))
+        send_sock.close()
+
+def getval(val, update, section):
+    try:
+        configval = update.config().get(section,val)
+    except:
+        configval = ''
+    return configval
+
+def encode(srcdata, fieldname, update):
+    if(len(srcdata)!=0):
+        enc=fieldname+'='+update.resolvePadFields(srcdata,pypad.ESCAPE_NONE)+'\r\n'
+    else:
+        enc=''
+    return enc
+
+def getval_encode(sourcename, fieldname, update, section):
+    return encode(getval(sourcename, update, section), fieldname, update)
+
+def ProcessPad(update):
+    n=1
+    section='Rds'+str(n)
+    while(update.config().has_section(section)):
+        if update.shouldBeProcessed(section) and update.hasPadType(pypad.TYPE_NOW):
+            dps=''
+            dps=getval_encode('DynamicPS',"DPS",update,section)
+            ps=getval_encode('ProgramService',"PS",update,section)
+            text=getval_encode('RadioText',"TEXT",update,section)
+            picode=getval_encode('PICode',"PI",update,section)
+            pty=getval_encode('ProgramType',"PTY",update,section)
+            ptyn=getval_encode('ProgramTypeName',"PTYN",update,section)
+            trp=getval_encode('TrafficProgram',"TP",update,section)
+            tra=getval_encode('TrafficAnnouncement',"TA",update,section)
+            af1=getval_encode('AltFreq1',"AF1",update,section)
+            af2=getval_encode('AltFreq2',"AF2",update,section)
+            af3=getval_encode('AltFreq3',"AF3",update,section)
+            af4=getval_encode('AltFreq4',"AF4",update,section)
+            af5=getval_encode('AltFreq5',"AF5",update,section)
+            af6=getval_encode('AltFreq6',"AF6",update,section)
+            af7=getval_encode('AltFreq7',"AF7",update,section)
+            af8=getval_encode('AltFreq8',"AF8",update,section)
+            af9=getval_encode('AltFreq9',"AF9",update,section)
+            af10=getval_encode('AltFreq10',"AF10",update,section)
+            af11=getval_encode('AltFreq11',"AF11",update,section)
+            af12=getval_encode('AltFreq12',"AF12",update,section)
+            af13=getval_encode('AltFreq13',"AF13",update,section)
+            af14=getval_encode('AltFreq14',"AF14",update,section)
+            af15=getval_encode('AltFreq15',"AF15",update,section)
+            af16=getval_encode('AltFreq16',"AF16",update,section)
+            af17=getval_encode('AltFreq17',"AF17",update,section)
+            af18=getval_encode('AltFreq18',"AF18",update,section)
+            af19=getval_encode('AltFreq19',"AF19",update,section)
+            af20=getval_encode('AltFreq20',"AF20",update,section)
+            af21=getval_encode('AltFreq21',"AF21",update,section)
+            af22=getval_encode('AltFreq22',"AF22",update,section)
+            af23=getval_encode('AltFreq23',"AF23",update,section)
+            af24=getval_encode('AltFreq24',"AF24",update,section)
+            af25=getval_encode('AltFreq25',"AF25",update,section)
+            di=getval_encode('DecoderInfo',"DI",update,section)
+            mus=getval_encode('MusicSpeech',"MS",update,section)
+            dat=getval_encode('Date',"DATE",update,section)
+            tim=getval_encode('Time',"DATE",update,section)
+            utco=getval_encode('UTCOffset',"UTC",update,section)
+            cont=getval_encode('Cont',"CT",update,section)
+            dpsr=getval_encode('DPSRate',"DPSR",update,section)
+            dpsm=getval_encode('DPSMode',"DPSM",update,section)
+
+
+
+            #
+            # Use TCP output
+            #
+            waittime=int(update.config().get(section,'Delay'))
+            time.sleep(waittime)
+            ipaddr=update.config().get(section,'IpAddress')
+            port=int(update.config().get(section,'TcpPort'))
+            sendvar(dps)
+            sendvar(ps)
+            sendvar(text)
+            
+            sendvar(picode)
+            sendvar(pty)
+            sendvar(ptyn)
+            sendvar(trp)
+            sendvar(tra)
+            sendvar(af1)
+            sendvar(af2)
+            sendvar(af3)
+            sendvar(af4)
+            sendvar(af5)
+            sendvar(af6)
+            sendvar(af7)
+            sendvar(af8)
+            sendvar(af9)
+            sendvar(af10)
+            sendvar(af11)
+            sendvar(af12)
+            sendvar(af13)
+            sendvar(af14)
+            sendvar(af15)
+            sendvar(af16)
+            sendvar(af17)
+            sendvar(af18)
+            sendvar(af19)
+            sendvar(af20)
+            sendvar(af21)
+            sendvar(af22)
+            sendvar(af23)
+            sendvar(af24)
+            sendvar(af25)
+            sendvar(di)
+            sendvar(mus)
+            sendvar(dat)
+            sendvar(tim)
+            sendvar(utco)
+            sendvar(cont)
+            sendvar(dpsr)
+            sendvar(dpsm)
+
+
+        n=n+1
+        section='Rds'+str(n)
+
+#
+# 'Main' function
+#
+# Create Send Socket
+#
+
+rcvr=pypad.Receiver()
+try:
+    rcvr.setConfigFile(sys.argv[3])
+except IndexError:
+    eprint('pypad_inno713.py: USAGE: cmd <hostname> <port> <config>')
+    sys.exit(1)
+rcvr.setPadCallback(ProcessPad)
+rcvr.start(sys.argv[1],int(sys.argv[2]))