2019-01-05 Fred Gleason <fredg@paravelsystems.com>

* Added a 'pypad_xmpad.py' PyPAD script.
	* Removed the 'rlm_xmpad' RLM.

apis/PyPAD/scripts/pypad_xmpad.exemplar

@@ -0,0 +1,115 @@
+; This is the configuration for the 'pypad_xmpad.py' script for 
+; Rivendell, which can be used to output Now & Next data for an XM
+; Satellite Radio channel.
+;
+; NOTE: The serial ports configured here have NOTHING TO DO with the 
+;       ports configured in rdadmin(1)!  These ports are used strictly by this
+;       script, and will not be usable by any other Rivendell component.
+
+; Section Header
+;
+; One per serial device to be configured, starting with 'Serial1' and 
+; working up consecutively
+[Serial1]
+
+; Serial Device
+; 
+; The device file that corresponds to the serial device. 
+;Device=/dev/ttyS0
+Device=/dev/ttyUSB0
+
+; Serial Baud Rate (in bps)
+Speed=4800
+
+; Parity (0=none, 1=even, 2=odd)
+Parity=0
+
+; Number of bits per data 'word'.
+WordSize=8
+
+; Program ID
+; A unique integer value, assigned by XM
+ProgramID=1000000005
+
+; Format Strings.  There is one for each line of PAD data (total=2).  
+; The string is output each time RDAirPlay changes
+; play state, including any wildcards as placeholders for metadata values.
+;
+; The list of available wildcards can be found in the 'Metadata Wildcards'
+; appendix in the Rivendell Operations Guide.
+;
+FormatString1=%t
+FormatString2=%a
+
+; Display Size.  The maximum length of text to be sent for each line.
+DisplaySize1=8
+DisplaySize2=10
+
+; Record Flag.  Set to 'Yes' to allow recording, or 'No' to disable.
+Recording=Yes
+
+; Heartbeat Interval.  Should normally be set to '30'.
+HeartbeatInterval=30
+
+; Log Selection
+;
+; Set the status for each log to 'Yes', 'No' or 'Onair' to indicate whether
+; state changes on that log should be output on this serial port.  If set
+; to 'Onair', then output will be generated only if RDAirPlay's OnAir flag
+; is active.
+MasterLog=Yes
+Aux1Log=Yes
+Aux2Log=Yes
+VLog101=No
+VLog102=No
+VLog103=No
+VLog104=No
+VLog105=No
+VLog106=No
+VLog107=No
+VLog108=No
+VLog109=No
+VLog110=No
+VLog111=No
+VLog112=No
+VLog113=No
+VLog114=No
+VLog115=No
+VLog116=No
+VLog117=No
+VLog118=No
+VLog119=No
+VLog120=No
+
+
+; Additional serial ports can be configured by adding new sections...
+;[Serial2]
+;Device=/dev/ttyS1
+;Speed=4800
+;Parity=0
+;WordSize=8
+;FormatString1=%t
+;FormatString2=%a
+;MasterLog=Yes
+;Aux1Log=No
+;Aux2Log=Onair
+;VLog101=No
+;VLog102=No
+;VLog103=No
+;VLog104=No
+;VLog105=No
+;VLog106=No
+;VLog107=No
+;VLog108=No
+;VLog109=No
+;VLog110=No
+;VLog111=No
+;VLog112=No
+;VLog113=No
+;VLog114=No
+;VLog115=No
+;VLog116=No
+;VLog117=No
+;VLog118=No
+;VLog119=No
+;VLog120=No